参考文献/References:
[1].樊平成, 李军, 李龙, 等. 电网设备金属部件的腐蚀与防护[J]. 黑龙江电力, 2021, 43(4): 307-311.
[2].党乐, 郭金刚, 崔亚茹, 等. 架空输电线路金具材料研究现状及发展[J]. 电气技术, 2022, 23(4): 1-6.
[3].商利, 李新梅, 路国闯, 等. 特高压输电线路磁场对电力金具材料摩擦磨损的影响[J]. 表面技术, 2024, 53(3): 132-141.
[4].叶中飞, 吕中宾, 炊晓毅, 等. 合金元素V对电力金具用低合金CrMo钢组织和力学性能的影响[J]. 热加工工艺, 2022, 51(10): 134-137.
[5].吕中宾, 刘泽辉, 叶中飞, 等. 回火保温时间对电力金具用低合金铬钼贝氏体钢组织和力学性能的影响[J]. 热加工工艺, 2022, 51(10): 138-140.
[6].吴天博, 王宗江. 架空输电线路金具腐蚀失效分析研究[J]. 电气开关, 2020, 20(1): 69-72.
[7].陈翠, 王瑾, 陈娜娜, 等. 模拟酸雨大气环境镀锌钢的室内加速腐蚀行为和机理[J]. 表面技术, 2023, 52(6): 327-336.
[8].张培军, 李新梅, 杨现臣, 等. 特高压输电线路连接金具腐蚀特性及其产物对磨损行为的影响[J]. 新疆大学学报, 2023, 40(2): 250-256.
[9].裴兵兵, 裴文乐, 王建梅, 等. 人工海水中 Q345 钢的腐蚀磨损行为研究[J]. 润滑与密封, 2024, 44: 1-9.
[10].李冬青, 乔亚霞, 郑树会, 等. 强风沙地区输电线路新型耐磨金具性能研究[J]. 热加工工艺, 2020, 49(14): 51-54.
[11].王松臣. 强风沙环境下电力连接金具磨损行为及模拟研究[D]. 乌鲁木齐:新疆大学, 2021.
[12].王晓辉, 李新梅, 逯平平. 特高压输电线电力金具磨损研究现状[J]. 热加工工艺, 2020, 49(16): 11-14.
[13].鲁震, 钱建国, 叶兵, 等. 钢铁表面有机涂层的耐蚀与摩擦性能的研究进展[J]. 表面技术, 2024, 53(12): 22-35.
[14].陈军君, 胡加瑞, 谢亿, 等. 架空输电线路金具腐蚀分析及防护对策[J]. 电力建设, 2013, 34(8): 95-99.
[15].Anindita C, Rishav G, Munish S, et al. Improvement in hot dip galvanized coating microstructure and properties by pre-metallic deposition on steel surface: A comprehensive review[J]. Surface & Coatings Technology, 2022, 449: 128972.
[16].Emmanuel C, Chika O U, Christian O A, et al. Electropla-ting in the modern era, improvements and challenges: A review[J]. Hybrid Advances, 2024, 7: 100286.
[17].Arulvel S, Dsilva W R, Akshat J, et al. Laser processing techniques for surface property enhancement: Focus on material advancement[J]. Surfaces and Interfaces, 2023, 42: 103293.
[18].Wang Q, Kainuma S, Ju Y, et al. Effect of the spraying process on corrosion resistance and durability of Al-5Mg coating on carbon steel: A comparison of transferred arc plasma spraying and flame spraying methods[J]. Surfaces and Interfaces, 2025, 64(1): 106377.
[19].王欣欣, 赵普志, 魏晌, 等. 42CrMo激光淬火与火焰淬火摩擦学性能对比研究[J]. 应用激光, 2022, 42(4): 105-112.
[20].Yang G, Sshigenobu K, Muye Y, et al. Galvanic corrosion behavior of hot-dip Al and 55Al-Zn coatings applied to steel bolted joints in atmospheric environments[J]. Construction and Building Materials, 2023, 401(19): 132694.
[21].陈军君, 李明, 胡加瑞, 等. 酸雨地区电力金具腐蚀速度模型和寿命评估[J]. 华东电力, 2013, 41(5): 1037-1040.
[22].牛海军, 司佳钧, 朱宽军, 等. 表面处理对金具耐磨特性影响研究[J]. 铸造技术, 2019, 40(2): 225-228.
[23].姚远, 王广军. 金属材料防腐能力改进路径探析[J]. 决策探索(中), 2018, 2: 1-3.
