Qiu Xinxin,i Shaohua.Research and application on heavy oil-separated water-based cleaning agent for aluminum products?/html>[J].Plating & Finishing,2024,(8):98-105.[doi:10.3969/j.issn.1001-3849.2024.08.015]
铝制品加工重油污分油水基清洗剂研究及生产应用
- Title:
- Research and application on heavy oil-separated water-based cleaning agent for aluminum products?/html>
- Keywords:
- water-based cleaning agent ; aluminium product ; heavy oil ; oil removal ; reuse and regeneration of stretch oil ; energy conservation and emissions reduction
- 分类号:
- TQ 649.6
- 文献标志码:
- A
- 摘要:
- 大量铝制品在拉伸成型过程中会涂抹拉伸油以防止产品拉伤、断裂,为清洗其表面残留的重油污,需采用含有大量表面活性剂的清洗剂。为解决传统铝制品清洗中清洗难度大、污染排放多的问题,研究了一款分油水基清洗剂。研究结果表明:该分油水基清洗剂属于低泡型清洗剂,在清洗温度 50 ℃ ,清洗时间 5 min ,清洗剂浓度 5% 的条件下清洗效果最优,除油率可达 99% 以上,各项性能可满足行业标准 JB/T 4323 — 2019 《水基金属清洗剂》中的要求。实际生产应用结果表明,分油水基清洗剂的清洗量超过常规水基清洗剂的 32 倍,每清洗一百万个电池壳,能减少浓水排放量 116.25 t 、危废量 16.25 t ,对企业增效和节能减排具有深远意义。
- Abstract:
- : A large number of aluminum products will be coated with stretching oil in the process of stretching molding to prevent product from being strained and broken. In order to clean the heavy oil residue on the surface , it is necessary to use a cleaning agent containing a large number of surfactants. To solve the problems of difficult cleaning and high pollution emissions in traditional aluminum product cleaning , an oil-separated water-based cleaning agent was studied.The results show that the oil-separated water-based cleaning agent is a low foam type cleaning agent , and the cleaning effect is the best under the conditions of cleaning temperature of 50 ℃ , cleaning time of 5 min and cleaning agent concentration of 5% , the oil removal rate can reach over 99%.The performance meets the requirements of water-based metal cleanser industry standard of JB/T 4323 — 2019. The actual application results show that the cleaning amount of oil-separated water-based cleaning agent exceeds 32 times that of conventional water-based cleaning agent , and cleaning one million battery shells can reduce the discharge of concentrated water by 116.25 t and hazardous waste volume by 16.25 t , which has profound significance for enterprise efficiency improvement and energy conservation and emission reduction.
参考文献/References:
[1] 熊柏青 , 闫宏伟 , 张永安 , 等 . 我国航空铝合金产业发展战略研究 [J]. 中国工程科学 , 2023, 25(1): 88-95.
[2] 申依伦 , 冯光 , 郜豪杰 , 等 . 镁 / 铝复合薄带轧制成形工艺研究 [J]. 塑性工程学报 , 2023, 30(8): 92-99.
[3] Dong F, Huang S Q, Yi Y P, et al. Enhanced deep drawing formability and deformation mechanism of aluminum alloy at cryogenic temperature[J]. Journal of Alloys and Compounds, 2023, 968: 171992.
[4] 房洪杰 , 刘慧 , 孙杰 , 等 . 5××× 系铝合金研究现状及发展趋势 [J]. 材料导报 , 2023, 37(21): 211-220.
[5] 庞嘉尧 , 张萃 , 程伟 . 铝合金疲劳性能研究进展 [J]. 特种铸造及有色合金 , 2022, 42(6): 717-726.
[6] Yao E Z, Zhang H J, Ma K, et al. Effect of deep cryogenic treatment on microstructures and performances of aluminum alloys: A review[J]. Journal of Materials Research and Technology, 2023, 26: 3661-3675.
[7] 高虹 , 王超 , 姜波 , 等 . TiO 2 -PTFE 对 6063 铝合金微弧氧化膜层的影响 [J]. 材料保护 , 2023, 56(6): 128-136.
[8] Yan P, Wang Y B, Jin X L, et al. Effect of cutting fluid on high strain rate dynamic mechanical property and cutting performance of nickel based superalloy[J]. Journal of Materials Research and Technology, 2022, 17: 1146-1158.
