[1]杨 亭*,龙 汉,张云云,等.doi: 10.3969/j.issn.1001-3849.2025.12.015电沉积参数对Ni-Co-P复合电镀层性能的影响[J].电镀与精饰,2025,(12):117-123.
　Cheng Junyi,Wang Guangyin.Influence of electrodeposition parameters on the properties of Ni-Co-P composite electroplating coatings Yang Ting1*, Long Han2, Zhang Yunyun1, Cheng Shangsheng1,[J].Plating & Finishing,2025,(12):117-123.
点击复制

doi: 10.3969/j.issn.1001-3849.2025.12.015电沉积参数对Ni-Co-P复合电镀层性能的影响()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2025年12
页码:
117-123
栏目:
出版日期:
2025-12-31

文章信息/Info

Title:
Influence of electrodeposition parameters on the properties of Ni-Co-P composite electroplating coatings Yang Ting1*, Long Han2, Zhang Yunyun1, Cheng Shangsheng1,
作者:
杨 亭1*; 龙 汉2; 张云云1; 陈尚升1; 陈俊艺1; 王广银3
(1. 广东开放大学 机电工程学院,广东 广州 510091 ;2. 国防科技大学 理学院,湖南 长沙 410003 ;3. 陆装驻北京地区第五军代室,北京 100005)
Author(s):
Cheng Junyi1;  Wang Guangyin3
(1. School of Mechanical and Electrical Engineering, Guangdong Open University, Guangzhou 510091, China; 2. College of Science, National University of Defense Technology, Changsha 410003, China; 3. The Fifth Military Representative Office of the Land Force Stationed in the Beijing Area, Beijing 100005, China)
关键词:
电沉积参数; 电镀液; 镀层性能
Keywords:
electrodeposition parameters;  electroplating solution;  layer plating performance
分类号:
TQ51.66
文献标志码:
A
摘要:
为深入探究电沉积参数与Ni-Co-P复合电镀层性能之间的关联，本研究选取电流密度、镀液成分、温度等电沉积参数作为研究对象，采用系统实验与理论分析相结合的方法，研究电沉积参数对Ni-Co-P复合电镀层显微硬度、耐腐蚀性及耐磨性的影响。测试结果表明：在电流密度为5 A·dm?2、电镀温度为140 ℃、电镀时间为30min的条件下，镀层的显微硬度达到更优；在电流密度为5 A·dm?2、电镀温度为100 ℃、电镀时间为40 min的条件下，镀层的耐腐蚀性表现更佳；当电流密度为6.6 A·dm?2、电镀温度为116 ℃、电镀时间为33 min时，镀层的耐磨性最为优异。
Abstract:
To investigate the correlation between electrodeposition parameters and the properties of Ni-Co-P composite electroplating coatings, this study selected electrodeposition parameters such as current density, plating solution composition, and temperature as research objects. A combination of systematic experiments and theoretical analysis was used to study the effects of electrodeposition parameters on the microhardness, corrosion resistance, and wear resistance of Ni-Co-P composite electroplating coatings. The test results show that under the conditions of a current density of 5 A·dm -2, an electroplating temperature of 140 ℃, and an electroplating time of 30 minutes, the microhardness of the coating reaches a better level. Under the conditions of a current density of 5 A·dm-2, electroplating temperature of 100 ℃, and electroplating time of 40 minutes, the corrosion resistance of the coating is better. When the current density is 6.6 A·dm-2, plating temperature is 116 ℃, and plating time is 33 min, the coating exhibits optimal wear resistance.

参考文献/References:

[1].丁耀, 沈岳军, 付定国, 等. 热处理温度对电镀Ni-Co-P镀层的性能影响[J]. 电镀与精饰, 2024, 46 (8): 25-29.
[2].高昌琦, 马勤, 魏玉鹏, 等. Ni-Co-P中间层优化玄武岩纤维增强铝基复合材料的界面结构和力学性能[J]. 稀有金属材料与工程, 2023, 52 (12): 4013-4020.
[3].杨悦澜, 何湘柱, 袁惠彬, 等. Ni–P合金和Ni–Co–P合金电沉积工艺优化及其性能[J]. 电镀与涂饰, 2023, 42 (13): 18-24.
[4].王国峰, 刘永康, 刘青, 等, 王月林. Ni-Co纳米镀层为中间层的TC4钛合金低温扩散连接[J]. 锻压技术, 2022, 47 (11): 239-245.
[5].张璐, 余云丹, 卫国英. 电流密度对电沉积钴-铁-二氧化锆复合镀层性能的影响[J]. 电镀与涂饰, 2023, 42(9): 1-6.
[6].赵显蒙, 李长青, 鞠辉, 等. 不同因素对电沉积镍-钨合金镀层性能的影响[J]. 电镀与涂饰, 2023, 42(5): 14-18.
[7].马春阳, 何泓鑫, 夏法锋, 等. 超声波辅助射流电沉积Ni-W-Al2O3纳米复合镀层工艺参数优化及性能研究[J]. 东北农业大学学报, 2024, 55(7): 93-102.
[8].卢帅, 孙晓伟, 薛伟, 等. 沉积参数对阴极等离子电解沉积Ni涂层的影响[J]. 稀有金属, 2024, 48(6): 761-773.
[9].李子豪, 彭文海, 王艳虎, 等. 射流电沉积流场变化对铜沉积层的影响[J]. 表面技术, 2024, 53(14): 207-215.
[10].刘涛, 贾卫平, 吴蒙华, 等. 工艺参数对定间距电沉积微镍柱表面形貌的影响[J]. 工具技术, 2023, 57(3): 39-44.
[11].薛建超, 贾波, 王亚菲, 等. 阴极等离子电解沉积制备Al2O3-Ru复合涂层的机理与性能[J]. 稀有金属材料与工程, 2024, 53(12): 3306-3312.
[12].余本潮, 李维, 刘星, 等. 电沉积法制备FeNiCo片状粒子及其涡流抑制和磁导率增强[J]. 包装工程, 2024, 45(23): 110-119.
[13].李宏亮, 刘胜达, 崔孟超, 等. 电沉积电位对镍钴合金超疏水镀层耐蚀性的影响[J]. 功能材料, 2024, 55(11): 11158-11163.
[14].段淑茹, 朱开金, 孙心, 等. 电沉积法制备Ce-Ps-LaCoO3/Al2O3及臭氧催化降解焦化废水尾水的研究[J]. 现代化工, 2024, 44(11): 148-152, 158.
[15].李岳, 闵洛夫, 张文, 等. 电沉积制备高活性高稳定性镍铁合金析氧电极[J]. 化学工业与工程, 2024, 41(5): 51-60.
[16].何萌, 贾淑果, 朱倩倩, 等. 阴极钛材表面处理工艺对其表面状态及铜离子电沉积初期行为的影响[J]. 精密成形工程, 2024, 16(9): 56-64.
[17].杨西荣, 楚小晴, 李兆. 电解液温度和pH值对铜电沉积行为及性能的影响[J]. 稀有金属材料与工程, 2024, 53(6): 1685-1692.
[18].孙诗成, 张朝阳, 吴予澄, 等. 激光电沉积复合制备定域微纳结构及其超疏水性能研究[J]. 表面技术, 2024, 53(13): 64-74,95.
[19].陈志翔, 赵远涛, 田冉, 等. 不同电流密度下电沉积金刚石增强镍基复合涂层的微观结构与耐磨性能[J]. 机械工程材料, 2024, 48(5): 90-96.

相似文献/References:

[1]刘明昊,孙玉凤,任春宇,等.碱性锌镍电镀液主要成分的快速在线分析[J].电镀与精饰,2019,(1):27.[doi:10.3969/j.issn.1001-3849.2019.01.006]
　LIU Minghao,SUN Yufeng,REN Chunyu,et al.Rapid Online Analysis of Main Components of Alkaline Zinc?Nickel Alloy Electroplating Solution[J].Plating & Finishing,2019,(12):27.[doi:10.3969/j.issn.1001-3849.2019.01.006]
[2]吴 煜,王春霞,唐方宇,等.荧光光谱法测定镀铜溶液主盐含量的误差分析[J].电镀与精饰,2024,(12):120.
　Wu Yu,Tian Jihong*,Tang Fangyu,et al.Error analysis of measurements of main salt content in copper electroplate baths by fluorescence spectrometry[J].Plating & Finishing,2024,(12):120.
[3]张德良,朱 林*,郑浩帅,等.doi: 10.3969/j.issn.1001-3849.2025.03.010粗化预电镀引线框架的可靠性研究[J].电镀与精饰,2025,(03):67.
　Zhang Deliang,Zhu Lin*,Zheng Haoshuai,et al.Research on the reliability of roughen pre-electroplated lead frame[J].Plating & Finishing,2025,(12):67.
[4]张宇彤*,熊强强.doi: 10.3969/j.issn.1001-3849.2025.11.006不同电沉积参数下Ni-P-MoS2合金装饰镀层的性能研究[J].电镀与精饰,2025,(11):47.
　Zhang Yutong*,Xiong Qiangqiang.Properties of decorative coatings of Ni-P-MoS2 alloy under different electrodeposition parameters[J].Plating & Finishing,2025,(12):47.

更新日期/Last Update: 2025-12-18