[1]殷世坤*,郭岩,解二伟,等.化铣生产中激光刻型技术的应用优势探讨[J].电镀与精饰,2021,(3):32-36.[doi:10.3969/j.issn.1001-3849.2021.03.0070]
　YIN Shikun*,GUO Yan,XIE Erwei,et al.殷世坤1*，郭岩2，解二伟1，张雪锋1[J].Plating & Finishing,2021,(3):32-36.[doi:10.3969/j.issn.1001-3849.2021.03.0070]
点击复制

化铣生产中激光刻型技术的应用优势探讨()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2021年3
页码:
32-36
栏目:
出版日期:
2021-03-15

文章信息/Info

Title:
殷世坤1*，郭岩2，解二伟1，张雪锋1
作者:
殷世坤1*; 郭岩2; 解二伟1; 张雪锋1
1.航空工业沈阳飞机工业（集团）有限公司，辽宁 沈阳 110034； 2.空军装备部驻沈阳地区第一军事代表室，辽宁 沈阳 110034
Author(s):
YIN Shikun1*; GUO Yan2;  XIE Erwei1;  ZHANG Xuefeng1
1.Shenyang Aircraft Industry （Group） Co. Ltd.， Shenyang 110034， China； 2. The First Military Representative Room of the Air Force Armament Department in Shenyang， Shenyang 110034， China
关键词:
化铣; 激光刻型技术; 优势; 使用限制因素
Keywords:
milling laser engraving technology advantage limiting factor
DOI:
10.3969/j.issn.1001-3849.2021.03.0070
文献标志码:
A
摘要:
激光刻型技术在国内航空领域的化铣生产中得到初步应用。与传统手工刻型工艺相比，具备刻型精度高、效率高、降低工装成本等优势。但激光刻型技术的应用也有诸多限制因素，包括化铣毛料的加工精度要求高、多台阶化铣零件应用的线性密封剂保护性能要求较高、以及刻型质量的快速检测方法的缺乏等。
Abstract:
Laser engraving technology has been preliminarily applied in domestic aviation milling production. Compared with traditional manual engraving technology, it has advantages of high precision, high efficiency and reduced tooling cost. At the same time, there are also many limiting factors in the application of laser engraving technology, including high machining accuracy requirement of milling raw materials, high linear sealant protection performance requirement of multi-step milling parts, and the lack of rapid detection method of engraving quality, etc.

参考文献/References:

[1] 李善芝, 柳丕, 李文光. 运载火箭贮箱壁板化铣旋转设备的设计[J]. 航天制造技术, 2010, 1:58-60.
Li S Z, Liu P, Li W G. Design of the wall milling and rotating equipment of carrier tank of carrier rocket[J]. Aerospace Manufacturing Technology, 2010, 1:58-60（in Chinese）.
[2] 孙新, 张政斌, 陈素明. 激光刻型技术在铝合金化学铣切中的应用[J]. 科技传播, 2016, 8（11）:227-228.
Sun X, Zhang Z B, Chen S M. Application of laser engraving technology in chemical milling of aluminum alloy[J]. Science Communication, 2016, 8（11）:227-228（in Chinese）.
[3] 于建龙, 熊伟, 李清材, 等. 激光刻型线缝密封胶的研制[J]. 现代涂料与涂装, 2018, 21（7）:1-3, 12.
Yu J L, Xiong W, Li Q C, et al. Development of laser line sealant[J]. Modern Paint and Finishing, 2018, 21（7）:1-3, 12 （in Chinese）.
[4] 孙新. 激光刻型技术在化铣登机门零件上的应用[J]. 科学家, 2017, 5（12）:88-89.
Sun X. Application of laser engraving technology to milling the parts of boarding gate[J]. Scientist, 2017, 5（12）:88-89（in Chinese）.
[5] 王帅东, 邹松华, 尚洪帅, 等. 铝合金化学铣切激光刻型工艺参数研究[J]. 电镀与精饰, 2019, 41（2）:39-42.
Wang S D, Zou S H, Shang H S, et al. Study on parameters of laser engravin of aluminum alloy[J]. Plating & Finishing, 2019, 41（2）:39-42 （in Chinese）.
[6] 尚洪帅, 邹松华, 王帅东, 等.铝合金表面化铣保护胶层激光刻型的可行性分析[J]. 电镀与涂饰, 2018, 37（24）:1139-1142.
Shang H S, Zou S H, Wang S D, et al. Feasibility analysis of laser engraving of aluminum alloy surface milling protective adhesive layer[J]. Electroplating & finishing, 2018, 37（24）:1139-1142 （in Chinese）.
[7] 童康康. 航空零件化铣胶膜激光刻线的视觉检测技术研究[D]. 南京:南京航空航天大学, 2018.
Tong K K. Research on the visual inspection technology of laser line cutting of aircraft parts milling film[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2018（in Chinese）.

备注/Memo

备注/Memo:
收稿日期：2020-05-20
修回日期：2020-08-23
通信作者：殷世坤，yinshikun_12@126.com
更新日期/Last Update: 2021-03-10