[1]刘新龙,陈 燕,张国富,等.电解-旋转超声磁粒复合对Tc4板抛光的研究[J].电镀与精饰,2019,(10):13-16.[doi:10.3969/j.issn.1001-3849.2019.10.004]
　LIU Xinlong,CHEN Yan,ZHANG Guofu,et al.Study on Polishing of Tc4 Plate by Electrolysis-Rotating Ultrasound Magnetic Particle Composite[J].Plating & Finishing,2019,(10):13-16.[doi:10.3969/j.issn.1001-3849.2019.10.004]
点击复制

电解-旋转超声磁粒复合对Tc4板抛光的研究()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2019年10
页码:
13-16
栏目:
出版日期:
2019-10-15

文章信息/Info

Title:
Study on Polishing of Tc4 Plate by Electrolysis-Rotating Ultrasound Magnetic Particle Composite
作者:
刘新龙; 陈 燕; 张国富; 王 杰
辽宁科技大学 机械工程与自动化学院，辽宁 鞍山 114051
Author(s):
LIU Xinlong;  CHEN Yan;  ZHANG Guofu;  WANG Jie
School of Mechanical Engineering and Automation，University of Science and Technology Liaoning, Anshan 114051, China
关键词:
Tc4板材; 电解-旋转超声磁粒复合研磨; 表面粗糙度; 表面残余应力
Keywords:
Tc4 sheet;  electrolysis-rotating ultrasonic magnetic particle composite grinding;  surface roughness;  surface residual stress
DOI:
10.3969/j.issn.1001-3849.2019.10.004
文献标志码:
A
摘要:
为了改善Tc4钛合金板材制造零部件的表面质量，降低其表面粗糙度，提出了一种高效率的电解-旋转超声磁粒复合研磨抛光方法。设计了电解-旋转超声磁粒复合研磨抛光的实验装置，对不同加工工艺下所得的合金表面的表面粗糙度、表面残余应力进行分析。结果表明，经过20 min加工后，复合研磨使表面粗糙度由1.92 μm降至0.09 μm，改善了表面质量。表面残余应力由+186 MPa 转变为-51 MPa，即由拉应力变为压应力，获得更好的表面应力状态。
Abstract:
In order to improve the surface quality and reduce the surface roughness of parts made of Tc4 titanium alloy sheet, an electrolysis-rotating ultrasonic magnetic particle composite grinding method was proposed. The experimental device for the method was designed, and the surface roughness and residual stress of the worked alloy with the device under different processing technic were analyzed. The results showed that the surface roughness reduced from 1.92 μm to 0.09 μm by composite grinding after 20 minutes processing time, which improved the surface quality. The residual stress on the surface was changed from +186 MPa to -51 MPa, it meant the form of stress was changed from tensile stress to compressive stress, which could provide a better state of surface stress.

参考文献/References:

[1] 吕冬兰.钛合金在民用飞机上的应用及发展趋势[J]. 世界有色金属,2018, 5:230-231.
[2] 邹松华,王帅东,李曼,等.TC4钛合金电镀镍工艺及镀层性能[J]. 电镀与涂饰, 2016, 35(12):626-628.
[3] 邢绍美.TC4钛合金的平面磨削[J]. 航天工艺,2001, 3:51-54.
[4] 许召宽,韩冰,陈燕,等.基于电解-磁力复合研磨法的表面光整加工[J]. 电镀与精饰,2018,40(12):7-10.
[5] 廖明,韩冰,陈燕,等.钛合金管内表面的电化学磁力研磨复合光整试验[J]. 中国表面工程,2016,29(3):123-131.
[6] 李琳琳,顾翔,朱永伟.微细旋转超声加工材料去除机理及试验[J]. 宇航材料工艺,2018,48(3):78-81.
[7] 曾加恒,陈燕,张科丙,等.旋转超声辅助磁力研磨镍基合金参数优化设计及分析[J]. 表面技术,2018,47(11):274-280.
[8] 谭悦,陈燕,曾加恒,等.电解-磁力复合研磨TA18钛合金管内表面研究[J]. 组合机床与自动化加工术,2018(2):140-142+147.
[9] Du Z W, Chen K, Zhou C L. Research on the electrolytic-magnetic abrasive finishing of nickel-based superalloy GH4169[J]. The International Journal of Advanced Manufacturing Technology, 2015, 81(5-8): 897-903.
[10] Xu S, Zou Y H. Development of magnetic abrasive finishing combined with electrolytic process for finishing SUS304 stainless steel plane[J]. The International Journal of Advanced Manufacturing Technology, 2017, 92 (9-12):3373-3384.
[11] 张龙龙,焦安源,刘新龙,等.电解-磁粒复合研磨对TCTC4孔棱边毛刺的光整加工[J]. 电镀与精饰,2018,40(10):1-5.
[12] 田腾腾,陈燕,谭悦,等.电解-磁力研磨钛合金的工艺参数优化[J]. 电镀与精饰,2018,40(1):27-30.
[13] 谭悦,于克强,陈燕,等.电解-磁力复合研磨镍基高温合金实验研究[J]. 电镀与精饰,2017,39(12):1-4.

备注/Memo

备注/Memo:
收稿日期： 2019-01-31；修回日期： 2019-05-25
通讯作者：陈燕（1963-），女，博士，教授，研究方向为精密加工，Email：laochen412@gmail.com
基金项目：国家自然科学基金（51775258、51105178），辽宁省教育厅基金项目（2016HZPY10）
更新日期/Last Update: 2019-10-10