[1]黄 勇,吴 宁,胡忠卿,等.5，5-二甲基乙内酰脲配位体系酸性镀镉工艺优化[J].电镀与精饰,2023,(1):85-91.[doi:10.3969/j.issn.1001-3849.2023.01.013]
　Huang Yong,Wu Ning,Hu Zhongqing,et al.Optimization of acidic cadmium plating process using 5 5-dimethylhydantoin as complexing agent[J].Plating & Finishing,2023,(1):85-91.[doi:10.3969/j.issn.1001-3849.2023.01.013]
点击复制

5，5-二甲基乙内酰脲配位体系酸性镀镉工艺优化
()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2023年1
页码:
85-91
栏目:
出版日期:
2023-01-10

文章信息/Info

Title:
Optimization of acidic cadmium plating process using 5 5-dimethylhydantoin as complexing agent
作者:
（1.航空工业洪都航空工业集团有限责任公司，江西 南昌 330096； 2.南昌航空大学 材料科学与工程学院，江西 南昌 330063）
Author(s):
（1.AVIC Jiangxi Hongdu Aviation Industry Group Company Ltd.， Nanchang 330096， China；2.School of Materials Science and Engineering， Nanchang Hangkong University， Nanchang 330063， China）

关键词:
5 ;  5- 二甲基乙内酰脲; 镀镉; 辅助络合剂; 阴极极化
Keywords:
5 ;  5-dimethylhydantoin ;  cadmium plating ;  auxiliary complexing agent ;  cathodic polarization
分类号:
TG174.451
DOI:
10.3969/j.issn.1001-3849.2023.01.013
文献标志码:
A
摘要:
针对无氰镀镉体系镀液稳定性差、镀层性能不佳等问题，选用 5 ， 5- 二甲基乙内酰脲（ DMH ）为主配位剂、 CdCl 2 为主盐研究了新型镀镉工艺。通过赫尔槽试验、阴极极化等技术研究了镉盐和 DMH 含量、辅助络合剂类型及浓度、 pH 值以及电流密度等因素的影响，优化了酸性 DMH 镀镉工艺方案。结果表明：酸性 DMH 镀镉体系中可以选择柠檬酸铵作为辅助络合剂。适当增加镉盐与 DMH 含量，可拓宽光亮电流密度范围，提高镉镀层致密性；增加柠檬酸铵浓度有利于提高镀速，但过多的镉盐和 DMH 会降低镀液稳定性。提高镀液 pH 值，镉沉积极化电位不断负移，有助于获得细致结晶，但 pH ＞ 4 后镀液易出现沉淀；此外，该体系许可的电流密度不宜超过 1.5 A/dm 2 。综合确定较佳的酸性 DMH 镀镉工艺方案为： CdCl 2 30 g/L ， DMH 60 g/L ，柠檬酸铵 40 g/L ， KCl 30 g/L ， pH=3 ，电流密度 1.0~1.5 A/dm 2 。在此体系下所得镉镀层表面结晶细致、均匀致密，晶粒尺寸为 650 nm 左右，镀层中 Cd 元素含量为 95.6 wt.% 。
Abstract:
： In order to solve the problems of bad bath stability and poor coating performance for the cyanide-free cadmium plating system ， a new cadmium plating process with 5 ， 5-dimethylhydantoin （ DMH ） as the main complexing agent and CdCl 2 as the main salt was studied. The influence of cadmium salt and DMH content ， the type and concentration of auxiliary complexing agent ， pH value ， current density was researched by Hull cell test and cathodic polarization ， and the process scheme for acidic DMH cadmium plating was optimized. The results show that ammonium citrate can be selected as auxiliary complexing agent in acidic DMH cadmium plating system. Appropriately increasing the content of cadmium salt and DMH can widen the range of bright current density and improve the compactness of cadmium coating. Increasing the concentration of ammonium citrate is beneficial to increase the plating speed. But too much cadmium salt and DMH will reduce the stability of plating bath. The polarization potential of cadmium deposition continues to move negatively as the pH value of the bath increased ， which is helpful for refining the grains. However ， the plating bath is prone to precipitation if pH value is greater than 4. In addition ， the current density allowed by this system should not exceed 1.5 A·dm -2 . The optimum process parameters of acid DMH cadmium plating are as follows ： 30 g·L -1 CdCl 2 ， 60 g·L -1 DMH ， 40 g·L -1 ammonium citrate ， 30 g·L -1 KCl ， pH = 3 and the current density of 1.0~1.5 A·dm -2 . Under this condition ， the prepared cadmium coating is fine ， uniform and dense ， the grain size is about 650 nm ， and the content of Cd element in the coating is 95.6 wt.%.

参考文献/References:



[1] 陈建锐 , 郭崇武 . 无氰酸性镀镉在航空航天零部件上的应用 [J]. 电镀与精饰 , 2017, 39(3): 23-24, 48.

