[1]储小鹏,李艳香,刘建新,等.doi: 10.3969/j.issn.1001-3849.2025.07.0014离子液体体系中电镀技术研究进展[J].电镀与精饰,2025,(07):89-99.
 Lai Xinqiao,Luo Youbin,Li Wangliang*.Research progress of electroplating technology in ionic liquid system Chu Xiaopeng1,2Li Yanxiang1,3, Liu Jianxin2, Liu Ninghua4,[J].Plating & Finishing,2025,(07):89-99.
点击复制

doi: 10.3969/j.issn.1001-3849.2025.07.0014离子液体体系中电镀技术研究进展()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2025年07
页码:
89-99
栏目:
出版日期:
2025-07-31

文章信息/Info

Title:
Research progress of electroplating technology in ionic liquid system Chu Xiaopeng1,2Li Yanxiang1,3, Liu Jianxin2, Liu Ninghua4,
作者:
储小鹏12李艳香13刘建新2刘宁华4赖心翘4罗有斌4李望良13*
(1. 中国科学院过程工程研究所 中国科学院绿色过程与工程重点实验室, 北京100190; 2. 中国石油大学(北京)
Author(s):
Lai Xinqiao4 Luo Youbin4 Li Wangliang13*
(1. CAS Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China; 2. College of Mechanical and Transportation Engineering, China University of Petroleum, Beijing 102249, China; 3. University of Chinese Academy of Sciences, Beijing 100049, China; 4 Guangzhou Sanfu New Materials Technology Co., Ltd., Guangzhou 510555, China)
关键词:
电镀添加剂离子液体绿色溶剂电化学窗口
Keywords:
electroplate additive ionic liquids green solvent electrochemical window
分类号:
TQ153
文献标志码:
A
摘要:
离子液体电镀技术作为一种新兴电镀技术拥有光明的发展前景。本文介绍了离子液体作为镀液的优异性能,概述了温度、电流密度、电流类型、水氧含量、添加剂等沉积条件对沉积物形貌、组成、微观结构和性质的影响规律。最后,总结了目前离子液体电镀面临的挑战和在未来的发展方向。
Abstract:
Ionic liquid electroplating technology as a new electroplating technology has a bright future. This paper introduces the excellent properties of ionic liquid as plating solution, and summarizes the influence of deposition conditions such as temperature, current density, current type, water oxygen content and additives on the morphology, composition, microstructure andproperties of the sediments. Finally, the current challenges and future development directions of ionic liquid electroplating are summarized

参考文献/References:

