[1]安 邦*,李禹辰,卢广轩.doi: 10.3969/j.issn.1001-3849.2025.07.0010钛双极板复合涂层的制备工艺优化研究[J].电镀与精饰,2025,(07):59-63.
　An Bang*,Li Yuchen,Lu Guangxuan.Optimization of preparation process of composite coating on titanium bipolar plates[J].Plating & Finishing,2025,(07):59-63.
点击复制

doi: 10.3969/j.issn.1001-3849.2025.07.0010钛双极板复合涂层的制备工艺优化研究()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2025年07
页码:
59-63
栏目:
出版日期:
2025-07-31

文章信息/Info

Title:
Optimization of preparation process of composite coating on titanium bipolar plates
作者:
安 邦*; 李禹辰; 卢广轩
(西部金属材料股份有限公司,陕西 西安 710201)
Author(s):
An Bang*;  Li Yuchen;  Lu Guangxuan
(Western Metal Materials Co., Ltd., Xian 710201, China)
关键词:
燃料电池; 复合涂层; 工艺优化
Keywords:
fuel cell;  composite coating;  process optimization
分类号:
TG147
文献标志码:
A
摘要:
钛具有密度低、高强度、优异的耐腐蚀性和良好的导电导热性等特点，成为质子交换膜燃料电池双极板主要的候选材料之一。利用磁控溅射沉积和等离子体增强化学气相沉积工艺在钛双极板表面制备了不同厚度的TiN-C复合涂层，并对其进行微观结构表征和耐腐蚀、耐久性能测试。研究结果表明：TiN-C复合涂层的耐腐蚀性能和耐久性能优异，且短期工况下不同TiN-C复合涂层的耐腐蚀性能接近；而长期耐久性测试表明，2500TiN-C复合涂层的接触电阻增加最为缓慢，耐久性能最佳。
Abstract:
Titanium is a leading contender for bipolar plates in proton exchange membrane fuel cells, offering a number of advantageous properties. These include a low density, high strength, excellent corrosion resistance and good thermal conductivity. In this study, TiN-C composite coatings of varying thicknesses were fabricated on titanium bipolar plates via a dual-layer deposition process involving magnetron sputtering and plasma-enhanced chemical vapor deposition (PECVD). The resulting coatings were subjected to microstructural characterization, corrosion resistance, and durability testing. The findings indicate that the TiN-C composite coatings exhibit exceptional corrosion resistance and durability. Furthermore, the corrosion resistance under short-term working conditions is comparable. The durability test demonstrates that the contact resistance of the 2500TiN-C composite coating increases at the slowest rate, and thus exhibits the best durability

参考文献/References:

[1].邵志刚, 衣宝廉. 氢能与燃料电池发展现状及展望 [J]. 中国科学院院刊, 2019, 34(4): 469-477.
[2].赵永志, 蒙波, 陈霖新, 等. 氢能源的利用现状分析 [J]. 化工进展, 2015, 34(9): 3248-3255.
[3].王艳辉, 吴迪镛, 迟建. 氢能及制氢的应用技术现状及发展趋势 [J]. 化工进展, 2001(1): 6-8.
[4].Wu S, Yang W, Yan H, et al. A review of modified metal bipolar plates for proton exchange membrane fuel cells [J]. International Journal of Hydrogen Energy, 2021, 46(12): 8672-8701.
[5].Liu R, Jia Q, Zhang B, et al. Protective coatings for metal bipolar plates of fuel cells: A review [J]. International Journal of Hydrogen Energy, 2022, 47(54): 22915-22937.
[6].任学佑. 质子交换膜燃料电池的进展与前景 [J]. 电池, 2003(6): 395-397.
[7].Xu Z, Qiu D, Yi P, et al. Towards mass applications: A review on the challenges and developments in metallic bipolar plates for PEMFC [J]. Progress in Natural Science: Materials International, 2020, 30(6): 815-824.
[8].Sun W, Lv Y, Gao J, et al. Highly conductive and corrosion-resistant NbN coatings on Ti bipolar plate for proton exchange membrane water electrolysis [J]. Journal of Materials Science & Technology, 2025, 210: 86-96.
[9].梁剑莹, 李永亮, 沈培康. PEMFC关键组件的研究进展[J]. 电池, 2006(3): 226-228.
[10].Asri N F, Husaini T, Sulong A B, et al. Coating of stainless steel and titanium bipolar plates for anticorrosion in PEMFC: A review [J]. International Journal of Hydrogen Energy, 2017, 42(14): 9135-9148.
[11].Pozio A, Zaza F, Masci A, et al. Bipolar plate materials for PEMFCs: A conductivity and stability study [J]. Journal of Power Sources, 2008, 179(2): 631-639.
[12].李俊超, 王清, 蒋锐, 等. 质子交换膜燃料电池双极板材料研究进展 [J]. 材料导报, 2018, 32(15): 2584-2595.
[13].张海峰, 衣宝廉, 侯明, 等. 质子交换膜燃料电池双极板的材料与制备 [J]. 电源技术, 2003(2): 129-133.
[14].张锦园, 张菁丽, 白忠波, 等. 电解铜箔用钛阳极涂层的研究现状 [J]. 电镀与精饰, 2023, 45(12): 95-102.
[15].黄乃宝, 侯明, 明平文, 等. PEMFC薄层金属双极板研究进展 [J]. 化学进展, 2005(6): 17-23.
[16].Yasin M C, Johar M, Gupta A, et al. A comprehensive review of the material innovations and corrosion mitigation strategies for PEMWE bipolar plates [J]. International Journal of Hydrogen Energy, 2024, 88: 726-747.
[17].杨金梦, 柳小祥, 毕俊, 等. 不锈钢双极板耐腐蚀涂层制备及性能 [J]. 电镀与精饰, 2021, 43(10): 8-13.
[18].Li T, Yan Z, Liu Z, et al. Surface microstructure and performance of TiN monolayer film on titanium bipolar plate for PEMFC [J]. International Journal of Hydrogen Energy, 2021, 46(61): 31382-31390.
[19].Bi F, Hou K, Yi P, et al. Mechanisms of growth, properties and degradation of amorphous carbon films by closed field unbalanced magnetron sputtering on stainless steel bipolar plates for PEMFCs [J]. Applied Surface Science, 2017, 422: 921-931.
[20].Silva F C, Prada Ramirez O M, Sagás J C, et al. High-performance titanium nitride structural coatings for corrosion protection of aluminum-based proton exchange membrane fuel cells [J]. ACS Materials Letters, 2024, 6(10): 4564-4570.
[21].黄选民, 侯廷红, 幸泽宽. 氮化钛涂层及其复合涂层的研究进展 [J]. 电镀与精饰, 2009, 31(2): 12-15.