[24].葛云鹏. 稀土和浸镀工艺对热浸镀Zn-10%Al镀层钢丝组织和性能的影响[D]. 南京: 南京航空航天大学, 2022.
[25].刘二勇, 曾志翔, 赵文杰. 海水环境中金属材料腐蚀磨损及耐磨防腐一体化技术的研究进展[J]. 表面技术, 2017, 46(11): 149-157.
[26].王浩, 封正龙. 化学镀研究现状及其应用[J]. 化工技术与开发, 2018, 47(8): 37-10.
[27].Takao G, Yumi U, Hiroki T, et al. Preparation of chemical-resistant atomically ordered Sn-Ni alloy films by electroless plating[J]. Journal of Alloys and Compounds, 2021, 877: 160100.
[28].Wang H, Zhu D, Zhou W, et al. Enhanced microwave absorbing properties and heat resistance of carbonyl iron by electroless plating Co[J]. Journal of Magnetism and Magnetic Materials, 2015, 393: 445-451.
[29].Wang Z, Hu X, Lyu H, et al. Grain boundary decoration by electroless plating Ag enhances the thermoelectric performance of polycrystalline SnSe[J]. Journal of Alloys and Compounds, 2025, 1018: 179125.
[30].Su S, Zang J, Zhou Y, et al. Efficient manufacture of high-performance electroplated diamond wires utilizing Cr-coated diamond micro-powder[J]. Materials Science in Semiconductor Processing, 2024, 179: 108511.
[31].Mir M K A, Hamed S G, Milad R. Evaluation of corrosion protection performance of electroplated zinc and zinc-graphene oxide nanocomposite coatings in air saturated 3.5?wt.% NaCl solution[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2020, 601: 125051.
[32].Zhang X, Xu K. On the evaluation of the adhesion of electroplated Ni coatings upon steel substrate with extended microbridge technique[J]. Materials Science and Engineering: A, 2008, 494(1-2): 122-126.
[33].Wang L, Nam K S, Kwon S C. Effect of plasma nitriding of electroplated chromium coatings on the corrosion protection C45 mild steel[J]. Surface and Coatings Technology, 2007, 202(2): 203-207.
[34].Ping Z, He Y, Gu C, et al. Mechanically assisted electroplating of Ni-P coatings on carbon steel[J]. Surface and Coatings Technology, 2008, 202(24): 6023-6028.
[35].李文峰, 田江波, 李佳, 等. 电力金具表面电沉积Zn-Mn合金镀层及其耐蚀性能研究[J].电镀与精饰, 2024, 46(9): 69-75.
[36].赵军愉, 徐松晓, 柴小亮, 等. 输电线路金具表面电沉积锌?镍?金刚石复合镀层的性能[J]. 电镀与涂饰, 2024, 43(7): 9-15.
[37].Falcon J M, Aoki I V. Electrodeposition of Zn-Co alloy coatings on carbon steel and their corrosion resistance[J]. Surface & Coatings Technology, 2024, 481: 130603..
[38].朱万宇, 黄皓, 史青青, 等. 改善低碳钢镀镍层耐蚀性的方法[J]. 电镀与涂饰, 2020, 39(19): 1319-1321.
[39].晁爽. 42CrMo 钢表面化学镀 Ni-P-SiCP 复合镀层制备工艺及性能研究[D]. 邯郸: 河北工程大学, 2024.
[40].Li Z, Du C. Current status and research trends of electroplating wastewater treatment: Systematic review and bibliometric analysis[J]. Desalination, 2025, 9164(25): 1-46.
[41].Yu X, Hou Y, Ren X, et al. Research progress on the removal, recovery and direct high-value materialization of valuable metal elements in electroplating/electroless plating waste solution[J]. Journal of Water Process Engineering, 2022, 46: 102577.
[42].刘春阁, 邱星武. 激光硬化表面处理技术及其应用现状[J]. 稀有金属与硬质合金, 2012, 40(1): 62-65.
[43].Li Q H, Xiao K, Lu Z Y, et al. Mechanism of laser carboni-triding enhancing the wear resistance of 45 # steel[J]. Ma -terials Today Communications, 2024, 38: 108327.
[44].Abodolahi B, Shahverdi H R, Torkamany M J, et al. Improvement of the corrosion behavior of low carbon steel by laser surface alloying[J]. Applied Surface Science, 2011, 257: 9921-9924.
