PDF下载 分享
[1]黄允芳*,蔡锡昌.铝型材电解着色工艺向环保型工艺转换的研究[J].电镀与精饰,2019,(12):10-13.[doi:10.3969/j.issn.1001-3849.2019.12.003]
　HUANG Yunfang*,CAI Xichang.Studies on Environmentally Friendly Technology Transformation of Electrolytic Coloring for Al Profile[J].Plating & Finishing,2019,(12):10-13.[doi:10.3969/j.issn.1001-3849.2019.12.003]
点击复制

铝型材电解着色工艺向环保型工艺转换的研究

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG] 卷: 期数: 2019年12 页码: 10-13 栏目: 出版日期: 2019-12-15
Title:
Studies on Environmentally Friendly Technology Transformation of Electrolytic Coloring for Al Profile
作者:
黄允芳1*; 蔡锡昌2
1.江苏商贸职业学院，江苏 南通 226011； 2.精细化学品集团有限公司，浙江 台州318020
Author(s):
HUANG Yunfang1*;  CAI Xichang2
1.Jiangsu Vocational College of Business，Nantong 226011，China;2.Fine Chemicals Group Ltd., Taizhou 318020，China
关键词:
铝型材; 阳极氧化; 电解着色
Keywords:
aluminum profile;  anodizing;  electrolytic coloring
DOI:
10.3969/j.issn.1001-3849.2019.12.003
文献标志码:
A
摘要:
铝型材阳极氧化表面处理对环保影响很大，实现表面处理工艺向环保型工艺转换是必然趋势。针对国内众多铝型材企业在Sn-Ni混合盐常用电解着色工艺向环保型Sn盐工艺转换过程中，遇到与原色调存在差异、颜色分布能力较差和条带型分色缺陷明显等问题，根据实验室试验与生产实践经验，分析了问题的根源，并提出了相应的解决办法。
Abstract:
The anodizing surface treatment of the Al profile has a great influence on the environment. Transformation to environmentally friendly technology is an inevitable trend. Several problems of the color difference, poor dispersion ability and obvious color separation defect are encountered during Al profile in the course of transformation from Sn-Ni mixed salt to Sn salt in the electrolytic coloring. According to the study results and practical experience, problems are analyzed and corresponding solutions are proposed.

参考文献/References:

[1] 黄允芳, 蔡锡昌. 铝型材锡盐电解着色液的常见问题及维护[J]. 电镀与精饰, 2015, 37（9）:32-34.
[2] 朱祖芳. 铝合金阳极氧化工艺技术应用手册[M]. 北京:冶金工业出版社, 2007.
[3] 史宏伟, 余泉和, 赵正平, 等. 铝阳极氧化理论[M]. 北京:化学工业出版社, 2018.
[4] 朱祖芳, 周连在, 纪红. 铝阳极氧化作业指南和技术管理[M]. 北京:化学工业出版社, 2015.
[5] 朱祖芳. 铝合金阳极氧化与表面处理技术[M]. 北京:化学工业出版社, 2010.
[6] Tom H, Karhausen K F. Extrusion parameters influencing the anodizing quality[J]. Aluminium Extrusion, 1998, 1:35.

相似文献/References:

[1]徐方强*,邹松华,张 富,等.硫酸-酒石酸钾钠宽温阳极氧化槽液体系研究[J].电镀与精饰,2019,(12):5.[doi:10.3969/j.issn.1001-3849.2019.12.002]
　XU Fangqiang*,ZOU Songhua,ZHANG Fu,et al.Research of Anodizing at Wide Temperature in Sulfuric Acid-Potassium Sodium Tartrate Bath System[J].Plating & Finishing,2019,(12):5.[doi:10.3969/j.issn.1001-3849.2019.12.002]
[2]孙慧艳*,王兴雅,孙鹏飞.钛合金蓝色腐蚀检查工艺技术研究[J].电镀与精饰,2020,(1):36.[doi:10.3969/j.issn.1001-3849.2020.01.008]
　SUN Huiyan*,WANG Xingya,SUN Pengfei.Research on the Blue Corrosion Inspection Technology of Titanium Alloy[J].Plating & Finishing,2020,(12):36.[doi:10.3969/j.issn.1001-3849.2020.01.008]
[3]王志明,高用文,陈旭丹,等.汽车行李架铝阳极氧化耐酸碱工艺开发[J].电镀与精饰,2021,(4):35.[doi:10.3969/j.issn.1001-3849.2021.04.008]
　WANG Zhiming,GAO Yongwen,et al.Development of Acid and Alkali Resistant Aluminum Anodizing Process for Automobile Luggage Rack[J].Plating & Finishing,2021,(12):35.[doi:10.3969/j.issn.1001-3849.2021.04.008]
[4]赵光练*,文璞山.电连接器用ZL101A铝合金混合酸阳极氧化及氧化膜的耐蚀性[J].电镀与精饰,2021,(10):31.[doi:10.3969/j.issn.1001-3849.2021.10.006]
　ZHAO Guanglian*,WEN Pushan.Anodic Oxidation of ZL101A Aluminium Alloy for Electrical Connector with Mixed Acid and Corrosion Resistance of Oxidation Film[J].Plating & Finishing,2021,(12):31.[doi:10.3969/j.issn.1001-3849.2021.10.006]
[5]黄允芳*,蔡锡昌,蒋利民.恒压与恒流两种铝阳极氧化控制方法的比较[J].电镀与精饰,2022,(2):12.[doi:10.3969/j.issn.1001-3849.2022.02.003]
　HUANG Yunfang *,CAI Xichang ?JIANG Limin.Comparison of Two Kinds Control Method of the Constant Voltage and Constant Current for Aluminum Anodizing[J].Plating & Finishing,2022,(12):12.[doi:10.3969/j.issn.1001-3849.2022.02.003]
[6]孙文明*,闫晟煜.阳极氧化和封孔处理改善铝合金表面性能的研究[J].电镀与精饰,2022,(4):20.[doi:10.3969/j.issn.1001-3849.2022.04.005]
　SUN Wenming *,YAN Shengyu.Study on Improvement of Surface Properties of Aluminum Alloy by Anodic Oxidation and Sealing Treatment[J].Plating & Finishing,2022,(12):20.[doi:10.3969/j.issn.1001-3849.2022.04.005]
[7]张华云*,任卫斌,刘治国. 7A04CS板材阳极氧化表面局部发黑分析及解决措施 [J].电镀与精饰,2022,(7):70.[doi:10.3969/j.issn.1001-3849.2022.07.012]
　ZHANG Huayun*,REN Weibin,LIU Zhiguo.Analysis of Local Nigrescence on Anodic Oxide Film Surface of 7A04CS Plate[J].Plating & Finishing,2022,(12):70.[doi:10.3969/j.issn.1001-3849.2022.07.012]
[8]周 琦,宗朋德,王宇峰,等.回溶法氧化铝溶胶封闭铝阳极氧化膜孔[J].电镀与精饰,2023,(2):1.[doi:10.3969/j.issn.1001-3849.2023.02.001]
　Zhou Qi,Zong Pengde,Wang Yufeng,et al.Alumina sol prepared by resolving method to seal the pores in aluminum anodic oxide film[J].Plating & Finishing,2023,(12):1.[doi:10.3969/j.issn.1001-3849.2023.02.001]
[9]凌付平 *.铝合金柠檬酸-硫酸阳极氧化及镍盐-铈盐协同封闭?/div>[J].电镀与精饰,2023,(2):35.[doi:10.3969/j.issn.1001-3849.2023.02.006]
　Ling Fuping *.Anodic oxidation of aluminum alloy in citric acid and sulfuric acid electrolyte and synergistic sealing with nickel salt and cerium salt[J].Plating & Finishing,2023,(12):35.[doi:10.3969/j.issn.1001-3849.2023.02.006]
[10]付广艳,翟召鑫*,任雷,等.聚天冬氨酸对AZ91D镁合金阳极氧化膜性能的影响[J].电镀与精饰,2023,(4):26.[doi:10.3969/j.issn.1001-3849.2023.04.005]
　Fu Guangyan,Zhai Zhaoxin*,Ren Lei,et al.Effect of polyaspartic acid on properties of anodic oxide film of AZ91D magnesium alloy[J].Plating & Finishing,2023,(12):26.[doi:10.3969/j.issn.1001-3849.2023.04.005]
[11]黄允芳,蔡锡昌.铝型材立式阳极氧化线“两头色差”问题的研究[J].电镀与精饰,2019,(1):33.[doi:10.3969/j.issn.1001?3849.2019.01.007]
　HUANG Yunfang,CAI Xichang.Studies on the Problem of “Color Difference between Two Ends” in the Anodizing Vertical Line for the Aluminum Profile[J].Plating & Finishing,2019,(12):33.[doi:10.3969/j.issn.1001?3849.2019.01.007]
[12]黄允芳*,蔡锡昌.二次电解着色法防紫铜色铝型材褪色工艺[J].电镀与精饰,2021,(10):55.[doi:10.3969/j.issn.1001-3849.2021.10.011]
　HUANG Yunfang*,CAI Xichang.Process of the Seconday Electrolytic Coloring Method to Prevent Copper Color Discoloration on Al Profile[J].Plating & Finishing,2021,(12):55.[doi:10.3969/j.issn.1001-3849.2021.10.011]

备注/Memo

收稿日期： 2019-09-29；修回日期： 2019-10-19
通信作者：黄允芳,email：hyfcqr2008@126.com

更新日期/Last Update: 2019-12-10