[1]索 帅*,李 文,杜宝帅,等.无氰电刷镀银镀层性能研究[J].电镀与精饰,2022,(2):7-11.[doi:10.3969/j.issn.1001-3849.2022.02.002]
　SUO Shuai*,LI Wen,DU Baoshuai,et al.Study on Properties of Cyanide-Free Silver Coating by Electro-Brush Plating[J].Plating & Finishing,2022,(2):7-11.[doi:10.3969/j.issn.1001-3849.2022.02.002]
点击复制

无氰电刷镀银镀层性能研究(/HTML)

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2022年2
页码:
7-11
栏目:
出版日期:
2022-01-12

文章信息/Info

Title:
Study on Properties of Cyanide-Free Silver Coating by Electro-Brush Plating
作者:
索 帅1*; 李 文1; 杜宝帅2; 张忠文1; 2; 李新梅2; 步衍江1; 张鲁宁1
（1.山东电力工业锅炉压力容器检验中心有限公司，山东 济南 250002； 2.国网山东省电力公司电力科学研究院，山东 济南 250002）
Author(s):
SUO Shuai1*;  LI Wen1;  DU Baoshuai2;  ZHANG Zhongwen1; 2;  LI Xinmei2; BU Yanjiang1;  ZHANG Luning1
( 1.Shandong Electric Power Industry Boiler & Pressure Vessel Inspection Center Co. Ltd. Jinan 250002 China 2.State Grid Shandong Electric Power Research Institute Jinan 250002 China )
关键词:
丁二酰亚胺; 亚氨基二磺酸铵; 电刷镀银; 外观; 厚度; 硬度; 摩擦磨损性能
Keywords:
succinimide ammonium iminodisulfonate silver electro-brush plating appearance thickness hardness friction and wear properties
分类号:
TQ153.16
DOI:
10.3969/j.issn.1001-3849.2022.02.002
文献标志码:
A
摘要:
分别采用以丁二酰亚胺和亚氨基二磺酸铵为主配位剂的两种无氰镀银液，通过电刷镀工艺成功在紫铜基体表面制备出了镀银层。通过 X 射线光谱法、 SEM 、 EDS 、显微硬度及摩擦磨损实验等分析方法，对镀银层外观、厚度、微观形貌、硬度以及摩擦磨损性能等方面进行了分析及比较。结果表明：两种体系制备出的镀银层外观均平整光亮，厚度及硬度均满足 Q/GDW 11718.1 - 2017 标准中的要求，磨损机制均为黏着磨损及磨粒磨损，其中丁二酰亚胺体系镀液制备出的镀银层性能要优于亚氨基二磺酸铵体系，其微观表面更加平整，颗粒排列更加致密，镀层厚度均值达 28.24 μ m ，硬度均值达 135.4 HV ，磨损速率为 0.1375 mg/m 。
Abstract:
Silver coating was successfully prepared on copper substrates by electro-brush plating with succinimide and ammonium iminodisulfonate as main complex agents respectively. The appearance ， thickness ， micro morphology ， hardness ， friction and wear properties of the silver coatings were analyzed and compared by means of X-ray spectroscopy ， SEM ， EDS ， microhardness test ， friction and wear test. The results showed that the silver coating prepared by the two systems had smooth and bright appearance ， the thickness and hardness met the requirements of Q/GDW11718.1 - 2017 standard ， and the wear mechanism was adhesive wear and abrasive wear. By comparison ， the performance of silver plating layer prepared by succinimide system was better than that of ammonium iminodisulfonate system. The micro surface was smoother ， the particle arrangement was more compact ， the average thickness of the coating was 28.24 μ m ， the average hardness was 135.4 HV ， and the wear rate was 0.1375 mg/m.

参考文献/References:



[1] 徐雪霞 , 冯砚厅 , 柯浩 , 等 . 高压隔离开关触头镀银层质量检测分析 [J]. 河北电力技术 , 2013, 32(3): 3-5+11.

Xu X X, Feng Y T, Ke H, et al. Analysis on silver coating quality inspection for high voltage switch finger [J]. Hebei Electric Power, 2013, 32(3): 3-5+11 (in Chinese).