[9] 韩钊 , 孙建林 , 唐华杰 , 等 . 铝材轧制油摩擦学性能的分子动力学模拟与实验研究 [J]. 中国有色金属学报 , 2022, 32(5): 1342-1350.
[10] 严卫才 , 王帅 , 刘昌明 , 等 . 新型铝合金脱脂剂工艺试验探究 [J]. 有色金属加工 , 2021, 50(3): 56-58.
[11] 刘万青 , 何园 . 一种无磷无铬无氮的铝合金除油酸洗除灰技术研究 [J]. 材料保护 , 2020, 53(S1): 26-29.
[12] 李英朋 , 张于涛 , 姜春泉 , 等 . 2A12 铝合金水基切削液的缓蚀和润湿性能研究 [J]. 材料保护 , 2023, 56(9): 22-29, 38.
[13] 季伟 , 孟繁东 , 潘科宇 , 等 . 铝合金表面油污清洗剂的制备及其腐蚀性研究 [J]. 电镀与精饰 , 2021, 43(2): 38-43.
[14] 盘茂东 , 陈喜良 , 范宏亮 . 水性高效增光防锈金属清洗剂的研制 [J]. 电镀与涂饰 , 2019, 38(5): 224-228.
[15] Zang J. The Preparation and test of green water-based metal cleaning agent[J]. Advanced Materials Research, 2014, 1015: 312-315.
[16] 孔德刚 . 铝板带清洗工艺对表面质量的影响 [J]. 海峡科技与产业 , 2018(4): 79-80.
[17] 张冠军 , 胡志达 , 石磊 , 等 . 铝带材清洗工艺探讨与相关参数确定 [J]. 锻压装备与制造技术 , 2019, 54(3): 91-94.
[18] 窦忠友 . 铝板带碱清洗机组设备配置及技术难点分析 [J]. 有色金属加工 , 2022, 51(3): 56-59, 67.
[19] 古蒙蒙 , 蔡卫权 . 高效绿色多功能水基清洗剂的研制 [J]. 化工进展 , 2016, 35(10): 3301-3305.
[20] 杨智春 , 刘保 . 一种高效铝材清洗剂的制备与性能研究 [J]. 广东化工 , 2020, 47(12): 48-50.
[21] 蒋泽文 , 任蕙岚 , 何家伟 , 等 . 脱脂技术研究进展 [J]. 电镀与精饰 , 2020, 42(11): 29-38.
[22] 陶源 , 张威 , 王丰收 . 环保型水基金属清洗剂的研制及其性能研究 [J]. 应用化工 , 2019, 48(12): 2872-2875.
[23] 韦连伟 . 金属表面重油污清洗剂综述 [J]. 民营科技 , 2018(3): 18.
[24] 陈洁琼 . 防锈型水基金属清洗剂的研究与开发 [J]. 中国洗涤用品工业 , 2022(5): 55-58.
[25] 沈志刚 , 陈英瑞 . 含油废水破乳除油的试验研究及工业应用 [J]. 化工环保 , 2000(3): 31-33.
[26] 桑义敏 , 李发生 , 何绪文 , 等 . 含油废水性质及其处理技术 [J]. 化工环保 , 2004(S1): 94-97.
[27] 杨春永 . 浅析我国工程机械的发展趋势及对润滑油的新需求 [J]. 润滑油 , 2020, 35(6): 1-8.
相似文献/References:
[1]季 伟,孟繁东,潘科宇,等.铝合金表面油污清洗剂的制备及其腐蚀性研究[J].电镀与精饰,2021,(2):38.[doi:10.3969/j.issn.1001-3849.2021.02.0080]
JI Wei,MENG Fandong,PAN Keyu,et al.季 伟1,孟繁东1,潘科宇1,王文军1,潘明华1,韩怡秋2,邵明亮2,刘 东3,周 勇3*[J].Plating & Finishing,2021,(8):38.[doi:10.3969/j.issn.1001-3849.2021.02.0080]
备注/Memo
收稿日期: 2023-10-07 修回日期: 2023-11-05 作者简介: 张明阳( 1998 ―),男,硕士研究生,研究方向为废水低碳处理及资源回收, email : 919275476@qq.com * 通信作者: 刘锋( 1974 ―), email : 278834585@qq.com 基金项目: 江苏省高校自然科学基金面上项目( 21KJB610016 );苏州市科学技术计划项目( SS202114 , ZXL2022066 , RC2022244 )?/html>