JIAO Chengdong,LI Bin.Influence of Roughness on the Conductivity of Silver Coating[J].Plating & Finishing,2018,(12):16-18.[doi:10.3969/j.issn.1001?3849.2018.12.004]
粗糙度对镀银层导电性能的影响
- Title:
- Influence of Roughness on the Conductivity of Silver Coating
- Keywords:
- silvering; roughness; conductivity
- 分类号:
- TQ127.1
- 文献标志码:
- A
- 摘要:
- 本文对粗糙度不同的2A12铝合金试样及零部件进行表面镀银,并研究了镀银层的导电性能。结果表明,当粗糙度Ra较小介于0.8~1.6 μm之间时,其对镀银层的导电性能影响较小;当零部件粗糙度Ra较大介于3.2~6.3 μm之间时,镀银层的导电性能明显变差。
- Abstract:
- In this paper, the samples and parts with different roughness of 2A12 aluminium alloy were plated with silver, and the conductivities of the coatings were tested. The results showed that the influence of the roughness on the conductivity of the coating was little when the roughness Ra was between 0.8 μm and 1.6 μm. However, the conductivity of the silver coating became smaller when the roughness Ra became larger, between 3.2 μm and 6.3 μm.
参考文献/References:
[1] 胡星福,高华云,毛江宏. 触头表面粗糙度对接触电阻影响讨论[J]. 电工材料,2004,(1):14-16.
[2] 赵建伟. 温度和电流密度对无氰镀银层微观形貌的影响[J]. 电镀与精饰,2014,(7):12-15,19.
[3] 邱媛,王春霞,于宽深,等. 黄铜基材无氰镀银预处理浸银工艺的优化[J]. 电镀与精饰,2015,37(3):20-23.
[4] 许军, 李坤. 电接触的接触电阻研究[J]. 电工材料, 2011,(1):10-12.
[5] 柏小平,李国伟,翁桅,等. 电触头表面状态对接触电阻的影响和改善方法[J]. 电工材料,2013,(1):10-15.
相似文献/References:
[1]王晓丽,顾 海,周昭昌,等.铜镀层工艺参数优化的正交实验研究[J].电镀与精饰,2018,(12):19.[doi:10.3969/j.issn.1001?3849.2018.12.005]
WANG Xiaoli,GU Hai,ZHOU Zhaochang,et al.Orthogonal Experimental Research on Optimization of Process Parameters of Copper Electroplating[J].Plating & Finishing,2018,(12):19.[doi:10.3969/j.issn.1001?3849.2018.12.005]
[2]王帅东*,张昕宇,赵武军,等.2195铝锂合金碱性化学铣切工艺探究[J].电镀与精饰,2020,(1):33.[doi:10.3969/j.issn.1001-3849.2020.01.007]
WANG Shuaidong*,ZHANG Xinyu,ZHAO Wujun,et al.Study on the Alkaline Milling Process of 2195 Al-Li Alloy[J].Plating & Finishing,2020,(12):33.[doi:10.3969/j.issn.1001-3849.2020.01.007]
[3]宋振兴,张理操,李岱原,等.3D打印高温合金异形内通道化学抛光液性能研究[J].电镀与精饰,2020,(4):23.[doi:10.3969/j.issn.1001-3849.2020.04.0050]
SONG Zhenxing,ZHANG Licao,LI Daiyuan,et al.Study on the Performance of Chemical Polishing Fluid in Inner Channel of 3D Printing High Temperature Alloy[J].Plating & Finishing,2020,(12):23.[doi:10.3969/j.issn.1001-3849.2020.04.0050]
[4]王朝琳*,宋斌,刘娟,等.直升机桨叶包片胶接前激光毛化处理的有效性研究[J].电镀与精饰,2021,(12):29.[doi:10.3969/j.issn.1001-3849.2021.12.006]
WANG Chaolin*,SONG Bin,LIU Juan,et al.The Effectiveness of Laser Texturing Technology in Surface Treatment of the Bonding Quality of Helicopter Slurry Pack[J].Plating & Finishing,2021,(12):29.[doi:10.3969/j.issn.1001-3849.2021.12.006]
[5]杨 岭,潘应君*,郑世恩,等.石墨表面磁控溅射钛膜的结构与工艺参数研究[J].电镀与精饰,2023,(3):11.[doi:10.3969/j.issn.1001-3849.2023.03.002]
Yang Ling,Pan Yingjun*,Zheng Shien,et al.Structure and process parameters of titanium films prepared by magnetron sputtering on graphite[J].Plating & Finishing,2023,(12):11.[doi:10.3969/j.issn.1001-3849.2023.03.002]
[6]张 莉,赵 超,庞志伟,等.ZnO对2219铝合金在氢氧化钠溶液中化铣行为的影响[J].电镀与精饰,2023,(8):7.[doi:10.3969/j.issn.1001-3849.2023.08.002]
Zhang Li,Zhao Chao,Pang Zhiwei,et al.Influence of ZnO on the chemical milling behavior of 2219 aluminum alloy in sodium hydroxide solution?/html>[J].Plating & Finishing,2023,(12):7.[doi:10.3969/j.issn.1001-3849.2023.08.002]
[7]彭雪嵩,由宏伟,李兰晨,等.粗化工艺对电解铜箔抗剥离强度和劣化率的影响[J].电镀与精饰,2024,(3):95.[doi:10.3969/j.issn.1001-3849.2024.03.014]
Peng Xuesong,You Hongwei,Li Lanchen,et al.The influence of coarsening process on the anti-peeling strength and degradation rate of electrolytic copper foil?/html>[J].Plating & Finishing,2024,(12):95.[doi:10.3969/j.issn.1001-3849.2024.03.014]
[8]陈婧*.厚度与粗糙度对紫铜镀银层温升的影响[J].电镀与精饰,2022,(8):19.[doi:10.3969/j.issn.1001-3849.2022.08.004]
CHEN Jing *.Influence of Thickness and Roughness on Temperature Rise of Silver Plated Pure Copper Materials[J].Plating & Finishing,2022,(12):19.[doi:10.3969/j.issn.1001-3849.2022.08.004]
备注/Memo
收稿日期: 2018-04-23
修回日期: 2018-08-20