[1]凌付平 *.铝合金柠檬酸-硫酸阳极氧化及镍盐-铈盐协同封闭?/div>[J].电镀与精饰,2023,(2):35-41.[doi:10.3969/j.issn.1001-3849.2023.02.006]
　Ling Fuping *.Anodic oxidation of aluminum alloy in citric acid and sulfuric acid electrolyte and synergistic sealing with nickel salt and cerium salt[J].Plating & Finishing,2023,(2):35-41.[doi:10.3969/j.issn.1001-3849.2023.02.006]
点击复制

铝合金柠檬酸-硫酸阳极氧化及镍盐-铈盐协同封闭?/div>
()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2023年2
页码:
35-41
栏目:
出版日期:
2023-02-15

文章信息/Info

Title:
Anodic oxidation of aluminum alloy in citric acid and sulfuric acid electrolyte and synergistic sealing with nickel salt and cerium salt
作者:
凌付平1 2*
（1.江苏航运职业技术学院 教务处，江苏 南通 226010； 2. 南京理工大学 机械工程学院，江苏 南京 210094）
Author(s):
Ling Fuping 1 2*
（1. Academic Affairs Office， Jiangsu Shipping College， Nantong 226010， China； 2. School of Mechanical Engineering， Nanjing University of Science and Technology， Nanjing 210094， China）
关键词:
阳极氧化; 柠檬酸 - 硫酸电解液; 铝合金; 镍盐 - 铈盐; 协同封闭; 耐腐蚀性能
Keywords:
anodic oxidation ;  citric acid and sulfuric acid electrolyte ;  aluminum alloy ;  synergistic sealing ;  nickel salt and cerium salt ;  corrosion resistance
分类号:
TQ153.6
DOI:
10.3969/j.issn.1001-3849.2023.02.006
文献标志码:
A
摘要:
选用 2024 铝合金作为基体，在柠檬酸和硫酸混合电解液中进行阳极氧化，并在镍盐和铈盐混合封闭液中对氧化膜进行协同封闭处理。采用扫描电镜和能谱仪对氧化膜的微观形貌和表面成分进行了表征，并通过静态接触角测试、极化曲线测试和腐蚀失重实验对氧化膜的表面润湿性和耐腐蚀性能进行了分析。结果表明：柠檬酸 - 硫酸氧化膜表面致密性与硫酸氧化膜相比较好，并且经过镍盐封闭、铈盐封闭及镍盐 - 铈盐协同封闭后，柠檬酸 - 硫酸氧化膜的微观形貌、表面成分和表面润湿性发生变化，耐腐蚀性能提高，但是厚度基本不变。相比于镍盐和铈盐分别封闭柠檬酸 - 硫酸氧化膜，镍盐 - 铈盐协同封闭柠檬酸 - 硫酸氧化膜的平整度和致密性更好且呈较好的疏水性，其腐蚀电流密度和腐蚀失重仅为 1.03×10 -7 A·cm -2 和 0.30 g·m -2 ，对铝合金基体的保护效率达到 99.8 % ，能更好地抵抗腐蚀，从而显著提高铝合金的耐腐蚀性能。
Abstract:
： 2024 aluminum alloy was selected as the substrate for anodizing in a mixed electrolyte of c itric acid and sulfuric acid ， and then the oxide film was synergistically sealed in the nickel salt and cerium salt mixed solution. The morphology and surface composition of the oxide films were characterized by scanning electron microscope and energy disperse spectroscopy ， and the surface wettability and corrosion resistance of the oxide films were analyzed by measuring static contact angle ， polarization curve and corrosion weight loss. The results show that the surface compactness of the citric acid-sulfuric acid oxide film is better than that of the sulfuric acid oxide film. After nickel salt sealing ， cerium salt sealing and synergistic sealing with nickel salt and cerium salt ， the microstructure ， surface components and surface wettability of the citric acid-sulfuric acid oxide film are changed ， and the corrosion r esistance is improved ， but the thickness is basically unchanged. Compared with the citric acid-sulfuric acid oxide film after nickel salt sealing and cerium salt sealing respectively ， the citric acid-sulfuric acid oxide film after synergistic sealing with nickel salt and cerium salt has better flatness ， compactness and hydrophobicity. The corrosion current density and corrosion weight loss are only 1.03×10 -7 A·cm -2 and 0.30 g·m -2 ， and the protection efficiency on aluminum alloy substrate reaches 99.8 % ， indicating that the citric acid-sulfuric acid oxide film after synergistic sealing with nickel salt and cerium salt can better resist corrosion and significantly improve the corrosion resistance of aluminum alloy.

参考文献/References:



[1] 王英君 , 刘洪雷 , 王国军 , 等 . 新型高强稀土 Al-Zn-Mg-Cu-Sc 铝合金的阳极氧化及其抗腐蚀性能研究 [J]. 中国腐蚀与防护学报 , 2020, 40(2): 131-138.

