参考文献/References:
[1] 张巧云 , 陈泽民 , 张天金 . 硫酸羟胺作为促进剂时磷化的成膜机理及所得膜层的性能 [J]. 电镀与涂饰 , 2018, 37(23): 1075-1079.
[2] 齐三 . 用于金属冷塑性变形的新型环保磷化工艺及其应用研究 [D]. 合肥 : 合肥工业大学 , 2016.
[3] 张明明 , 张涵 , 张圣麟 . 三种促进剂对磷化膜耐蚀性的影响 [J]. 腐蚀与防护 , 2019, 40(3): 200-204.
[4] Xu Y D, Qi S, Wang L, et al. Effects of hydroxylamine sulfate and sodium nitrite on microstructure and friction behavior of zinc phosphating coating on high carbon steel[J]. Chinese Journal of Chemical Physics, 2015, 28(2): 197-202.
[5] 候萍萍 . 锌钙系常温磷化液的研究 [D]. 济南 : 山东大学 , 2008.
[6] Lwolek P, Dychton K, Pytel M. Orthophosphoric acid solutions of sodium orthovanadate, sodium tungstate, and sodium molybdate as potential corrosion inhibitors of the Al 2 Cu intermetallic phase[J]. Journal of Solid State Electrochemistry, 2019(23): 3019-3029.
[7] 李现涛 , 魏雨 . 钼酸钠在常温磷化中的作用 [J]. 材料保护 , 2009, 42(2): 35-36.
[8] Kuang J. Phosphatization coating-forming mechanism based on green phosphating accelerator rare earth nitrate[J]. Advanced Materials Research, 2013(838-841): 2806-2810.
[9] 郭国才 , 莫振宇 , 吴清源 , 等 . 稀土铈对中温锌系磷化的影响 [J]. 电镀与环保 , 2018, 38(4): 37-41.
[10] 董方 , 闫瑞军 , 杨宗佳 , 等 . 稀土铈对 22MnCrNiMo 钢耐腐蚀性能的影响 [J]. 中国冶金 , 2019, 29(1): 30-37.
[11] Wang Z H, Zhang J M, Li Y, et al. Corrosion resistance enhancement of micro-arc oxidation ceramic layer by Mg-Al-Co layered double hydroxide coating[J]. Transactions of the Indian Ceramic Society, 2020, 79(2): 59-66.
[12] Hussein M A, Adesina A Y, Kumar A M, et al. Mechanical, in-vitro corrosion, and tribological characteristics of TiN coating produced by cathodic arc physical vapor deposition on Ti 20 Nb 13 Zr alloy for biomedical applications[J]. Thin Solid Films, 2020(709): 138-183.
相似文献/References:
[1]于海青*,丁春燕.中温锌钙系磷化工艺在Q345钢防腐蚀中的应用[J].电镀与精饰,2020,(5):44.[doi:10.3969/j.issn.1001-3849.2020.05.0070]
YU Haiqing*,DING Chunyan.Application of Medium Temperature Zn-Ca Phosphating Process in Corrosion Protection of Q345 Steel[J].Plating & Finishing,2020,(4):44.[doi:10.3969/j.issn.1001-3849.2020.05.0070]
[2]师 辉*,王树臣.稀土硝酸铈对油管锌钙系磷化膜形貌和性能的影响[J].电镀与精饰,2021,(2):22.[doi:10.3969/j.issn.1001-3849.2021.02.0050]
SHI Hui*,WANG Shuchen.师 辉1*,王树臣2[J].Plating & Finishing,2021,(4):22.[doi:10.3969/j.issn.1001-3849.2021.02.0050]
[3]张春丽*,吴 飞.促进剂对电气柜用冷轧板常温锌-锰系磷化膜耐蚀性的影响[J].电镀与精饰,2021,(2):16.[doi:10.3969/j.issn.1001-3849.2021.02.0040]
ZHANG Chunli*,WU Fei.张春丽1*,吴 飞2[J].Plating & Finishing,2021,(4):16.[doi:10.3969/j.issn.1001-3849.2021.02.0040]
[4]白玉伟*,陈锐.封闭处理对工程车用件磷化膜形貌和耐蚀性的影响[J].电镀与精饰,2021,(3):1.[doi:10.3969/j.issn.1001-3849.2021.03.001]
BAI Yuwei*,CHEN Rui.白玉伟*,陈锐[J].Plating & Finishing,2021,(4):1.[doi:10.3969/j.issn.1001-3849.2021.03.001]
[5]于海青*,王金涛,王 东.Q345钢表面SiC颗粒掺杂锌钙系磷化膜的制备与性能[J].电镀与精饰,2021,(7):20.[doi:10.3969/j.issn.1001-3849.2021.07.004]
YU Haiqing*,WANG Jintao,WANG Dong.Preparation and Properties of Zinc-Calcium Phosphate Film Doped with SiC Particles on Q345 Steel[J].Plating & Finishing,2021,(4):20.[doi:10.3969/j.issn.1001-3849.2021.07.004]
[6]孙 伟*,许 霞,张伟华.建筑结构钢锌钙系磷化膜的结构与耐蚀性研究[J].电镀与精饰,2022,(10):60.[doi:10.3969/j.issn.1001-3849.2022.10.010]
SUN Wei*,XU Xia,ZHANG Weihua.Investigation on Structure and Corrosion Resistance of Zinc-Calcium Phosphating Films on Building Structural Steel[J].Plating & Finishing,2022,(4):60.[doi:10.3969/j.issn.1001-3849.2022.10.010]
[7]刘 慧,王春霞*,郭浩男.促进剂对锌镍系磷化膜表面形貌及耐蚀性的影响[J].电镀与精饰,2024,(1):28.[doi:10.3969/j.issn.1001-3849.2024.01.005]
Liu Hui,Wang Chunxia*,Guo Haonan.The effect of accelerators on the surface morphology and corrosion resistance of zinc nickel phosphating films[J].Plating & Finishing,2024,(4):28.[doi:10.3969/j.issn.1001-3849.2024.01.005]