[1].Lebedeva O, Kultin D, Kustov L. Electrochemical synthesis of unique nanomaterials in ionic liquids[J]. Nanomaterials, 2021, 11(12): 3270.
[2].钟声, 宋婷, 张钰瑞, 等. 离子液体电沉积[J]. 中国科学: 化学, 2023, 53(10): 2008-2026.
[3].Zheng Y, Zhou X, Luo Y, et al. Electrodeposition of nickel in air-stableand water-stable 1-butyl-3-methylimidazolium dibutylphosphate ionic liquid[J]. RSC Advances, 2020, 10(28): 16576-16583.
[4].Sharma P, Sharma S, Kumar H. Introduction to ionic liquids, Applications and micellization behaviour in presence of different additives[J]. Journal of Molecular Liquids, 2023(12): 123447.
[5].Xu C, Cheng Z. Thermal stability of ionic liquids: Current status and prospects for future development[J]. Processes, 2021, 9(2): 337.
[6].Salgado J, Villanueva M, Parajó J J, et al. Long-term thermal stability of five imidazolium ionic liquids[J]. The Journal of Chemical Thermodynamics, 2013, 65: 184-190.
[7].齐灿灿, 华一新, 徐存英, 等. 离子液体电化学窗口的研究进展[J]. 过程工程学报, 2014, 14(4): 694-707.
[8].Hayyan M, Mjalli F S, Hashim M A, et al. Investigating the electrochemical windows of ionic liquids[J]. Journal of Industrial and Engineering Chemistry, 2013, 19(1): 106-112.
[9].Piatti E, Guglielmero L, Tofani G, et al. Ionic liquids for electrochemical applications: Correlation between molecular structure and electrochemical stability window[J]. Journal of Molecular Liquids, 2022, 364: 120001.
[10].Protsenko V S,Kityk A A, Shaiderov D A, et al. Effect of water content on physicochemical properties and electro -chemical behavior of ionic liquids containing choline chloride, ethylene glycol and hydrated nickel chloride[J]. Journal of Molecular Liquids, 2015, 212: 716-722.
[11].Maniam K K, Paul S. Progress in electrodeposition of zinc and zinc nickel alloys using ionic liquids[J]. Applied Sciences, 2020, 10(15): 5321.
[12].B?ttcher R, Valitova A, Ispas A, et al. Electrodeposition of aluminium from ionic liquids on high strength steel[J]. Transactions of the IMF, 2019, 97(2): 82-88.
[13].Zhang Q, Wang Q, Zhang S, et al. Effect of nicotinamide on electrodeposition of Al from aluminium chloride (AlCl3)-1-butyl-3-methylimidazolium chloride [Bmim] Cl ionic liquids[J]. Journal of Solid State Electrochemistry, 2014, 18: 257-267.
[14].Berretti E, Giaccherini A, Martinuzzi S M, et al. Aluminium electrodeposition from ionic liquid: Effect of deposition temperature and sonication[J]. Materials, 2016, 9(9): 719.
[15].Wang Q, Zhang Q, Chen B, et al. Electrodeposition of bright Al coatings from 1-butyl-3-methylimidazolium chloroaluminate ionic liquids with specific additives[J]. Journal of the Electrochemical Society, 2015, 162(8): D320.
[16].Sano H, Kitta M, Shikano M, et al. Effect of temperature on Li electrodeposition behavior in room-temperature ionic liquids comprising quaternary ammonium cation[J]. Journal of the Electrochemical Society, 2019, 166(13): A2973.
[17].徐丽, 离子液体溶液的电导率研究[D]. 天津: 天津大学, 2018.
[18].张锁江, 吕兴梅. 离子液体:从基础研究到工业应用[M]. 科学出版社, 2006: 38-56.
[19].Mohammadpour Z, Zare H R. Improving the corrosion resistance of the nickeltungsten alloy by optimization of the electroplating conditions[J]. Transactions of the Indian Institute of Metals, 2020, 73: 937-944.
[20].Asano K, Tang H, Chen C Y, et al. Promoted bending strength in micro-cantilevers composed of nanograined gold toward MEMS applications[J]. Microelectronic Engineering, 2018, 196: 20-24.
[21].Yamamoto T, Igawa K, Tang H, et al. Effects of current density on mechanical properties of electroplated nickel with high speed sulfamate bath[J]. Microelectronic Engineering, 2019, 213: 18-23.
[22].Maniam K K, Paul S. A review on the electrodeposition of aluminum and aluminum alloys in ionic liquids[J]. Coatings, 2021, 11(1): 80.
[23].Chang J K, Chen S Y, Tsai W T, et al. Electrodeposition of aluminum on magnesium alloy in aluminum chloride AlCl3-EMIC ionic liquid and its corrosion behavior[J]. Electrochemistry Communications, 2007, 9(7): 1602-1606.
[24].Farisi M S, Hertel S, Wiemer M, et al. Aluminum patterned electroplating from AlCl3-[Emim]Cl ionic liquid towards microsystems application[J]. Micromachines, 2018, 9(11): 589.
