[1]郭崇武*,张 彪,吕成斌,等.氯化钾滚镀锌关键技术的开发研究[J].电镀与精饰,2024,(2):92-95.[doi:10.3969/j.issn.1001-3849.2024.02.013]
　Guo Chongwu*,Zhang Biao,Lyu Chengbin,et al.Study on development of key technology of potassium chloride roll-galvanizing[J].Plating & Finishing,2024,(2):92-95.[doi:10.3969/j.issn.1001-3849.2024.02.013]
点击复制

氯化钾滚镀锌关键技术的开发研究
()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2024年2
页码:
92-95
栏目:
出版日期:
2024-02-15

文章信息/Info

Title:
Study on development of key technology of potassium chloride roll-galvanizing
作者:
3-12-25 * 通信作者： 郭崇武( 1960 —)
Author(s):
( 1. Guangzhou Ultra Union Chemicals Ltd. Guangzhou 510460 China 2. Tianjin Liqun Investment Co. Ltd. Tianjin 301900 China 3. Tianjin Feige Group United Chemical Plant Tianjin 300163 China 4. Tianjin Huayuan Wire Products Co. Ltd. Tianjin 301606 China 5. Tianjin Outstanding Metal Products Co. Ltd. Tianjin 301900 China 6. Nantong Hai’an Runze Surface Treatment Co. Ltd. Hai’an 226600 China 7.Shanghai Finishing Surface Treatment Technology Co. Ltd. Shanghai 201799 China )
关键词:
氯化钾滚镀锌; 第一镀槽; 第二镀槽; 亚铁离子; 锌铁合金镀层; 镀锌层
Keywords:
potassium chloride roll-galvanizing ;  the first electroplating bath ;  the second electroplating bath ;  ferrous ion ;  zinc-iron alloy coating ;  galvanized coating
分类号:
TQ153
DOI:
10.3969/j.issn.1001-3849.2024.02.013
文献标志码:
A
摘要:
在氯化钾滚镀锌槽中间加隔板将其分成两个滚镀锌槽。第一镀槽中的亚铁杂质视作镀液的有效成分，将镀锌改为镀锌铁合金。第二镀槽切断了亚铁杂质的主要来源，用于制备高质量的镀锌层。钢铁件在第一镀槽中镀锌铁合金制备底镀层，然后在第二镀槽中镀锌得到面镀层，从而消除了铁杂质对氯化钾镀锌的不良影响，克服了传统工艺镀层出现滚桶眼子印和钝化困难等技术缺陷。本工艺无需处理氯化钾镀锌槽中的铁杂质，解决了用双氧水氧化处理法导致镀液性能下降的问题。结果表明：所制备的镀锌铁合金与镀锌组合镀层的耐蚀性高于传统的镀锌层。本工艺镀液维护简单，镀液和镀层性能优于传统工艺，具有良好的应用前景。
Abstract:
： A potassium chloride roll-galvanizing bath was changed into two roll-galvanizing bathes by adding a partition in the middle of the bath. The ferrous impurity in the first plating bath was regarded as the effective component ， and the zinc plating was changed to zinc-iron alloy plating. Thereby ， the main source of ferrous impurity was cut off ， and the second bath was used to prepare for high quality galvanized layers. In the first plating bath ， zinc-iron alloy plating was carried out on steel parts to prepare for the bottom coating ， and then galvanizing was done in the second bath to obtain surface coating ， which eliminated the adverse effects of iron impurities on potassium chloride galvanizing and overcame the technical defects of the traditional process such as barrel roll hole marks and passivation difficulty. The process did not need to deal with iron impurity in the potassium chloride galvanized bath ， so it solved the problem of performance decrease in the bath after treating by hydrogen peroxide oxidation. The test shows that corrosion resistance of the composite coating using zinc-iron alloy plating and galvanizing is higher than that of the traditional galvanized coating. The bath is simple to maintain ， the properties of the bath and coating are better than that of the traditional process ， so it has a good application prospect.

参考文献/References:



[1] 沈品华 , 宋长城 . 高性能氯化物镀锌光亮剂的研制 [J]. 材料保护 , 2006, 39(1): 58-61.

[2] 袁诗璞 . 氯化钾镀锌的生产应用现状 [J]. 材料保护 , 2008, 41(3): 71-74, 83.

[3] 马冲 . 无氰镀锌技术的发展和工业应用的现状 [J]. 电镀与涂饰 , 2011, 30(6): 46-49.

[4] 詹益腾 , 胡明 . 氯化钾镀锌工艺的发展 [J]. 电镀与涂饰 , 2012, 31(2): 20-22.

[5] 詹益腾 , 胡明 , 李伟善 , 等 . 低泡型氯化钾镀锌 [J]. 电镀与涂饰 , 2013, 32(2): 6-8.

[6] 郭崇武 . 低泡型氯化钾镀锌工艺的开发与镀层性能研究 [J]. 电镀与涂饰 , 2014, 33(15): 651-655.

[7] 夏亮 , 林安 , 郭崇武 . 适用于航空航天零部件的氯化钾镀锌工艺 [J]. 电镀与涂饰 , 2021, 40(17): 1328-1331.

[8] 郭崇武 , 吴杰 . 酸性镀锌溶液中铁杂质的处理方法 [J]. 电镀与精饰 , 2009, 31(9): 23-25.

[9] 广州超邦化工有限公司 . 一种酸性镀锌方法 : 中国 , 202111515887.4 [P]. 2023-04-11.

[10] 广州超邦化工有限公司 . 羟基石墨烯改性镀层封闭剂及其制备方法 : 中国 , 201711406847.X [P]. 2019-04-19.

[11] 郭崇武 , 赖奂汶 , 夏亮 . 氧化石墨烯在镀层封闭剂中的性能研究 [J]. 电镀与涂饰 , 2021, 40(9): 696-700.

[12] 黎小阳 , 郭崇武 . 铸铁件氯化钾镀锌与石墨烯封闭工艺 [J]. 电镀与精饰 , 2022, 44(8): 58-60.

备注/Memo

备注/Memo:
收稿日期： 2023-12-14 修回日期： 2023-12-25 * 通信作者： 郭崇武（ 1960 —），男，腐蚀与防护教授级高级工程师，从事电镀添加剂与电镀工艺开发工作， email ： chongwu.guo@ultro-union.com?/html>
更新日期/Last Update: 2024-02-05