[1]赵金航*,李博.一种超高强度钢镀硬铬新工艺研究[J].电镀与精饰,2022,(4):16-19.[doi:10.3969/j.issn.1001-3849.2022.04.004]
　ZHAO Jinhang *,LI Bo.Study on a New Process of Hard Chromium Plating on Ultra-High Strength Steel[J].Plating & Finishing,2022,(4):16-19.[doi:10.3969/j.issn.1001-3849.2022.04.004]
点击复制

一种超高强度钢镀硬铬新工艺研究()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2022年4
页码:
16-19
栏目:
出版日期:
2022-04-15

文章信息/Info

Title:
Study on a New Process of Hard Chromium Plating on Ultra-High Strength Steel
作者:
赵金航*; 李博
（中航飞机起落架有限责任公司，陕西 汉中 723200）
Author(s):
ZHAO Jinhang * ;  LI Bo
( AVIC Landing Gear Advanced Manufacturing Co. Ltd. Hanzhong 723200 China )
关键词:
300M 钢; 镀硬铬; 分析
Keywords:
300M steel; ??ard-chrome?plating;  analysis
分类号:
TQ153.1
DOI:
10.3969/j.issn.1001-3849.2022.04.004
文献标志码:
A
摘要:
现代飞机起落架高寿命、高可靠的要求促使了 300M 超高强度钢在起落架上的广泛应用，这类钢具有强度高、耐疲劳性能优良、抗应力腐蚀性能好等特点。镀硬铬作为超高强度钢常规工艺应用时间较长，本文讨论一种 300M 钢镀硬铬新工艺，制备的铬镀层表面质量和性能情况良好，对表面处理企业有借鉴作用。
Abstract:
： The requirements of long life and high reliability of modern aircraft landing gear have prompted the wide application of 300M ultra-high strength steel in the landing gear. This type of steel has the characteristics of high strength ， excellent fatigue resistance ， and good stress corrosion resistance. Hard chromium plating has been used as a conventional process for ultra-high-strength steel for a long time. In this paper ， a new hard chromium plating process for 300M steel was discussed ， and chromium coating prepared by the process had a good surface quality and performance. The process could be used as a reference for surface treatment companies.

参考文献/References:



[1] 柳岩 . 锻钢镀硬铬工艺研究 [J]. 电镀与环保 , 2012, 32(6): 21-23.

[2] 刘鹏 , 蔡建平 , 王旭东 , 等 . 飞机起落架材料防护技术现状及研究进展 [J]. 装备环境工程 , 2011, 8(2): 67-71.

[3] 王秋红 , 潘湛昌 , 胡光辉 , 等 . 三价铬电镀铬镀层性能的研究 [J]. 材料研究与应用 , 2010, 4(4): 467-469.

[4] 谭宗剑 . 衬套内孔尺寸镀铬工艺 [J]. 材料保护 , 2004, 37(6): 54-56.

[5] 詹瑞秋 , 吴益文 , 汪宏斌 , 等 . 不同厚度电镀铬层的组织及性能 [J]. 机械工程材料 , 2018, 48(3): 43-47.

[6] 李博 . 控制超高强度钢零件电镀渗氢 , 预防氢脆发生的方法 [J]. 新技术新工艺 , 2015, (9): 100-102.

相似文献/References:

[1]王忠诚*,隋培玲,吕翠峰,等.提高内燃机气门杆部镀硬铬附着力的工艺方法研究[J].电镀与精饰,2023,(7):90.[doi:10.3969/j.issn.1001-3849.2023.07.012]
　Wang Zhongcheng*,Sui Peiling,Lyu Cuifeng,et al.Study on the technology to improve the adhesion of hard chromium plating on the valve stem of internal combustion engine[J].Plating & Finishing,2023,(4):90.[doi:10.3969/j.issn.1001-3849.2023.07.012]

备注/Memo

备注/Memo:
收稿日期： 2019-09-23 修回日期： 2019-12-24 * 通信作者： 赵金航， email ： 363393461@qq.com
更新日期/Last Update: 2022-04-20