[2] 王宏智 , 吴心元 , 吕成斌 , 等 . 3A21 铝合金本色阳极氧化膜的抗霉菌研究 [J]. 电镀与精饰 , 2021, 43(7): 52-55.

[3] Sun H O, Li L C, Wang Z Y, et al. Corrosion behaviors of microarc oxidation coating and anodic oxidation on 5083 aluminum alloy[J]. Journal of Chemistry, 2020(2): 1-11.

[4] Yu Y D, Ge H L, Wei G Y, et al. 2024 aluminum oxide films prepared by the innovative and environmental friendly oxidation technology[J]. Surface Review and Letters, 2020, 27(12): 2050020.

[5] 李小庆 , 唐楷 , 林东 . 2024 铝合金硫酸 - 柠檬酸阳极氧化 及膜层组织性能研究 [J]. 轻合金加工技术 , 2021, 49(9): 46-51.

[6] 崔琳琳 , 庄向仕 , 陈雅兵 . 电流密度对建筑用 6463 铝合金柠檬酸阳极氧化膜性能的影响 [J]. 电镀与精饰 , 2021, 43(8): 1-5.

[7] 邓型深 , 林雲松 , 黄宏庆 , 等 . 草酸 - 柠檬酸中 6061 铝合金的阳极氧化 [J]. 电镀与涂饰 , 2019, 38(9): 417-420.

[8] 孟祥凤 . 铝合金阳极氧化膜的制备及其性能研究 [D]. 杭州 : 中国计量学院 , 2014.

[9] Guo Y F, Zhang K, Liu L, et al. Effects of sealing process by sol-gel technology on corrosion and wear resistance of aluminum anodic oxide film[J]. Transactions of Materials and Heat Treatment, 2014, 35(9): 182-187.

[10] 苏奥 , 王磊 , 陈慧 . 铝锂合金混合酸阳极氧化及无铬封闭研究 [J]. 电镀与精饰 , 2022, 44(1): 22-28.

[11] Munir B, Soedarsono J W, Suharno B, et al. Corrosion resistance enhancement of an anodic layer on an aluminum matrix composite by cerium sealing[J]. International Journal of Technology, 2015, 6(7): 1191.

[12] 刘莉 , 张鲲 , 骆晓伟 , 等 . 铈盐封孔对 6061 铝合金阳极氧化膜耐蚀性的影响 [J]. 腐蚀与防护 , 2016, 37(4): 274-278.

[13] 朱祖芳 . 铝合金阳极氧化与表面处理技术 [M]. 北京 : 化学工业出版社 , 2010.

[14] Ban C L, He Y D, Shao X. Effect of citric acid on microstructure and electrochemical characteristics of high voltage anodized alumina film formed on etched Al foils[J]. Transactions of Nonferrous Metals Society of China, 2011, 21(1): 133-138.

[15] Feng C S, Lu T W, Wang T L, et al. A novel high-entropy amorphous thin film with high electrical resistivity and outstanding corrosion resistance[J]. Acta Metallurgica Sinica (English Letters), 2021(34): 1537-1545.

[16] Ahmadi R, Asadpourchallou N, Kaleji B K. In vitro study: Evaluation of mechanical behavior, corrosion resistance, antibacterial properties and biocompatibility of HAp/TiO 2 /Ag coating on Ti 6 Al 4 V/TiO 2 substrate[J]. Surfaces and Interfaces, 2021(24): 101072.

[17] 党在清 . 镁合金复合镀层的制备及其结构与性能表征 [J]. 电镀与精饰 , 2020, 42(11): 16-19.

[18] 李丽萍 , 周吉成 , 刘元伟 , 等 . 超疏水铝表面的一步法电化学制备及其耐蚀性能研究 [J]. 材料保护 , 2021, 54(6): 117-121.

[19] 张庆华 , 张正旭 , 赵琦 . 锰系磷化处理对汽车传动件材料耐腐蚀性能的影响 [J]. 电镀与精饰 , 2020, 42(5): 38-43.

[20] 史明淑 . SUS304 表面防护性自组装复合膜的制备及其性能研究 [D]. 咸阳 : 西北农林科技大学 , 2016.

