PDF下载 分享
[1]王 秀.电镀智能监控系统设计[J].电镀与精饰,2018,(12):30-32.[doi:10.3969/j.issn.1001?3849.2018.12.007]
　WANG Xiu.Design of Intelligent Electroplating Monitoring System[J].Plating & Finishing,2018,(12):30-32.[doi:10.3969/j.issn.1001?3849.2018.12.007]
点击复制

电镀智能监控系统设计

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG] 卷: 期数: 2018年12 页码: 30-32 栏目: 出版日期: 2019-06-06
Title:
Design of Intelligent Electroplating Monitoring System
作者:
王 秀
菏泽学院 机电工程学院，山东 菏泽 274000
Author(s):
WANG Xiu
College of Mechanical and Electrical Engineering, Heze University, Heze 274000, China
关键词:
电镀; PLC; 变频器; 梯形图
Keywords:
electroplating;  programmable logic controller;  frequency converter;  ladder diagram
分类号:
TQ153
DOI:
10.3969/j.issn.1001?3849.2018.12.007
文献标志码:
B
摘要:
传统的电镀生产线劳动强度大、可靠性差，文中提出了用PLC结合变频器、组态软件WINCC的智能电镀监控系统。该系统不仅能自动完成电镀的各工序，而且能在不同地点对PLC的输入输出同步管理，满足了监控的实时性，提高了电镀系统的自动化水平，生产效率，带来了良好的社会效益和经济效益。
Abstract:
The traditional electroplating production line has high labor intensity and poor reliability. The intelligent electroplating monitoring system was proposed in the paper, which was applied with the technology of PLC, integrating the frequency converter and the configuration software WINCC. The electroplating intelligent monitoring system not only can finish all the electroplating processes automatically, but also can manage the inputs and outputs of PLC synchronously in the different places. So it meets the requirement of real-time monitoring, improves the automation level and production efficiency of electroplating system, and brings good social and economic benefits.

参考文献/References:

［1］ 赵国华. PLC控制系统在电镀生产中的应用[J]. 电镀与环保， 2014， 34（6）： 4-5.
［2］ 袁忠. 基于可编程逻辑控制器的电镀工艺参数自动化监控[J]. 电镀与环保， 2014， 34（5）： 6.
［3］ 刘远娟. PLC与变频器在电镀生产线控制系统改造中的应用[J]. 机械工程与自动化， 2015， （3）： 179-181.
［4］ 赵晓初. PLC变频控制的多液体混合控制系统[J]. 军民两用技术与产品， 2015， （2）： 53.
［5］ 刘颜良， 李夏， 付海涛. 基于西门子PLC和MM440变频器的多段速控制方法应用[J]. 电工技术， 2011， （8）： 47.
［6］ 邓鹰飞. 基于S7300PLC的电镀行车远程监控系统设计[J]. 计算机与数字工程， 2017， 45（4）： 788-790.

相似文献/References:

[1]王晓丽,顾 海,周昭昌,等.铜镀层工艺参数优化的正交实验研究[J].电镀与精饰,2018,(12):19.[doi:10.3969/j.issn.1001?3849.2018.12.005]
　WANG Xiaoli,GU Hai,ZHOU Zhaochang,et al.Orthogonal Experimental Research on Optimization of Process Parameters of Copper Electroplating[J].Plating & Finishing,2018,(12):19.[doi:10.3969/j.issn.1001?3849.2018.12.005]
[2]王明亮,杨海燕,李 明,等.电镀硬金的研究现状[J].电镀与精饰,2019,(11):26.[doi:10.3969/j.issn.1001-3849.2019.11.007]
　WANG Mingliang,YANG Haiyan,LI Ming,et al.Research Progress on Hard Gold Electrodeposition[J].Plating & Finishing,2019,(12):26.[doi:10.3969/j.issn.1001-3849.2019.11.007]
[3]宋青员,何荣祥,陈朝会,等.高度梯度微纳结构的自动化电镀制备方法[J].电镀与精饰,2020,(7):23.[doi:10.3969/j.issn.1001-3849.2020.07.0050]
　SONG Qingyuan,HE Rongxiang,CHEN Chaohui,et al.Automated Electroplating for Gradient Height Micro-nano Structures Fabricating[J].Plating & Finishing,2020,(12):23.[doi:10.3969/j.issn.1001-3849.2020.07.0050]
[4]雷翔霄?,徐立娟,唐春霞.基于神经网络PID算法的镀液温度控制系统[J].电镀与精饰,2020,(8):39.[doi:10.3969/j.issn.1001-3849.2020.08.0080]
　LEI Xiangxiao,XU Lijuan,et al.Bath Temperature Control System Based on Neural Network PID[J].Plating & Finishing,2020,(12):39.[doi:10.3969/j.issn.1001-3849.2020.08.0080]
[5]范文俊,崔红兵,王 萌,等.从三价铬溶液电沉积非晶Cr-C镀层及其性能研究[J].电镀与精饰,2020,(12):37.[doi:10.3969/j.issn.1001-3849.2020.12.0080]
　FAN Wenjun,CUI Hongbing,WANG Meng,et al.Preparation and Performance Study of Amorphous Cr-C Coating Electrodeposited from Trivalent Chromium Solution[J].Plating & Finishing,2020,(12):37.[doi:10.3969/j.issn.1001-3849.2020.12.0080]
[6]薛迪杰*,陈 军,陈景召.基于ZigBee的电镀生产线温度集中监控系统[J].电镀与精饰,2021,(1):31.[doi:10.3969/j.issn.1001-3849.2021.01.0060]
　XUE Dijie*,CHEN Jun,CHEN Jingzhao,et al.Temperature Centralized Monitoring System of Electroplating Production Line Based on ZigBee[J].Plating & Finishing,2021,(12):31.[doi:10.3969/j.issn.1001-3849.2021.01.0060]
[7]王昱开*.不锈钢工具电镀金刚石工艺研究[J].电镀与精饰,2021,(3):6.[doi:10.3969/j.issn.1001-3849.2021.03.002]
　WANG Yukai*.王昱开*[J].Plating & Finishing,2021,(12):6.[doi:10.3969/j.issn.1001-3849.2021.03.002]
[8]杨航城,田海燕.工艺参数对电镀镍钴合金及其性能的影响[J].电镀与精饰,2021,(4):5.[doi:10.3969/j.issn.1001-3849.2021.04.002]
　YANG Hangcheng,TIAN Haiyan.Effect of Process Parameters on Electrodepositing Ni-Co Alloy and Its Properties[J].Plating & Finishing,2021,(12):5.[doi:10.3969/j.issn.1001-3849.2021.04.002]
[9]孙小平*,吕春雷.薄带连铸结晶辊表面处理[J].电镀与精饰,2021,(5):43.[doi:10.3969/j.issn.1001-3849.2021.05.007]
　SUN Xiaoping*,LV Chunlei.Surface Treatment Technology of Crystallization Roller for Strip Continuous Casting[J].Plating & Finishing,2021,(12):43.[doi:10.3969/j.issn.1001-3849.2021.05.007]
[10]雷翔霄,唐春霞.基于自适应模糊PID算法的镀液温度控制[J].电镀与精饰,2021,(8):35.[doi:10.3969/j.issn.1001-3849.2021.08.008]
　LEI Xiangxiao,TANG Chunxia.Bath Temperature Control System Based on Adaptive Fuzzy PID[J].Plating & Finishing,2021,(12):35.[doi:10.3969/j.issn.1001-3849.2021.08.008]
[11]刘 光*,文 桦,徐启杰.基于TIA和PLC的全自动ABS塑料电镀控制系统设计[J].电镀与精饰,2020,(2):33.[doi:10.3969/j.issn.1001-3849.2020.02.007]
　LIU Guang*,WEN Hua,XU Qijie.Design of Automatic Control System for ABS Plastics Electroplating Line Based on TIA and PLC[J].Plating & Finishing,2020,(12):33.[doi:10.3969/j.issn.1001-3849.2020.02.007]

备注/Memo

收稿日期： 2018-07-11
修回日期： 2018-07-25
基金项目： 菏泽学院基金项目:基于学生自主学习能力培养的机器人课程创新研究与实践（2018224）；山东省科技计划项目（J17KA026）

更新日期/Last Update: 2018-12-31