[1]杨 堃*,张 明,孙小岚.TC2、TC6表面喷涂WC-17Co与电镀铬耐磨性能对比[J].电镀与精饰,2021,(10):26-30.[doi:10.3969/j.issn.1001-3849.2021.10.005]
　YANG Kun*,ZHANG Ming,SUN Xiaolan.Wear Resistant Comparison of Spraying WC-17Co Coating and Chromium Plating on the Surface of TC2 and TC6[J].Plating & Finishing,2021,(10):26-30.[doi:10.3969/j.issn.1001-3849.2021.10.005]
点击复制

TC2、TC6表面喷涂WC-17Co与电镀铬耐磨性能对比()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2021年10
页码:
26-30
栏目:
出版日期:
2021-10-15

文章信息/Info

Title:
Wear Resistant Comparison of Spraying WC-17Co Coating and Chromium Plating on the Surface of TC2 and TC6
作者:
杨 堃1*; 张 明2; 孙小岚1
1.沈阳飞机工业（集团）有限公司，辽宁 沈阳 110850；2.空军装备部驻沈阳地区第一军事代表室，辽宁 沈阳 110031
Author(s):
YANG Kun1*;  ZHANG Ming2;  SUN Xiaolan1
1. AVIC Shenyang Aircraft Corporation， Shenyang 110850， China； 2. Air Force Equipment Department First Military Representative Office in Shenyang， Shenyang 110031， China
关键词:
WC-17Co; 电镀铬; 钛合金; 耐磨性
Keywords:
WC-17Co chromium plating titanium alloy wear resistance
DOI:
10.3969/j.issn.1001-3849.2021.10.005
文献标志码:
A
摘要:
TC2、TC6钛合金是航空领域中常用的选材，为了增加钛合金配合表面的耐磨性能，对钛合金表面进行超音速火焰喷涂碳化钨，研究对比TC2、TC6钛合金表面喷涂WC-17Co和镀硬铬的摩擦性能。结果表明：表面喷涂WC-17Co可获得致密表面，孔隙率小于0.5 %，同时耐磨性能显著提高。
Abstract:
TC2 and TC6 titanium alloys are commonly used in the aerospace field. In order to increase the wear resistance of titanium alloy mating surface, the surface of titanium alloy was sprayed with supersonic flame tungsten carbide, and the friction properties of TC2 and TC6 titanium alloy by spraying WC-17Co and hard chromium plating were compared. The results showed that a compact surface can be obtained by spraying WC-17Co, the porosity was less than 0.5 %, and the wear resistance was significantly improved.

参考文献/References:

[1] 郭华锋, 李菊丽. TC4钛合金表面等离子喷涂Ni基WC涂层的组织及性能分析[J]. 中国表面工程, 2013, 26(2): 21-28.
Guo H F, Li J L. Microstructure and performance of Ni-based WC coating prepared by plasma spraying on TC4 titanium alloy surface[J]. China Surface Engineering, 2013, 26(2): 21-28 (in Chinese).
[2] 李博. 一种钛合金零件异形面喷涂碳化钨工艺研究[J]. 焊接技术, 2017, 46(12): 50-52.
Li B. Study on fatigue performance of joint in bainite and pearlescent rail by flash butt welding[J]. Welding Technology, 2017, 46(12): 50-52 (in Chinese).
[3] 王群, 屈帮荣, 唐瞾肸, 等. 超音速火焰喷涂碳化钨-钴涂层磨粒磨损行为[J]. 中国有色金属学报, 2015,25(7): 1920-1928.
Wang Q, Qu B R, Tang Z X, et al. Abrasive wear behavior of WC-Co coating deposited by high velocity oxygen flame process[J]. The Chinese Journal of Nonferrous Metals, 2015, 25(7): 1920-1928 (in Chinese).
[4] Xue Q J. Progress in Chinese tribology research and application[J]. Science and Technology Review, 2008, 26(23): 1.
[5] 何奖爱, 王玉玮. 材料磨损与耐磨材料[M]. 沈阳: 东北大学出版社, 2001: 4-5.
[6] 汤智慧, 王长亮, 贡兴嘉, 等. 电镀硬铬工艺对TC6钛合金性能的影响研究[J]. 航空材料学报, 2012, 4: 20-25.
Tang Z H, Wang C L, Gong X J, et al. Effects of hard chromium electroplating on performance of TC6 titanium alloy[J]. Journal of Aeronautical Materials, 2012, 4: 20-25 (in Chinese).
[7] 裴延波. WC-Co 涂层的发展现状与展望[J]. 石油化工腐蚀与防护, 2011, 28(1): 1-4.
Pei Y B. Development status and prospect of WC-Co coating[J]. Corrosion＆Protection in Petrochemical Industry, 2011, 28(1): 1-4 (in Chinese).
[8] 白智辉, 高峰, 王大峰, 等. 不同颗粒度碳化钨的WC-17Co等离子涂层组织及摩擦学特性研究[J]. 热喷涂技术, 2015, 7(3): 48-53.
Bai Z H, Gao F, Wang D F, et al. Research on different particle size of tungsten carbide on organization and the tribological characteristics of plasma sprayed WC-17Co coating[J]. Thermal Spray Technology, 2015, 7(3): 48-53 (in Chinese).
[9] 姬寿长, 李争显, 李京龙, 等. 钛表面厚碳化钨涂层研究进展[J]. 钛工业进展, 2018, 35(6): 20-25.
Ji S C, Li Z X, Li J L, et al. Research status quo of thick WC coating on titanium alloy surface[J]. Titanium Industry Progress, 2018, 35(6): 20-25 (in Chinese).