相似文献/References:

[1]黄允芳,蔡锡昌.铝型材立式阳极氧化线“两头色差”问题的研究[J].电镀与精饰,2019,(1):33.[doi:10.3969/j.issn.1001?3849.2019.01.007]
　HUANG Yunfang,CAI Xichang.Studies on the Problem of “Color Difference between Two Ends” in the Anodizing Vertical Line for the Aluminum Profile[J].Plating & Finishing,2019,(2):33.[doi:10.3969/j.issn.1001?3849.2019.01.007]
[2]徐方强*,邹松华,张 富,等.硫酸-酒石酸钾钠宽温阳极氧化槽液体系研究[J].电镀与精饰,2019,(12):5.[doi:10.3969/j.issn.1001-3849.2019.12.002]
　XU Fangqiang*,ZOU Songhua,ZHANG Fu,et al.Research of Anodizing at Wide Temperature in Sulfuric Acid-Potassium Sodium Tartrate Bath System[J].Plating & Finishing,2019,(2):5.[doi:10.3969/j.issn.1001-3849.2019.12.002]
[3]黄允芳*,蔡锡昌.铝型材电解着色工艺向环保型工艺转换的研究[J].电镀与精饰,2019,(12):10.[doi:10.3969/j.issn.1001-3849.2019.12.003]
　HUANG Yunfang*,CAI Xichang.Studies on Environmentally Friendly Technology Transformation of Electrolytic Coloring for Al Profile[J].Plating & Finishing,2019,(2):10.[doi:10.3969/j.issn.1001-3849.2019.12.003]
[4]孙慧艳*,王兴雅,孙鹏飞.钛合金蓝色腐蚀检查工艺技术研究[J].电镀与精饰,2020,(1):36.[doi:10.3969/j.issn.1001-3849.2020.01.008]
　SUN Huiyan*,WANG Xingya,SUN Pengfei.Research on the Blue Corrosion Inspection Technology of Titanium Alloy[J].Plating & Finishing,2020,(2):36.[doi:10.3969/j.issn.1001-3849.2020.01.008]
[5]王志明,高用文,陈旭丹,等.汽车行李架铝阳极氧化耐酸碱工艺开发[J].电镀与精饰,2021,(4):35.[doi:10.3969/j.issn.1001-3849.2021.04.008]
　WANG Zhiming,GAO Yongwen,et al.Development of Acid and Alkali Resistant Aluminum Anodizing Process for Automobile Luggage Rack[J].Plating & Finishing,2021,(2):35.[doi:10.3969/j.issn.1001-3849.2021.04.008]
[6]赵光练*,文璞山.电连接器用ZL101A铝合金混合酸阳极氧化及氧化膜的耐蚀性[J].电镀与精饰,2021,(10):31.[doi:10.3969/j.issn.1001-3849.2021.10.006]
　ZHAO Guanglian*,WEN Pushan.Anodic Oxidation of ZL101A Aluminium Alloy for Electrical Connector with Mixed Acid and Corrosion Resistance of Oxidation Film[J].Plating & Finishing,2021,(2):31.[doi:10.3969/j.issn.1001-3849.2021.10.006]
[7]黄允芳*,蔡锡昌.二次电解着色法防紫铜色铝型材褪色工艺[J].电镀与精饰,2021,(10):55.[doi:10.3969/j.issn.1001-3849.2021.10.011]
　HUANG Yunfang*,CAI Xichang.Process of the Seconday Electrolytic Coloring Method to Prevent Copper Color Discoloration on Al Profile[J].Plating & Finishing,2021,(2):55.[doi:10.3969/j.issn.1001-3849.2021.10.011]
[8]黄允芳*,蔡锡昌,蒋利民.恒压与恒流两种铝阳极氧化控制方法的比较[J].电镀与精饰,2022,(2):12.[doi:10.3969/j.issn.1001-3849.2022.02.003]
　HUANG Yunfang *,CAI Xichang ?JIANG Limin.Comparison of Two Kinds Control Method of the Constant Voltage and Constant Current for Aluminum Anodizing[J].Plating & Finishing,2022,(2):12.[doi:10.3969/j.issn.1001-3849.2022.02.003]
[9]孙文明*,闫晟煜.阳极氧化和封孔处理改善铝合金表面性能的研究[J].电镀与精饰,2022,(4):20.[doi:10.3969/j.issn.1001-3849.2022.04.005]
　SUN Wenming *,YAN Shengyu.Study on Improvement of Surface Properties of Aluminum Alloy by Anodic Oxidation and Sealing Treatment[J].Plating & Finishing,2022,(2):20.[doi:10.3969/j.issn.1001-3849.2022.04.005]
[10]张华云*,任卫斌,刘治国. 7A04CS板材阳极氧化表面局部发黑分析及解决措施 [J].电镀与精饰,2022,(7):70.[doi:10.3969/j.issn.1001-3849.2022.07.012]
　ZHANG Huayun*,REN Weibin,LIU Zhiguo.Analysis of Local Nigrescence on Anodic Oxide Film Surface of 7A04CS Plate[J].Plating & Finishing,2022,(2):70.[doi:10.3969/j.issn.1001-3849.2022.07.012]

备注/Memo

备注/Memo:
收稿日期： 2022-02-07 修回日期： 2022-03-03 * 通信作者： 凌付平（ 1983 —），男，硕士，高级实验师，高级工程师， email ： teacher_ling88@126.com 基金项目： 南通市科技计划项目（ MSZ21011 ）?/html>
更新日期/Last Update: 2023-02-08