Ren Yi,Zhang Yin,Zhou Yadong*,et al.Design of filament-type auxiliary ion source and study on its improvement of thin film parameters[J].Plating & Finishing,2024,(7):99-106.[doi:10.3969/j.issn.1001-3849.2024.07.015]
灯丝型辅助离子源的设计及其对薄膜参数的改善研究
- Title:
- Design of filament-type auxiliary ion source and study on its improvement of thin film parameters
- 关键词:
- 离子源; 结构设计; 离子束辅助沉积（ IBAD ）; 光学薄膜
- 分类号:
- O484
- 文献标志码:
- A
- 摘要:
- 为了以较低成本的技术提高磁控溅射沉积薄膜的纯度、致密性和均匀性，设计出一种可以活化氧气的双腔室直流加热灯丝型辅助离子源。通过实验改变辅助离子源的工作参数，探究其对磁控溅射镀膜机所沉积薄膜的光学参数的影响。通过对比不同工艺条件下所沉积薄膜的透过率、折射率、基板上膜层不同位置的相对厚度，最终证明设计提出的辅助离子源可以一定程度改善 Ta2O5和 SiO2单层镀膜的透过率、折射率以及均匀性，提升了原磁控溅射镀膜机的镀膜质量和有效镀膜面积，对提高镀膜生产效率具有一定指导意义。
- Abstract:
- ： In order to improve the purity ， compactness and uniformity of magnetron sputtering deposited films at a lower cost ， a dual-chamber DC heating filament auxiliary ion source was designed which can activate oxygen. The working parameters of the auxiliary ion source were changed in the experiment to explore their influence on the optical parameters of the films deposited by magnetron sputtering coater. By comparing the transmittance ， refractive index and relative thickness of the films which was deposited under different processing conditions ， it is finally proved that the auxiliary ion source designed in this work can improve the transmittance ， refractive index and uniformity of the single-layer films of Ta2O5 and SiO2 which was coated in this experiment. Thus ， the coating quality and effective coating area of the original magnetron sputtering coating machine are improved ， and it does have certain practical significance for improving the efficiency of the coating.
参考文献/References:
[1] Utke I, Michler J, Winkler R, et al. Mechanical properties of 3D nanostructures obtained by focused electron/ion beam-induced deposition: A review[J]. Micromachines, 2020, 11(4): 397-405.
[2] Brault P, Thomann A L, Cavarroc M. Theory and molecular simulations of plasma sputtering, transport and deposition processes[J]. The European Physical Journal D, 2023, 77(2): 19-26.
[3] Fan B. State of the art of PVD coating equipment for mass production in Asia[C]//Whistle L: Proceedings of the optical inter ference coatings conference (OIC) 2022. Columbia: Optica Publishing Group, 2022..
[4] Li X, Yang W, Xu M, et al. Theoretical basis and performance research on advanced non-contacting ion beam manufacturing process for optical materials[C]. Journal of Physics: Conference Series. IOP Publishing, 2023, 2478(12): 122011.
[5] Abegunde O O, Akinlabi E T, Oladijo O P, et al. Overview of thin film deposition techniques[J]. AIMS Materials Science, 2019, 6(2): 174-199.
[6] 李晓刚 , 黎子辉 , 叶俊文 . 基于文献数据可视化的真空镀膜技术研究与应用分析 [J]. 真空科学与技术学报 , 2022(5): 1-16.
[7] Cha J H, Kim S W, Lee H J. A study on beam extraction characteristics of RF and DC filament ion source for high current ion implanters[J]. Applied Science and Convergence Technology, 2021, 30(3): 92-94.
[8] Junge F, Auge M, Hofs?ss H. Sputter hot filament hollow cathode ion source and its application to ultra-low energy ion implantation in 2d materials[J]. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2022, 510: 63-68.
[9] Pacek A, Pieńkos T, Czarnacki M, et al. Improved three‐filament thermal ionization mass spectrometry ion source for isotope ratio determination of two samples[J]. Rapid Communications in Mass Spectrometry, 2020, 34(8): e8671.
[10] Prevost D, Jayamanna K, Graham L, et al. New ion source filament for prolonged ion source operation on a medical cyclotron[J]. Instruments, 2019, 3(1): 5-13.
[11] Vyas R, Herr P J, Aloui T, et al. Comparison of thermionic filament and carbon nanotube field emitter-based electron ionization sources in cycloidal coded aperture mass analyzers[J]. International Journal of Mass Spectrometry, 2020, 457: 116415.
[12] Jilani A, Abdel-Wahab M S, Hammad A H. Advance deposition techniques for thin film and coating[J]. Modern Technologies for Creating the Thin-film Systems and Coatings, 2017, 2(3): 137-149.
[13] 唐晋发 , 顾培夫 , 刘旭 , 等 . 现代光学薄膜技术 [M]. 浙江 : 浙江大学出版社 , 2006.
[14] 李杰 , 董攀 , 王韬 , 等 . 磁场调控型离子源的设计与实验 [J]. 强激光与粒子束 , 2022, 34(7): 5-9.
[15] Goncharov A A, Litovko I V, Dobrovolsky A N, et al. Novel modification of Hall-type ion source (study and the first results)[J]. Review of Scientific Instruments, 2016, 87(2): 145-151.
[16] Bernstein J, Gerlach J W, Finzel A, et al. Ion beam sputter deposition of SiO2 thin films using oxygen ions[J]. The European Physical Journal B, 2022, 95(3): 39-45.
[17] Park Y J, Sobahan K M A, Hwangbo C K. Optical and structural properties of Fe2O3 thin films prepared by ion-beam assisted deposition[J]. Surfaceand Coating Technology, 2009, 203(17/18): 2646-2650.
[18] Song S, Cai S, Han D, et al. Tantalum oxide and silicon oxide mixture coatings deposited using microwave plasma assisted co-sputtering for optical mirror coatings in gravitational wave detectors[J]. Appllied Optics, 2023, 62(7): B73-B78.
[19] 付秀华 , 王一博 , 潘永刚 , 等 . 离子束刻蚀改善膜厚均匀性的研究 [J]. 光子学报 , 2022, 51(9): 59-70.
[20] 张静 , 刘海成 , 付秀华 , 等 . 离子束刻蚀改善光通信滤光膜 [J]. 光子学报 , 2022(12): 6-10.
备注/Memo
收稿日期： 2024-01-11 修回日期： 2024-01-21 作者简介： 任翼（ 1998 ―），男，硕士研究生，研究方向为磁控溅射薄膜沉积， email ： ry_2968000688@163.com * 通信作者： 周亚东， email ： zyadong2013@cjlu.edu.cn 基金项目： 国家科学自然基金项目 - 表面等离激元增强效应模型建立及验证研究（ 22204154 ）