[2] Bellemare J , S Laliberté-Riverin, D Ménard, et al. Coating density as the key factor behind hydrogen embrittlement of cadmium-plated 4340 steel[J]. Journal of Applied Electrochemistry, 2020, 50(10): 1045-1058.

[3] Sabelkin. V, Mall S, Misak H. Corrosion fatigue of coated AISI 4340 high strength steel with dent damage[J]. Fatigue & Fracture of Engineering Materials & Structures, 2018, 41(3): 653-662.

[4] 李博 . 无氰镀镉替代氰化镀镉工艺研究 [J]. 电镀与精饰 , 2016, 38(4): 32-35.

[5] 刘强 , 林乃明 , 沙春鹏 . 钢铁材料电镀镉的研究现状 [J]. 表面技术 , 2017, 46(1): 146-150.

[6] 郭崇武 . 新型碱性无氰镀镉工艺及其镀液与镀层性能 [J]. 电镀与涂饰 , 2019, 38(3): 97-100.

[7] 万冰华 , 杨军 , 王福新 , 等 . 无氰镀镉工艺开发研究与应用 [J]. 电镀与精饰 , 2014, 36(3): 22-25.

[8] 张玉清 , 陈同彩 , 王春霞 , 等 . 添加剂对无氰镀镉工艺性能的影响 [J]. 电镀与精饰 , 2021, 43(8): 16-20.

[9] 汤智慧 , 陆峰 , 张晓云 , 等 . 氯化铵镀镉与无氰镀镉—钛镀层性能对比研究 [J]. 装备环境工程 , 2006, 3(6): 22-24.

[10] Dolati A , Afshar A , Ghasemi H . A kinetic study on the electrodeposition of cadmium with the presence of organic agents in sulfate solutions[J]. Materials Chemistry and Physics, 2005, 94(1): 23-28.

[11] 罗龚 , 黎德育 , 袁国辉 . 乙内酰脲类化合物在无氰电镀中的应用 [J]. 电镀与涂饰 , 2016, 35(5): 268-273.

[12] Luo G, Yuan G, Ning L. Cyanide-free electrolyte for Au(III) and Au(I) electrodepositing using DMH as complexing agent[J]. RSC Advances, 2016, 6: 61341-61345.

[13] Feng Z , An M , Ren L , et al. Corrosion mechanism of nanocrystalline Zn-Ni alloys as replacement of Zn and Cd coatings in a new DMH-based bath[J]. RSC Advances, 2016, 10: 64726-64730.

[14] 黄勇 , 杜楠 , 沈宗耀 , 等 . 乙内酰脲体系无氰电镀镉工艺 [J]. 表面技术 , 2019, 48(2): 239-245.

[15] Feng Z, Liu A, Ren L, et al. Computational chemistry and electrochemical mechanism studies of auxiliary complexing agents used for Zn-Ni electroplating in the 5-5’-diethylhydanto in electrolyte[J]. Journal of the Electrochemical Society, 2016, 163(14): D764-D773.

[16] Pizzetti F, Salvietti E, Ciurlani W, et al. Cyanide-free silver electrodeposition with polyethyleneimine and 5,5-dimethylhydantoin as organic additives for an environmentally friendly formulation[J]. Journal of Electroanalytical Chemistry, 2022, 911: 116196.

[17] 方景礼 . 电镀配合物—理论与应用 [M]. 北京 : 化学工业出版社 , 2007.

[18] Zhan Z W, Zhang Q, Wang S X, et al. Effect of additives on electrodeposition of zinc from alkaline zincate solution and their synergy mechanism[J]. International Journal of Electrochemical Science, 2021, 16: 210334.

[19] 赵健伟 . 温度和电流密度对无氰镀银层微观形貌的影响 [J]. 电镀与精饰 , 2014, 36(7): 12-15, 19.

[20] 宋超 , 刘丽颖 , 肖薇 , 等 . 电流密度对无氰镀银层性能的影响 [J]. 电镀与精饰 , 2019, 41(5): 21-26.

相似文献/References:

[1]肖 涛,谢焕钧,柳 鑫,等.柠檬酸铵对5，5-二甲基乙内酰脲配位体系碱性无氰镀镉的影响[J].电镀与精饰,2023,(8):46.[doi:10.3969/j.issn.1001-3849.2023.08.008]
　Xiao Tao,Xie Huanjun,Liu Xin,et al.Effect of ammonium citrate on the non-cyanide cadmium electroplating from alkaline 5 5-dimethylhydantoin coordination system[J].Plating & Finishing,2023,(1):46.[doi:10.3969/j.issn.1001-3849.2023.08.008]

备注/Memo

备注/Memo:
收稿日期： 2022-04-07 修回日期： 2022-05-07 作者简介： 黄勇（ 1993 ―），男，硕士，工程师， email ： 627549485@qq.com * 通信作者： 王帅星， email ： wsxxpg@126.com 基金项目： 江西省自然科学基金（ 20212BAB204043 ）?/html>
更新日期/Last Update: 2023-01-03