[1]刘子豪,王保杰*,邢馨月,等.doi: 10.3969/j.issn.1001-3849.2025.09.016酸比对镁锂合金表面钙系磷酸盐化学转化膜的耐腐蚀性影响[J].电镀与精饰,2025,(09):112-118.
 Liu Zihao,Wang Baojie*,Xing Xinyue,et al.Effect of acid ratio on corrosion resistance of calcium phosphate chemical conversion film on magnesium-lithium alloy surface[J].Plating & Finishing,2025,(09):112-118.
点击复制

doi: 10.3969/j.issn.1001-3849.2025.09.016酸比对镁锂合金表面钙系磷酸盐化学转化膜的耐腐蚀性影响()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2025年09
页码:
112-118
栏目:
出版日期:
2025-09-30

文章信息/Info

Title:
Effect of acid ratio on corrosion resistance of calcium phosphate chemical conversion film on magnesium-lithium alloy surface
作者:
刘子豪王保杰*邢馨月王 鹏初文超孙 杰
(沈阳理工大学 环境与化学工程学院,辽宁 沈阳 110159)
Author(s):
Liu Zihao Wang Baojie* Xing Xinyue Wang Peng Chu Wenchao Sun Jie
(School of Environmental and Chemical Engineering, Shenyang Ligong University, Shenyang 110159, China)
关键词:
镁锂合金化学转化膜酸比耐腐蚀性
Keywords:
magnesium-lithium alloy chemical conversion film acid ratio corrosion resistance
分类号:
TG178
文献标志码:
A
摘要:
以Mg-8Li合金作为基体,在不同酸比条件下制备钙系磷酸盐转化膜, 通过扫描电子显微镜、能谱仪、点滴实验、电化学阻抗谱图(EIS)、动电位极化曲线、析氢测试对其微观组织进行表征,并比较其耐蚀性。研究结果表明,镁锂合金表面成功制备银白色钙系磷酸盐转化膜,膜层表面光滑且致密无裂纹,其主要元素组成为氧、磷、钙、碳、镁和钠;酸比为75时,腐蚀电流密度最低,为5.227×10?7 A/cm 2,腐蚀电位最正,为?1.481 V (vs. SCE);金属出现变色历经时间最长,为31.5 s;析氢量最少,为2.57 mL/cm2。钙系磷酸盐转化膜在酸比为75的条件下形成的转化膜对于Mg-8Li基体的保护性最好,耐腐蚀性能最佳。
Abstract:
Calcium based phosphate conversion coatings were prepared at the surface of Mg-8Li alloy under different acid ratios. The microstructure of the coatings and corrosion behavior was studied by scanning electron microscopy, energy dispersive spectroscopy, drop experiments, electrochemical impedance spectroscopy (EIS), potentiodynamic polarization curves and hydrogen evolution tests. The results indicate that a silver white calcium-based phosphate conversion film has been successfully prepared on the surface of magnesium lithium alloys, which is smooth, dense, and crack free. Its main elemental composition is oxygen, phosphorus, calcium, carbon, magnesium, and sodium; When the acid ratio is 75, the film have the lowest corrosion current density of 5.227×10?7 A/cm 2, the most positive corrosion potential of ?1.481 V (vs. SCE), the longest metal discoloration time of 31.5 seconds and the lowest hydrogen evolution rate of 2.57 mL/cm2. The conversion film formed by calcium phosphate conversion film under the condition of acid ratio of 75 has the best corrosion resistance for Mg-8Li alloy

参考文献/References:

