[1]祁海洋*,王海燕,蒋成博.铝合金镀银过渡工艺研究[J].电镀与精饰,2023,(10):78-82.[doi:10.3969/j.issn.1001-3849.2023.10.013]
　Qi Haiyang*,Wang Haiyan,Jiang Chengbo.Study on transition process of silver plating on aluminum alloy[J].Plating & Finishing,2023,(10):78-82.[doi:10.3969/j.issn.1001-3849.2023.10.013]
点击复制

铝合金镀银过渡工艺研究
()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2023年10
页码:
78-82
栏目:
出版日期:
2023-10-15

文章信息/Info

Title:
Study on transition process of silver plating on aluminum alloy
作者:
（平高集团有限公司，河南 平顶山 467001）
Author(s):
（Pinggao Group Co.， Ltd.， Pingdingshan 467001， China）
关键词:
镀银层; 耐腐蚀性; 盐雾实验; 结合力
Keywords:
silver coating ;  corrosion resistance ;  salt spray test ;  adhesion
分类号:
TQ153.2
DOI:
10.3969/j.issn.1001-3849.2023.10.013
文献标志码:
A
摘要:
铝合金镀银层在长期使用过程中受环境影响易出现腐蚀起泡等问题。针对铝合金镀银的中间镀铜过渡工艺进行研究，对比了 5 种不同镀铜工艺下的镀层性能，并且对氰化镀铜和氰化光亮镀铜在不同时间配比下对镀银层性能的影响进行实验。结果表明：铝合金镀银工艺中引入氰化光亮镀铜，在氰化镀铜时间保证 5 min 以上再进行氰化光亮镀铜时，与单纯使用氰化镀铜 10 min 的工艺相比，可得到结晶更致密、结合力良好、孔隙率明显降低、中性盐雾实验耐蚀性大幅度提高的镀层。
Abstract:
： The corrosion and bubbling of silver plating on aluminum alloy are easy to occur during the long-term use. In this paper ， the intermediate copper plating process for silver plating on aluminum alloy was studied ， the properties of the coatings under 5 different copper plating processes were compared ， and the effects of different time ratios of cyanide copper plating and bright cyanide copper plating on the properties of silver coating were tested. The results showed that when the bright copper plating was introduced into silver plating process on aluminum alloy ， and the bright copper plating was carried out after the time of copper plating was guaranteed to be more than 5 min ， it was better than the process of copper plating by cyanide for 10 min. The coating with denser crystal ， better adhesion ， lower porosity and higher corrosion resistance in neutral salt spray test can be obtained.

参考文献/References:



[1] 凌颖 , 赵莉华 , 林显 , 等 . 高压隔离开关电触头性能改善探讨 [J]. 高压电器 , 2010, 46(8): 101-105.

[2] 徐曦 , 陈阳 , 邓乐萍 . 薄层镀硬银工艺在气体绝缘金属封闭开关设备上的应用性研究 [J]. 电气技术 , 2020, (8): 134-137.

[3] 陈俊寰 , 夏延秋 , 曹正锋 . 铜基银镀层的导电性及摩擦磨损性能 [J]. 材料保护 , 2016, 49(10): 1-4.

[4] 徐曦 , 邓乐萍 . 一起铝合金镀银起泡质量问题的研究探讨 [J]. 电镀与精饰 , 2021, 43(4): 44-47.

[5] 韩力 . 铝及其合金高附着力镀银工艺探讨 [J]. 电镀与精饰 , 2012, 34(7): 31-34.

[6] 李达 . 铝合金刷镀银前处理工艺对镀层性能的影响 [D]. 沈阳 : 沈阳工业大学 , 2017.

[7] 曾领才 , 文伟 , 谢辉 . 铝及铝合金电镀前处理工艺的改进 [J]. 电镀与涂饰 , 2012, 31(3): 15-17.

[8] 李家柱 . 氰化物光亮镀铜工艺的研究 [J]. 电镀与涂饰 , 2003, 22(3): 35-38.

[9] 李彭瑞 , 任春江 , 章军云 , 等 . 电镀参数对电镀镍层性能的影响 [J]. 电镀与精饰 , 2022, 44(2): 26-29.

[10] 傅佳夏 . 酸性光亮镀铜工艺研究 [D]. 厦门 : 厦门大学 ,2019.

相似文献/References:

[1]陈 伟*,张 苗,范成荣,等.锌铬涂层表面有机硅基封闭剂涂覆工艺研究[J].电镀与精饰,2019,(8):33.[doi:10.3969/j.issn.1001-3849.2019.08.008]
　CHEN Wei*,ZHANG Miao,FAN Chengrong,et al.Study on Sealing Process of Organosilicon-Based Sealant on Surface of Zinc-Chromium Coating[J].Plating & Finishing,2019,(10):33.[doi:10.3969/j.issn.1001-3849.2019.08.008]
[2]高心心,梁晓明*,刘保成,等.新型异种钢接头组织和耐腐蚀性能研究[J].电镀与精饰,2019,(9):13.[doi:10.3969/j.issn.1001-3849.2019.09.003]
　GAO Xinxin,LIANG Xiaoming*,LIU Baocheng,et al.Microstructure and Corrosion Resistance of New Dissimilar Steel Welded Joint[J].Plating & Finishing,2019,(10):13.[doi:10.3969/j.issn.1001-3849.2019.09.003]
[3]肖亚梅*,孙彩霞,刘井坤,等.Cu/Ni复合仿生超滑表面耐蚀性能研究[J].电镀与精饰,2020,(1):7.[doi:10.3969/j.issn.1001-3849.2020.01.002]
　XIAO Yamei*,SUN Caixia,LIU Jingkun,et al.Research on the Corrosion Resistance of Cu/Ni Composite Bionic Super-Smooth Surface[J].Plating & Finishing,2020,(10):7.[doi:10.3969/j.issn.1001-3849.2020.01.002]
[4]柳小祥,范文俊,徐招,等.316L不锈钢金属双极板的电解抛光工艺[J].电镀与精饰,2020,(3):6.[doi:10.3969/j.issn.1001-3849.2020.03.002]
　LIU Xiaoxiang,FAN Wenjun,XU Zhao,et al.Electro-polishing of 316L Stainless Steel Bipolar Plate[J].Plating & Finishing,2020,(10):6.[doi:10.3969/j.issn.1001-3849.2020.03.002]
[5]范文俊,崔红兵,王 萌,等.从三价铬溶液电沉积非晶Cr-C镀层及其性能研究[J].电镀与精饰,2020,(12):37.[doi:10.3969/j.issn.1001-3849.2020.12.0080]
　FAN Wenjun,CUI Hongbing,WANG Meng,et al.Preparation and Performance Study of Amorphous Cr-C Coating Electrodeposited from Trivalent Chromium Solution[J].Plating & Finishing,2020,(10):37.[doi:10.3969/j.issn.1001-3849.2020.12.0080]
[6]周艳丽*.5052铝合金草酸阳极氧化和铬酸阳极氧化工艺研究[J].电镀与精饰,2021,(2):34.[doi:10.3969/j.issn.1001-3849.2021.02.0070]
　ZHOU Yanli*.周艳丽*[J].Plating & Finishing,2021,(10):34.[doi:10.3969/j.issn.1001-3849.2021.02.0070]
[7]孟香茗,宋振兴*,王占学,等.提拉法制备氧化锌纳米颗粒电极及其耐腐蚀性能[J].电镀与精饰,2021,(5):10.[doi:10.3969/j.issn.1001-3849.2021.05.002]
　MENG Xiangming,SONG Zhenxing*,WANG Zhanxue,et al.Preparation of ZnO Nanoparticle Electrode by Dip-Coating Method and Its Corrosion Resistance[J].Plating & Finishing,2021,(10):10.[doi:10.3969/j.issn.1001-3849.2021.05.002]
[8]李 敏,张胜健*,曹秋菊.桐油覆膜Ni-Co-SiO2纳米复合涂层的制备及防腐性能研究[J].电镀与精饰,2023,(1):8.[doi:10.3969/j.issn.1001-3849.2023.01.002]
　Li Min,Zhang Shengjian*,Cao Qiuju.Preparation and corrosion resistance of tung oil coated Ni-Co-SiO 2 nanocomposite coatings[J].Plating & Finishing,2023,(10):8.[doi:10.3969/j.issn.1001-3849.2023.01.002]
[9]张 玺 *,韩 峰,闫基森,等.ZK60镁合金激光表面熔凝处理及性能研究[J].电镀与精饰,2023,(7):61.[doi:10.3969/j.issn.1001-3849.2023.07.008]
　Zhang Xi *,Han feng,Yan Jisen,et al.Study on laser surface melting treatment and properties of ZK60 magnesium alloy[J].Plating & Finishing,2023,(10):61.[doi:10.3969/j.issn.1001-3849.2023.07.008]
[10]秦 兵,赵 俊,陈鼎彪,等. 电缆铜线材高速电镀银技术 [J].电镀与精饰,2023,(8):87.[doi:10.3969/j.issn.1001-3849.2023.08.014]
　Qin Bing,Zhao Jun,Chen Dingbiao,et al.High speed silver electroplating technology for cable copper wire[J].Plating & Finishing,2023,(10):87.[doi:10.3969/j.issn.1001-3849.2023.08.014]
[11]张红军*,马迎春,李晓征,等.doi: 10.3969/j.issn.1001-3849.2025.05.014碱洗时间对铝合金基体和镀银层耐腐蚀性能的影响[J].电镀与精饰,2025,(05):95.
　Zhang Hongjun*,Ma Yingchun,Li Xiaozheng,et al.The effect of alkaline washing time on corrosion resistance of aluminum alloy matrix and silver coating[J].Plating & Finishing,2025,(10):95.

备注/Memo

备注/Memo:
收稿日期： 2023-01-09 修回日期： 2023-02-18 * 通信作者： 祁海洋（ 1987 —），男，硕士研究生，高级工程师， email ： haiyang371243612@163.com 基金项目： 国家电网有限公司总部科技项目（ 5400-202121151A-0-0-00 ）
更新日期/Last Update: 2023-10-07