[2] 曹春博 , 王慧源 . 隔离开关触指镀银层现场修复新工艺的应用 [J]. 内蒙古电力技术 , 2017, 35(6): 66-69.

Cao C B, Wang H Y. New process application in field repair of plated silver layer on contact finger of disconnector [J]. Inner Mongolia Electric Power, 2017, 35(6): 66-69 (in Chinese).

[3] 王宗礼 , 邹津耘 , 邵爱云 . 丁二酰亚胺镀银的研究 [J]. 武汉大学学报 ( 自然科学版 ), 1979, (4): 53-63.

Wang Z L, Zou J Y, Shao A Y. Study on silver plating with succinimide [J]. Journal of Wuhan University (Natural Science Edition), 1979, (4): 53-63 (in Chinese).

[4] 白祯遐 , 黄锁让 . 无氰光亮镀银 [J]. 电镀与环保 , 2001, (1): 21-23.

Bai Z X, Huang S R. Cyanide free bright silver plating [J]. Electroplating & Pollution Control, 2001, (1): 21-23 (in Chinese).

[5] 索帅 , 李新梅 , 杜宝帅 , 等 . 乙二胺四乙酸二钠体系电刷镀银 [J]. 电镀与涂饰 , 2020, 39(14): 897-900.

Suo S, Li X M, Du B S, et al. Silver electro-brush plating in disodium ethylenediamine tetraacetate system [J]. Electroplating & Finishing, 2020, 39(14): 897-900 (in Chinese).

[6] 陈垚 . 磁控溅射沉积制备 Cu/C 镀层及其摩擦学性能研究 [D]. 西安 : 长安大学 , 2019.

[7] 刘静 , 张涛 , 张曰涛 , 等 . AZ91D 镁合金 Ni-W-P 多层化学镀层的摩擦磨损及耐腐蚀性能 [J]. 中国表面工程 , 2019, 32(4): 53-62.

Liu J, Zhang T, Zhang Y T, et al. Friction, wear and corrosion resistance of multi-layer electroless Ni-W-P coating on AZ91D magnesium alloy [J]. China Surface Engineering, 2019, 32(4): 53-62 (in Chinese).

[8] 陈吉会 , 郭巧琴 , 郭永春 , 等 . 多弧离子镀 AlSn20 减摩镀层组织与摩擦性能研究 [J]. 西安工业大学学报 , 2020, 40(4): 434-441.

Chen J H, Guo Q Q, Guo Y C, et al. Study on the microstructure and friction properties of AlSn20 anti-friction coating via multi arc ion plating [J]. Journal of Xian Technological University, 2020, 40(4): 434-441 (in Chinese).

[9] 赵东平 , 郭金强 , 李轩 . TC4 合金表面 Cu/ 石墨复合镀层的组织结构和摩擦磨损行为 [J]. 稀有金属材料与工程 , 2020, 49(8): 2861-2868.

Zhao D P, Guo J Q, Li X. Microstructure and tribological behavior of Cu/graphite composite coating on TC4 alloy [J]. Rare Metal Materials and Engineering, 2020, 49(8): 2861-2868 (in Chinese).

[10] 王庆武 , 李聪 . 镀液中二硫化钼添加量对镍 - 二硫化钼复合电镀层耐磨性的影响 [J]. 电镀与涂饰 , 2020, 39(4): 179-182.

相似文献/References:

[1]徐铭孝,战充波,张司琪,等. 丁二酰亚胺对低共熔溶剂中银成核机理的影响 [J].电镀与精饰,2024,(3):34.[doi:10.3969/j.issn.1001-3849.2024.03.005]
　Xu Mingxiao,Zhan Chongbo,Zhang Siqi,et al.Effect of succinimide on the nucleation mechanism of silver in deep eutectic solvents[J].Plating & Finishing,2024,(2):34.[doi:10.3969/j.issn.1001-3849.2024.03.005]

备注/Memo

备注/Memo:
收稿日期： 2020-10-28 修回日期： 2020-12-03 通信作者： 索帅（ 1994 —），男，本科，助理工程师， email ： 839200348@qq.com
更新日期/Last Update: 2022-01-24