相似文献/References:

[1]杨林*,李文兵,赵雪飞.反应气体流量对机械传动轴表面涂层与性能的影响[J].电镀与精饰,2022,(12):32.[doi:10.3969/j.issn.1001-3849.2022.12.005]
　YANG Lin*,LI Wenbing,ZHAO Xuefei.Effect of Reaction Gas Flow on Surface Coating and Properties of Mechanical Transmission Shaft[J].Plating & Finishing,2022,(07):32.[doi:10.3969/j.issn.1001-3849.2022.12.005]
[2]李 敏,张胜健*,曹秋菊.桐油覆膜Ni-Co-SiO2纳米复合涂层的制备及防腐性能研究[J].电镀与精饰,2023,(1):8.[doi:10.3969/j.issn.1001-3849.2023.01.002]
　Li Min,Zhang Shengjian*,Cao Qiuju.Preparation and corrosion resistance of tung oil coated Ni-Co-SiO 2 nanocomposite coatings[J].Plating & Finishing,2023,(07):8.[doi:10.3969/j.issn.1001-3849.2023.01.002]
[3]张帮彦*,董家键,郑世杰,等.复合电沉积陶瓷颗粒增强金属基复合涂层研究进展[J].电镀与精饰,2023,(1):46.[doi:10.3969/j.issn.1001-3849.2023.01.008]
　Zhang Bangyan*,Dong Jiajian,Zheng Shijie,et al.Research progress on the ceramic particle reinforced metal matrix composite coatings prepared by composite electrodeposition[J].Plating & Finishing,2023,(07):46.[doi:10.3969/j.issn.1001-3849.2023.01.008]
[4]陈 可,张 琦,王凯凤,等. 聚酰亚胺复合薄膜性能研究 [J].电镀与精饰,2024,(2):96.[doi:10.3969/j.issn.1001-3849.2024.02.014]
　Chen Ke,Zhang Qi,Wang Kaifeng,et al.Study on the properties of polyimide composite film[J].Plating & Finishing,2024,(07):96.[doi:10.3969/j.issn.1001-3849.2024.02.014]
[5]牟 杨*,田北平,赵学磊.建筑铝合金模板的表面改性与耐蚀耐磨性能研究[J].电镀与精饰,2024,(10):21.
　Mou Yang *,Tian Beiping,Zhao Xuelei.Research on surface modification and corrosion and wear resistance of architectural aluminum alloy template[J].Plating & Finishing,2024,(07):21.
[6]刘建国,金 宁,王 淼,等.碳钢表面电镀锌镍/有机富铝复合涂层的制备与性能[J].电镀与精饰,2024,(10):56.
　Wang Jiwen,Li Qingpeng.Preparation and properties of electroplating zinc-nickel alloy/organic aluminum-rich composite coatings on carbon steel surface Liu Jianguo1*, Jin Ning 2, Wang Miao2, Zhang Bolun2, Han Li2, Han Changzhi3,[J].Plating & Finishing,2024,(07):56.
[7]所彭帮*,龙 金,胡林荣,等.Ni5Al/85Ni-15C复合涂层的性能及应用[J].电镀与精饰,2024,(12):61.
　Suo Pengbang *,Long Jin,Hu Linrong,et al.Performance and application of Ni5Al/85Ni-15C composite coating[J].Plating & Finishing,2024,(07):61.
[8]范宇涵,侯攀超,宋振兴*,等.doi: 10.3969/j.issn.1001-3849.2025.10.016石墨烯/水性环氧树脂复合涂层的耐腐蚀性能研究[J].电镀与精饰,2025,(10):121.
　Jiang Yuxin,Jiang Ge,Hong Lin,et al.Investigation on the corrosion resistance properties of graphene-reinforced waterborne epoxy composite coatings Fan Yuhan1, Hou Panchao1, Song Zhenxing1*, Kuang Hong 2, Wang Liang3,[J].Plating & Finishing,2025,(07):121.
[9]李禹辰*,范瑞君,安 邦,等.doi: 10.3969/j.issn.1001-3849.2025.12.001表面形貌对燃料电池钛双极板碳涂层性能的影响[J].电镀与精饰,2025,(12):1.
　Lu Jinwu,Zhou Genshu.Effects of surface topography on performance of carbon coatings in fuel cell titanium bipolar plates Li Yuchen 1,2* , Fan Ruijun2, An Bang 2, Liu Nanjun2, Lu Guangxuan2,[J].Plating & Finishing,2025,(07):1.

更新日期/Last Update: 2025-07-08