[45].周海飞, 李凤瑞, 王河, 等. 连接金具用Q235钢表面激光合金化耐磨耐蚀涂层的组织及性能研究[J]. 表面技术, 2024, 53(21): 208-219.
[46].夏传帮, 周震宇, 吴德智, 等. 高强度螺栓激光表面强化工艺及性能研究[J]. 应用激光, 2023, 43(12): 116-123.
[47].王欣欣, 刘阳, 张博, 等. 线路连接金具U型环激光表面耐磨强化研究[J]. 应用激光, 2023, 43(3): 59-67.
[48].Li Q, Xiao K, Lu Z, et al. Mechanism of laser carbonitriding enhancing the wear resistance of 45# steel[J]. Material Today Communications, 2024, 38: 108327.
[49].周雳, 邢志国, 王海斗, 等. 等离子喷涂金属/陶瓷梯度热障涂层研究进展[J]. 表面技术, 2020, 49(1): 122-131.
[50].Gao R, Huang Y, Zhou X, et al. Material system and tribological mechanism of plasma sprayed wear resistant coatings: Overview[J]. Surface and Coatings Technology, 2024, 483: 130758.
[51].Sushree S M, Tapan D, Tapan K P, et al. Improvement of hardness and anti-corrosion behavior of mild steel by plasma sprayed coating of Al2O3/GO composite[J]. Journal of the Indian Chemical Society, 2023, 100(5): 100996.
[52].Zhao Y C, He Y, Zhang J, et al. Effect of high temperature-assisted ultrasonic surface rolling on the friction and wear properties of a plasma sprayed Ni/WC coating on #45 steel substrate[J]. Surface & Coatings Technology, 2023, 452: 129049.
[53].田鹏宇. Q235钢表面耐磨耐蚀涂层制备与性能研究[D]. 常州: 常州大学, 2022.
[54].Amudha A, Nagaraja H S, Shashikala H D. Plasma-sprayed graphene oxide reinforced alumina composite coatings on low carbon steel with improved fracture toughness, brittleness index, and microhardness[J]. Material Today Proceedings, 2021, 39(4): 1503-1508.
[55].Liu H, Tang J, Liu C, et al. Understanding the distinction between quenching and carburizing quenching stress field: Evolution mechanism of quenching stress field influenced by carbon content in low-carbon alloy steel[J]. Surface and Coatings Technology, 2024, 489: 131112.
[56].闫卓. 不同材料渗氮层硬度测试载荷的选择研究[J]. 热处理技术与装置, 2023, 44(3): 48-61.
[57].Wang X N, Chen K, Li Q D, et al. Effect of novel carburizing-carbonitriding heat treatment on the microstru-cture, surface hardness, and wear resistance of 18Cr2Ni4WA steel[J]. Materials Today Communications, 2025, 46: 112610.
[58].Kusmanov S A, Smimov A A, Silkin S A, et al. Increasing wear and corrosion resistance of low-alloy steel by anode plasma electrolytic nitriding[J]. Surface & Coatings Tech-nology, 2016, 307: 1350-1356.
[59].Dong Y, Cui X, Li J, et al. Effect of carburizing nitriding compound treatment on microstructure evolution and properties of low carbon gear steel[J]. Materials Chemistry and Physics, 2025, 337: 130489.
[60].Zhu K, Zhu X, Xu R, et al. Effect of rapid heat treatment on mechanical properties and precipitation behavior of medium carbon low alloy steel[J]. Journal of Materials Research and Technology, 2025, 35: 5730-5745.
[61].Sun X H, Zhao Y H, Ye C C, et al. The effect of AlCrN, TiN and Ni-Cr-Nb coatings on the wear and corrosion performance of 45# steel in 3.5 % sodium chloride solution[J]. International Journal of Electrochemical Science, 2024, 19: 100608.
[62].Celik H, Kovaci H. Combined effects of magnetic field and surface treatments consisting of shot peening, plasma nitriding and their consecutive application on the friction and wear behavior of a ferromagnetic steel[J]. Materials Today Communications, 2023, 37: 107467.
[63].王彬, 周茜, 高川力, 等. 低碳钢液相等离子体电解B+C+N共渗层的摩擦电化学行为[J]. 表面技术, 2023, 52(6): 80-87.
[64].李会芬, 邹忠利, 李春龙. 镀锌层表面无铬钝化工艺的研究进展[J]. 材料保护, 2021, 54(3): 137-144.
[65].周凯利. 金属绿色表面处理废水中重金属分析[J]. 皮革制作与环保科技, 2022, 26: 98-102.