PDF下载 分享
[1]赵紫怡,王晓丽*,周 鑫. 铜/镍-金刚石旋转圆柱复合电沉积的研究进展 [J].电镀与精饰,2023,(3):75-82.[doi:10.3969/j.issn.1001-3849.2023.03.011]
　Zhao Ziyi,Wang Xiaoli*,Zhou Xin.Research progress of Cu/Ni-diamond rotating cylinder composite electrodeposition[J].Plating & Finishing,2023,(3):75-82.[doi:10.3969/j.issn.1001-3849.2023.03.011]
点击复制

铜/镍-金刚石旋转圆柱复合电沉积的研究进展

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG] 卷: 期数: 2023年3 页码: 75-82 栏目: 出版日期: 2023-03-15
Title:
Research progress of Cu/Ni-diamond rotating cylinder composite electrodeposition
作者:
（江苏海洋大学 机械工程学院，江苏 连云港 222005）
Author(s):
（School of Mechanical Engineering， Jiangsu Ocean University， Lianyungang 222005， China）
关键词:
铜 / 镍 - 金刚石; 旋转圆柱电沉积; 微型铣削刀具
Keywords:
Cu/Ni-diamond ;  rotating cylinder electrodeposition ;  micro-milling tool
分类号:
T19
DOI:
10.3969/j.issn.1001-3849.2023.03.011
文献标志码:
A
摘要:
铜 - 金刚石复合镀层用于电火花加工的工作电极，可以提高电极在电火花加工中的耐久性；镍 - 金刚石复合镀层用于硬脆材料的精加工，能提高精度且不损伤材料。本文总结了影响镀层性能的诸多因素，分析了铜 / 镍 - 金刚石复合电沉积研究现状，介绍了旋转式电极的复合电沉积发展进程，采用旋转圆柱电极方式的复合电沉积工艺可以细化晶粒， 抑制边缘效应，提高镀层质量。因此，铜 / 镍 - 金刚石旋转圆柱复合电沉积的研究将有利于旋转刀具镀层的制备，发展前景广阔。
Abstract:
： Cu-diamond composite coating is used for working electrodes to improve its durability in electrical discharge machining ， while Ni-diamond composite coating is used for finishing hard and brittle materials to improve the accuracy without damaging the material. In this paper ， the factors affecting the coating performance were summarized ， the research status of Cu/Ni-diamond composite electrodeposition was analyzed ， and the development process of composite electrodeposition of rotating electrode was introduced. The composite electrodeposition process using the rotating cylinder electrode method can refine the grains ， suppress edge effects ， and improve the coating quality. Therefore ， the study of Cu/Ni-diamond rotating cylinder composite electrodeposition will be conducive to the preparation of rotating tool coating and has bright prospect.

参考文献/References:


[1] 李远会, 郭忠诚, 万明攀, 等. 电镀制备电接触材料的研究进展[J]. 电镀与环保, 2015, 35(3): 6-8.
[2] 郭忠诚. 脉冲复合电沉积的理论与工艺[M]. 北京: 冶金工业出版社, 2009.
王海航, 马玉平, 武晓龙, 等. 金刚石涂层激光抛光机理及加工工艺研究进展[J]. 材料保护, 2021, 54(16):136-146.
[4] 李远会, 郭忠诚, 万明攀, 等. 电镀制备电接触材料的研究进展[J]. 电镀与环保, 2015, 35(3): 6-8.
[5] 郭忠诚. 脉冲复合电沉积的理论与工艺[M]. 北京:冶金工业出版社, 2009.
[6] 曹琳, 李双建, 王永喆, 等. 镍基与铜基碳化硅复合镀层制备技术发展现状[J]. 热喷涂技术, 2020, 12(2): 1-10.
[7] 高超, 王生, 吴国荣, 等. 电镀金刚石砂带磨削氧化铝陶瓷的试验研究[J]. 工具技术, 2017, 51(10): 40-43.
[8] Deng J, Zhang J, Tu Y, et al. Effect of BEO in the electrodeposition process of Ni/diamond composite coatings for preparation of ultra-thin dicing blades: Experiments and theoretical calculations [J]. Ceramics International, 2018, 44(14): 16828-16836.
[9] Wu Y, Sun Y, Luo J, et al. Microstructure of Cu-diamond composites with near-perfect interfaces prepared via electroplating and its thermal properties [J]. Materials Characterization, 2019, 150: 199-206.
[10] 张志梁, 张迎. 钢铁基体无预镀直接强酸性镀铜工艺[J]. 材料保护, 2021, 54(7):89-92
[11] 鲁喜宁, 丁洁琼, 余世杰. 钻具螺纹表面镀镍钨合金的应用研究 [J]. 材料保护, 2021, 54(4): 145-148.
[12] 耿楠, 刘慧丛, 李卫平. 代铬复合电沉积研究现状与影响因素分析[J]. 表面技术, 2019, 48(10): 1-12.
[13] Sharp W F. Properties and applications of composite diamond coatings [J]. Wear, 1975, 32(3): 315-325.
[14] 马如龙, 彭超群, 王日初, 等. Cu-金刚石复合镀层的制备[J]. 中国有色金属学报, 2015, 15(12): 3414-3421.
[15] 高龙, 刘继拓, 闫泽鹏, 等. 铜-金刚石复合镀层金刚石颗粒复合量的研究[J]. 金刚石与磨料磨具工程, 2017, 37(4): 44-47.
[16] 王晓丽, 顾海, 周昭昌, 等. 铜镀层工艺参数优化的正交实验研究[J]. 电镀与精饰, 2018, 40(12): 19-25.
[17] 杜楠, 周海飞, 赵晴, 等. Ni-金刚石复合电沉积的界面作用力及其对复合量的影响[J]. 材料工程, 2008, 2: 23-30.
[18] Huang M, Eckert T K, Mutschke U G. Magnetic-field- assisted electrodeposition of metal to obtain conically structured ferromagnetic layers [J]. Electrochimica Acta, 2020, 365: 2-16.
[19] 周海飞, 钱洲亥, 祝郦伟, 等. 搅拌在Ni-diamond复合电沉积中的电化学行为[J]. 稀有金属材料与工程, 2014, 43(2): 470-473.
[20] 刘美华, 刘洪南, 王东爱, 等. 电沉积参数对镍-纳米金刚石复合镀层性能的影响[J]. 材料保护, 2018, 51(1): 62-66.
[21] Wei Y Y, Li W P, Liu H C, et al. Effects of submicron diamonds on the growth of copper in Cu-diamond co- deposition [J]. International Journal of Minerals, Metallurgy, and Materials, 2012, 19(1): 72-76.
[22] Huang W, Zhao Y, Wang X. Preparing a high-particle-content Ni/diamond composite coating with strong abrasive ability [J]. Surface and Coatings Technology, 2013, 235: 489-494.
[23] Awasthi S, Goel S, Pandey C P, et al. Multi-length scale tribology of electrophoretically deposited nickel- diamond coatings [J]. Journal of Metals, 2016, 69(2): 227-235.
[24] Wang X, Chou C C, Yang Y C, et al. Tribological and mechanical properties of Cu/Ni-microdiamond bilayers on brass substrates coated by composite electrodeposition technology [J]. Surface Topography: Metrology and Properties, 2020, 8(2): 1-14.
[25] Wang X, Chou C C, Lee J W, et al. Preparation and investigation of diamond-incorporated copper coatings on a brass substrate by composite electrodeposition [J]. Surface and Coatings Technology, 2020, 386: 1-9.
[26] 王昱开. 不锈钢工具电镀金刚石工艺研究[J]. 电镀与精饰, 2021, 43(3): 6-9.
[27] Eisenberg M, Tobias C W, Wilke C R. Ionic mass transfer and concentration polarization at rotating electrodes [J]. Journal of the Electrochemical Society, 1954, 101(6): 306-320.
[28] Gabe D R. The rotating cylinder electrode [J]. Journal of Applied Electrochemistry, 1974, 4: 91-108.
[29] Gabe D R, Walsh F C. The rotating cylinder electrode: a review of development [J]. Journal of Applied Electrochemistry, 1983, 13: 3-21.
[30] 许文林, 王雅琼. 王树勇. 旋转圆柱电极电化学反应器[J]. 山西石化, 1993, 4: 55-57.
[31] Gabe D R, Wilcox G D, González-García J, et al. The rotating cylinderelectrode: its continued development and application [J]. Journal of Applied Electrochemistry, 1998, 28: 759-780.
[32] Shao W Z, Ivanov V V, Zhen L, et al. A study on graphitization of diamond in copper-diamond composite materials [J]. Materials Letters, 2004, 58: 146-149.
[33] Low C T J. The rotating cylinder electrode (RCE) and its application to the electrodeposition of metals [J]. Australian Journal of Chemistry, 2005, 58: 246-262.
[34] Chang J H, Hsu F Y, Liao M J, et al. A study of direct- and pulse-current chromium electroplating on rotating cylinder electrode (RCE) [J]. Applied Surface Science, 2007, 253(16): 6829-6834.
[35] Rivera F F, Nnava J L. Mass transport studies at rotating cylinder electrode (RCE) [J]. Electrochimica Acta, 2007, 52(19): 5868-5872.
[36] Moti E, Shariat M H, Bahrololoom M E. Electrodeposition of nanocrystalline nickel by using rotating cylindrical electrodes [J]. Materials Chemistry and Physics, 2008, 111: 469-474.
[37] Allanore A, Lavelaine H, Birat J P, et al. Experimental investigation of cell design for the electrolysis of iron oxide suspensions in alkaline electrolyte [J]. Journal of Applied Electrochemistry, 2010, 40(11): 1957-1966.
[38] Rivero E P, Granados P, Rivera F F, et al. Mass transfer modeling and simulation at a rotating cylinder electrode (RCE) reactor under turbulent flow for copper recovery [J]. Chemical Engineering Science, 2010, 65(10): 3042-3049.
[39] Pérez T, Nava J L. Numerical simulation of the primary, secondary and tertiary current distributions on the cathode of a rotating cylinder electrode cell. Influence of using plates and a concentric cylinder as counter electrodes [J]. Journal of Electroanalytical Chemistry, 2014, 719: 106-112.
[40] Choi Y, Kim D, Son K, et al. Effect of added dispersants on diamond particles in Ni-diamond composites fabricated with electrodeposition [J]. Metals and Materials International, 2015, 21(6): 977-984.
[41] Walsh F C, Kera G, Nahlé A H, et al. The rotating cylinder electrode for studies of corrosion engineering and protection of metals-An illustrated review [J]. Corrosion Science, 2017, 123: 1-20.
[42] Luo S, Guo H, Zhang S, et al. Efficient production of metal manganese achieved by cylindrical and rotary electrode [J]. Journal of Cleaner Production, 2021, 326: 1-4

备注/Memo

收稿日期： 2021-06-21 修回日期： 2021-07-04 作者简介： 赵紫怡（ 1988 —），女，硕士研究生， email ： 290257031@qq.com 通信作者： 王晓丽（ 1978 —），副教授， email ： 2006000018@jou.edu.cn 基金项目： 江苏省研究生科研创新实践活动项目（ KYCX21-3141 ）；江苏省海洋资源研究院（连云港）开放课题（ JSIMR202022 ）；连云港市“海燕计划”项目。

更新日期/Last Update: 2023-02-20