[1].Zhang C Y, Liao S J, Yu B X, et al. Ratio of total acidity to pH value of coating bath: A new strategy towards phosphate conversion coatings with optimized corrosion resistance for magnesium alloys[J]. Corrosion Science, 2019, 15(4): 279-295.
[2].Liao S, Yu B, Zhang X, et al. new design principles for the bath towards chromate- and crack-free conversion coatings on magnesium alloys[J]. Journal of Magnesium and Alloys, 2019, 9(2): 505-519.
[3].董丽惠, 王华, 李琳. AZ31B镁合金钒/硅烷复合转化膜的制备与表征[J]. 表面技术, 2024, 53(4): 34-45.
[4].李勇. 镁合金表面无铬化学转化处理液工艺参数最佳范围的研究[J]. 表面技术, 2008, 37(4): 49-51.
[5].李昆达, 张建强, 赵慧敏, 等. AZ31B镁合金表面镍基复合镀层的制备及耐蚀性能研究[J]. 热加工工艺, 2024, 53(10): 22-27.
[6].刘晓佳. 镁合金表面镍基镀层工艺及耐磨耐蚀性能研究[D]. 西安: 西安科技大学, 2020.
[7].孙博康. 镁合金表面改性LDH复合膜结构调控及耐腐蚀性能研究[D]. 银川: 宁夏大学, 2023.
[8].李爱霞, 余海军, 谢英豪. 定向循环技术回收制锂的研究进展[J]. 电池, 2024, 54(1): 111-115.
[9].马嘉玲, 宋焕巧, 何志宏, 等. 锂离子电容器负极材料的研究进展[J]. 电池, 2024, 54(1): 107-110.
[10].李赟, 孟艳花. 电池储能系统和功率调节技术研究进展[J]. 电池, 2024, 54(6): 883-888.
[11].安艳丽, 刘苗苗, 杜华云. 磷化液pH值对磷酸盐转化膜在镁合金AZ91D表面成型及耐蚀性的影响[J]. 材料保护, 2022, 55(11): 14-21.
[12].易爱华, 祝闻, 雷华, 等. AZ91D镁合金表面钼-钛-锰导电膜化学转化工艺及其性能研究[J]. 电镀与涂饰, 2024, 43(3): 55-63.
[13].Ortiz C H, Aperador W, Caicedo J C. Electrochemical study of anodized AZ31 magnesium alloy (Mg/MgO) immersed under watered cementice paste[J]. Journal of Materials Engineering and Performance, 2022, 31(11): 8896-8905.
[14].Shang W, Zhan X Q, Wen Y Q, et al. Deposition mechanism of electroless nickel plating of composite coatings on magnesium alloy[J]. Chemical Engineering Science, 2019, 2(7): 1299-1308.
[15].Li T, Leng Z J, Wang X T, et al. Microstructure and electrical conductivity of electroless copper plating layer on magnesium alloy micro-arc oxidation coating[J]. Transactions of Nonferrous Metals Society of China, 2022, 32(12): 3950-3962.
[16].Du H Y, An Y L, Wei Y H, et al. Experimental and numerical studies on strength and ductility of gradient-structured iron plate obtained by surface mechanical-attrition treatment[J]. Materials Science and Engineering A, 2018, 744(28): 471-480.
[17].曾荣昌, 韩恩厚. 材料的腐蚀与防护[M]. 北京: 化学工业出版社, 2006: 8-34.
[18].Jayaraj J, Amruth Raj S, Srinivasan A, et al. Composite magnesium phosphate coatings for improved corrosion resistance of magnesium AZ31 alloy[J]. Corrosion Science, 2016, 113(12): 104-115.
[19].Pommiers-belin S, Frayret J, Uhart A, et al. Determination of the chemical mechanism of chromate conversion coating on magnesium alloys EV31A[J]. Applied Surface Science, 2014, 298(14): 199-207.
[20].Mosialek M, Mordarski G, Nowak P, et al. Phosphate-permanganate conversion coatings on the AZ81 magnesium alloy: SEM, EIS and XPS studies[J]. Surface and Coatings Technology, 2011, 206(1): 51-62.
[21].许祖滨, 宋影伟, 单大勇, 等. 成膜温度对AZ80镁合金磷酸盐转化膜微裂纹形成及耐蚀性的影响[J]. 表面技术, 2016, 45(12): 23-27.
[22].陈阳, 郝建军, 郭雪. AZ91D镁合金磷酸盐转化膜的制备与表征[J]. 电镀与环保, 2016, 36(2): 36-38.
[23].Chen X B, Birbilis N, Abbott T B, Effect of Ca2+ and PO 43? levels on the formation of calcium phosphate conversion coatings on die-cast magnesium alloy AZ91D[J]. Corrosion Science, 2012, 55(2): 226-232.
[24].Chen X B, Zhou X, Abbott T B, et al. Double-layered manganese phosphate conversion coating on magnesium alloy AZ91D: Insights into coating formation, growth and corrosion resistance[J]. Surface and Coatings Technology, 2013, 25(2): 147-155.
[25].Wu Q H, Thissen A, Jaegermann W, et al. Photoelectron spectroscopy study of oxygen vacancy on vanadium oxides surface[J]. Applied Surface Science, 2004, 236(1): 473-478.
[26].张春艳. 溶液酸比及金属表面状态对镁合金磷酸盐转化膜耐蚀性能的影响[D]. 哈尔滨: 哈尔滨工程大学, 2020.
[27].Liao S J, Yu B X, Zhang X L, el al. new design principles for the bath towards chromate and crack free conversion coatings on magnesium alloys[J]. Journal of Magnesium and Alloys, 2021, 15(3): 505-519.
[28].张书弟, 何欢欢, 许宇恒, 等. AZ91D镁合金锰系磷酸盐转化膜的研究:磷化液各组分及含量对耐蚀性能的影响[J]. 材料导报, 2022, 36(S01): 354-359.
[29].唐林, 郑岷, 张涛. 高耐腐蚀锌钙系中温磷化液的研制[J]. 材料保护, 2003, 36(8): 56-57.

相似文献/References:

[1]方云鹏,杜克勤*,郭泉忠,等.负向电压对LA91镁锂合金微弧氧化膜耐蚀性的影响[J].电镀与精饰,2021,(3):21.[doi:10.3969/j.issn.1001-3849.2021.03.005]
 FANG Yunpeng,DU Keqin*,et al.方云鹏1,2,杜克勤1*,郭泉忠1,2,王勇1,潘晓春3[J].Plating & Finishing,2021,(09):21.[doi:10.3969/j.issn.1001-3849.2021.03.005]
[2]张 奇,马 勤*.镁锂合金表面处理技术的研究进展[J].电镀与精饰,2021,(6):41.[doi:10.3969/j.issn.1001-3849.2021.06.009]
 ZHANG Qi,MA Qin*.Research Progress on Surface Treatment Technology of Magnesium-Lithium Alloy[J].Plating & Finishing,2021,(09):41.[doi:10.3969/j.issn.1001-3849.2021.06.009]
[3]王 鹏,王保杰*,宫晓婷,等.doi: 10.3969/j.issn.1001-3849.2025.12.010十二烷基苯磺酸钠对化学转化膜耐蚀性的影响[J].电镀与精饰,2025,(12):71.
 Wang Peng,Wang Baojie*,Gong Xiaoting,et al.Effects of sodium dodecyl benzene sulfonate on the corrosion resistance of chemical conversion coating[J].Plating & Finishing,2025,(09):71.

更新日期/Last Update: 2025-09-11