相似文献/References:

[1]郭敏智,谢焕钧,李立群.镀前处理对GH4169电镀铬的影响[J].电镀与精饰,2022,(6):7.[doi:10.3969/j.issn.1001-3849.2022.06.002]
　GUO Minzhi,XIE Huanjun,LI Liqun.Effect of Pretreatment on Chromium Electroplating of GH4169[J].Plating & Finishing,2022,(10):7.[doi:10.3969/j.issn.1001-3849.2022.06.002]
[2]孟保利,高晓颖*,郑 超,等.多次电镀铬对30CrMnSiNi2A疲劳寿命和氢脆性能的影响[J].电镀与精饰,2023,(5):65.[doi:10.3969/j.issn.1001-3849.2023.05.009]
　Meng Baoli,Gao Xiaoying*,Zheng Chao,et al.Influence of repeated chromium plating on fatigue life and hydrogen embrittlement performance of 30CrMnSiNi2A[J].Plating & Finishing,2023,(10):65.[doi:10.3969/j.issn.1001-3849.2023.05.009]
[3]吴 畏*,陈腊梅,张丹丹,等. 镁锂合金微弧氧化的研究进展[J].电镀与精饰,2023,(5):71.[doi:10.3969/j.issn.1001-3849.2023.05.010]
　Wu Wei*,Chen Lamei,Zhang Dandan,et al.Influence of repeated chromium plating on fatigue life and hydrogen embrittlement performance of 30CrMnSiNi2A[J].Plating & Finishing,2023,(10):71.[doi:10.3969/j.issn.1001-3849.2023.05.010]
[4]王浩军,高晓颖*,周雁文,等.doi: 10.3969/j.issn.1001-3849.2025.05.007基于有限元计算的滑轨电镀工装设计与优化[J].电镀与精饰,2025,(05):45.
　Wang Haojun,Gao Xiaoying *,Zhou Yanwen,et al.Design and optimization of sliding rail electroplating tooling based on finite element calculation[J].Plating & Finishing,2025,(10):45.
[5]汪 祥,靳 磊,等.doi: 10.3969/j.issn.1001-3849.2025.08.007钢质零件三价铬与传统六价铬电镀对比研究[J].电镀与精饰,2025,(08):41.
　Wang Xiang,Jin Lei,*,et al.Comparative study of trivalent chromium and traditional hexavalent chromium electroplating for steel parts[J].Plating & Finishing,2025,(10):41.
[6]高晓颖,郭全庆,王浩军,等.doi: 10.3969/j.issn.1001-3849.2026.04.004螺栓电镀工艺有限元仿真及其工装设计[J].电镀与精饰,2026,(04):25.
　GAO Xiaoying,GUO Quanqing,WANG Haojun,et al.Finite element simulation and tooling design of bolt electroplating process[J].Plating & Finishing,2026,(10):25.

备注/Memo

备注/Memo:
收稿日期： 2020-12-13；修回日期： 2021-02-14
通信作者： 杨堃（1986—），男，硕士研究生，高级工程师，从事表面处理工作。email：hahayangkun@163.com
更新日期/Last Update: 2021-10-10