[1]肖 革,蓝玉良,向可友,等.汽车轻量化钢材及零部件表面处理技术的发展趋势[J].电镀与精饰,2019,(7):25-30.[doi:10.3969/j.issn.1001-3849.2019.07.006]
　XIAO Ge,LAN Yuliang,XIANG Keyou,et al.Development Trend of Surface Treatment Technology for Automobile Lightweight Steel and Parts[J].Plating & Finishing,2019,(7):25-30.[doi:10.3969/j.issn.1001-3849.2019.07.006]
点击复制

汽车轻量化钢材及零部件表面处理技术的发展趋势()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2019年7
页码:
25-30
栏目:
出版日期:
2019-07-15

文章信息/Info

Title:
Development Trend of Surface Treatment Technology for Automobile Lightweight Steel and Parts
作者:
肖 革1; 蓝玉良1; 向可友1; 高荣龙1; 罗泽庭1; 刘慧丛2*; 李卫平2; 朱立群2
1. 珠海市玛斯特五金塑胶制品有限公司，广东 珠海 519175； 2. 北京航空航天大学 材料科学与工程学院，北京 100191
Author(s):
XIAO Ge1;  LAN Yuliang1;  XIANG Keyou1;  GAO Ronglong1;  LUO Zeting1;  LIU Huicong2*;  LI Weiping2;  ZHU Liqun2
1. Zhuhai Master Hardware and Plastic Products Co. Ltd., Zhuhai 519175, China;　2. School of Materials Science and Engineering, Beihang University, Beijing 100191, China
关键词:
汽车轻量化; 高强度钢铁; 耐腐蚀性能; 表面处理技术
Keywords:
automobile lightweight;  high-strength steel;  corrosion resistance;  surface treatment technology
DOI:
10.3969/j.issn.1001-3849.2019.07.006
文献标志码:
A
摘要:
本文针对汽车轻量化用高强度钢铁零件的发展趋势，讨论了这类钢铁材料的特性及近年来的发展情况；同时对汽车高强度钢铁零件的表面性能要求以及相应的表面处理技术进行了综述，尤其是介绍了近年来，针对恶劣严酷服役环境中用的汽车钢铁零件表面的高耐腐蚀、耐磨损等多种功能要求的技术发展。期望汽车轻量化在节约油耗，减少CO2的排放，提高轻量化的高强度钢铁零件的耐腐蚀等性能方面得到更多的关注。
Abstract:
In this paper, according to the development trend of high-strength steel parts for automobile lightweight, the characteristics of such steel materials and their development in recent years were discussed. The surface performance requirements of automotive high-strength steel parts and the corresponding surface treatment technology were introduced. In particular, the technical developments for various functional requirements such as high corrosion resistance, wear resistance of automotive steel parts used in harsh and severe service environments in recent years were described. It is hoped that automobile lightweight will receive more attention in terms of saving fuel consumption, reducing CO2 emissions, and improving the corrosion resistance of lightweight and high-strength steel parts.

参考文献/References:

[1] 杨丽霞, 赵明哲. 汽车轻量化用高强钢的介绍[J]. 科技风, 2015, 10: 64-64.
[2] 康永林. 汽车轻量化先进高强钢与节能减排[J]. 钢铁, 2008, 43(6): 1-7.
[3] 卢凤喜, 王向成. 汽车用高强度表面处理钢板的生产技术特征[J]. 冶金信息导刊, 2006, 3: 14-16.
[4] 康永林,陈贵江,朱国明,等. 新一代汽车用先进高强钢的成形与应用[J]. 钢铁, 2010, 45(8): 1-6.
[5] Lesch C, Kwiaton N, Klose F B. Advanced high strength steels (AHSS) for automotive applications - tailored properties by smart microstructural adjustments[J]. Steel Research International, 2017: 1700210.
[6] Safari H, Nahvi H, Esfahanian M. Improving automotive crashworthiness using advanced high strength steels[J]. International Journal of Crashworthiness, 2018, 23(6): 645-659.
[7] Sun G, Zhang H, Wang R, et al. Multi-objective reliability-based optimization for crashworthy structures coupled with metal forming process[J]. Structural and Multidisciplinary Optimization, 2017, 56(6): 1571-1587.
[8] Tang T, Gao Y, Yao L, et al. Development of high-performance energy absorption structures based on the structure design and nanocrystallization[J]. Materials & design, 2017, 137: 214-225.
[9] Ozcanli M, Dede G. Evaluation of advanced steel usage on seat construction to reduce bus weight in compliance with FMVSS and APTA regulations [J]. International Journal of Heavy Vehicle Systems, 2018, 25(2): 235-247.
[10] Menghan W, Shuaijun W, Zhi L. Multi-step forming punch (MFP) for improving stretch-flange ability of advanced high-strength steel[J]. The International Journal of Advanced Manufacturing Technology, 2018, 99: 1627-1638.
[11] Ruszkiewicz B J, Mears L. Investigation of the electroplastic effect through nominally equal energy deformation[C]. ASME 2018 13th International Manufacturing Science and Engineering Conference, 2018, 6: 18-22.
[12] Thomas B, Matthias N, Andreas F. Numerical-experimental investigation of load paths in DP800 dual phase steel during nakajima test[C]. Proceedings of 21st International Esaform Conference on Material Forming (ESAFORM 2018), AIP Conference Proceedings: 960: UNSP 160021.
[13] 王华, 陆士堃, 欧阳泽华. 最新汽车紧固件表面处理技术[J]. 上海涂料, 2018, 56(3): 48-51.
[14] 徐关庆, 林胜荣. 汽车防护性表面处理技术发展[J]. 电镀与精饰, 2007, 29(4), 27-32.
[15] 刘军松, 刘定富, 苏琪, 等. 电镀Zn-Ni-P合金及其耐蚀性研究[J]. 电镀与精饰, 2019, 41(2): 5-9.
[16] 吴忠. 汽车用ZL101A铝合金表面Ni-Co合金镀层的硬度[J]. 电镀与精饰, 2018, 40(11): 5-9.
[17] 徐良, 向可友, 刘梦兰, 等. 汽车零部件电沉积锌-锰合金镀层进展[J]. 电镀与精饰, 2017, 39(9): 24-27.
[18] 卢帅, 郭昭, 齐海东, 等. 占空比对脉冲电镀Zn-Ni-Mn合金镀层的影响[J]. 电镀与精饰, 2017, 39(11): 1-4.
[19] Kozhukharov S V, Samichkov V I, Girginov C A. Actual trends in the elaboration of advanced multifunctional coating systems for the efficient protection of lightweight aircraft alloys[J]. Corrosion Review, 2017, 35(6): 383-396.
[20] 周阳亮. 高效环保型汽车零配件碱性无氰镀锌的性能对比[J]. 上海涂料, 2018, 56(2): 32-36.
[21] 张靖, 赵晓宏, 高成勇, 等. 汽车用锌镍合金电镀现状及研究进展[M]. 2015中国汽车工程学会年会论文集, 2015, 3: 217-220.
[22] 高荣龙, 向可友, 林建华, 等. Zn-Ni合金镀层中添加第三种元素和纳米颗粒的研究新进展[J]. 表面技术, 2018, 47(10): 262-268.
[23] Lee L, Behera P, Sriraman K R, et al. Effects of humidity on the sliding wear properties of Zn-Ni alloy coatings[J]. RSC Advances, 2017, 7(37): 22662-22671.
[24] Behrouz B, Mohammad G. Electrodeposition of Zn-Ni-P compositionally modulated multilayer coatings: An attempt to deposit Ni-P and Zn-Ni alloys from a single bath[J]. Electrochemistry Communications, 2017, 81: 93-96.
[25] Abou-Krisha M M, Assaf F H, El-Naby S A. The influence of Fe2+ concentration and deposition time on the corrosion resistance of the electrodeposited zinc-nickel-iron alloys[J]. Arabian Journal of Chemistry, 2016, 9(2): S1349-S1356.
[26] Aboukrisha M M, Assaf F H, Alduaij O K, et al. Deposition potential influence on the electrodeposition of Zn-Ni-Mn alloy[J]. Transactions of the Indian Institute of Metals, 2016, 70(1): 31-40.
[27] Das S, Banthia S, Patra A, et al. Novel bilayer Zn, Ni/Ni, Co, SiC nanocomposite coating with exceptional corrosion and wear properties by pulse electrodeposition [J]. Journal of Alloys and Compounds, 2018, 738: 394-404.
[28] Shourgeshty M, Aliofkhazraei M, Karimzadeh A, et al. Corrosion and wear properties of Zn-Ni and Zn-Ni-Al2O3 multilayer electrodeposited coatings[J]. Materials Research Express, 2017, 4(9): 096406.
[29] Abdulwahab M, Fayomi O S I, Popoola A P I, et al. In-situ hybrid study of thermal behaviour of ZnNi and Zn-Ni-Al2O3 nanocrystallite thin films induced TEA/MEA by electrocodeposition[J]. Results in Physics, 2017, 7: 213-215.
[30] RoventiG, Giuliani G, PisaniM, et al. Electrodeposition of Zn-Ni-ZrO2, Zn-Ni-Al2O3 and Zn-Ni-SiC nanocomposite coatings from an alkaline bath[J]. International Journal Electrochemical Science, 2017, 12: 663-678.

相似文献/References:

[1]吴志强,蔡春芳*,齐锐丽,等.汽车轻量化背景下塑料的应用及其电镀工艺[J].电镀与精饰,2023,(4):88.[doi:10.3969/j.issn.1001-3849.2023.04.014]
　Wu Zhiqiang,Cai Chunfang*,Qi Ruili,et al.Application and electroplating process of plastics under the background of automotive lightweight[J].Plating & Finishing,2023,(7):88.[doi:10.3969/j.issn.1001-3849.2023.04.014]

备注/Memo

备注/Memo:
收稿日期： 2019-05-28；修回日期： 2019-06-15
作者简介：肖革（1966-），男，学士，工程师，email：xiaoge@mstzh.com
通信作者： 刘慧丛，email：liuhc@buaa.edu.cn
基金项目： 国家重点研发计划（2018YFB2002000）；国家自然科学基金项目（U1637204）
更新日期/Last Update: 2019-07-10