[25].Wang Q, Zhang Q, Chen B, et al. Electrodeposition of bright Al coatings from 1-butyl-3-methylimidazolium chloroaluminate ionic liquids with specific additives[J]. Journal of the Electrochemical Society, 2015, 162(8): D320.
[26].She H H, Huang P C, Tsai L C, et al. Effects of plating parameters on the Ni-P-Al2O3 composite coatings prepared by pulse and direct current plating[J]. Surface and Coatings Technology, 2013, 235: 529-535.
[27].Dezfuli S M, Sabzi M. Deposition of ceramic nanocomposite coatings by electroplating process: A review of layer-deposition mechanisms and effective parameters on the formation of the coating[J]. Ceramics International, 2019, 45(17): 21835-21842.
[28].Alshater A F, Hakeem A S, Saadi O W, et al. A correlative study amongst overlay nanostructure and emanating corrosion behavior of pulse-electroplated nanocrystalline zinc on carbon steel[J]. Applied Nanoscience, 2019, 9: 289-304.
[29].Huang B C, Yang C H, Lee C Y, et al. Effect of pulse-reverse plating on copper: Thermal mechanical properties and microstructure relationship[J]. Microelectronics Reliability, 2019, 96: 71-77.
[30].Xu F, Jiang L, Wu J, et al. Effects of pulsed-electrodeposition parameters on the property of aluminum film onto sintered NdFeB magnets[J]. Electrochem, 2017, 12: 517-528.
[31].王晓静, 牟天成. 离子液体的吸水性研究进展[J]. 科学通报, 2015, 60(26): 2516-2524.
[32].郭艳东, 游琳琳, 张晓春. 水对离子液体微观结构和传输性能的影响[J]. 过程工程学报, 2021, 21(4): 431-439.
[33].杨志, 闫瑞景, 梁镇海. 离子液体中脉冲电镀铝[J]. 材料保护, 2013, 46(1): 31-34.
[34].Giridhar P, El Abedin S Z, Endres F. Electrodeposition of Al from 1-butyl-1-methylpyrrolidinium chloride/AlCl3 and mixtures with 1-ethyl-3-methylimidazolium chloride/AlCl 3 [J]. Electrochimica Acta, 2012, 70: 210-214.
[35].Bakkar A, Neubert V. A new method for practical electrodeposition of aluminium from ionic liquids[J]. Electrochemistry Communications, 2015, 51: 113-116.
[36].Singh C, Tiwari S K, Singh R. Development of corrosion-resistant electroplating on AZ91 Mg alloy by employing air and water-stable eutectic based ionic liquid bath[J]. Surface and Coatings Technology, 2021, 428: 127881.
[37].Cui T, Lahiri A, Carstens T, et al. Influence of water on the electrified ionic liquid-solid interface: a direct observation of the transition from a multilayered structure to a double-layer structure[J]. The Journal of Physical Chemistry C, 2016, 120(17): 9341-9349.
[38].Ibrahim S, Bakkar A, Ahmed E, et al. Effect of additives and current mode on zinc electrodeposition from deep eutectic ionic liquids[J]. Electrochimica Acta, 2016, 191: 724-732.
[39].Wang Q, Zhang Q, Chen B, et al. Electrodeposition of bright Al coatings from 1-butyl-3-methylimidazolium chloroaluminate ionic liquids with specific additives[J]. Journal of the Electrochemical Society, 2015, 162(8): D320.
[40].Liu Z, Zein E, Abedin S, Borisenko N, et al. Influence of an additive on zinc electrodeposition in the ionic liquid 1-ethyl-3-methylimidazolium trifluoromethylsulfonate[J]. Ch-emElectroChem, 2015, 2(8): 1159-1163.
[41].Guinea E, Salicio A, Iriarte A, et al. Robust aluminum electrodeposition from ionic liquid electrolytes containing light aromatic naphta as additive[J]. Chemistry Open, 2019, 8(8): 1094-1099.
[42].Greer A J, Jacquemin J, Hardacre C. Industrial applications of ionic liquids[J]. Molecules, 2020, 25(21): 5207.
[43].Wang Q, Zhang Q, Lu X, et al. Electrodeposition of Al from chloroaluminate ionic liquids with different cations[J]. Ionics, 2017, 23: 2449-2455.
[44].范杰平, 曹婧, 孔涛, 等. 离子液体的合成纯化及回收方法研究进展[J]. 南昌大学学报: 工科版, 2009, 31(4): 334-338.
[45].卞洁鹏, 杨庆浩. 离子液体的合成与纯化方法研究进展[J]. 材料导报, 2018, 32(11): 1813-1819.
[46].聂毅, 王均凤, 张振磊, 等. 离子液体回收循环利用的研究进展与趋势[J]. 化工进展, 2019, 38(1): 100-110.
[47].Maniam K K, Paul S. A review on the electrodeposition of aluminum and aluminum alloys in ionic liquids[J]. Coatings, 2021, 11(1): 80.
[48].Li F, Xu X, Cao C, et al. Application and mechanism analysis of functionalized ionic liquids in copper regeneration from electroplating sludge[J]. Journal of Cleaner Production, 2023, 397: 136608.
[49].Zheng J, Jiang M, Qiao L, et al. Surface modification of spherical NdFeB magnetic powders by a fluid-bed nickel electrodeposition[J]. Materials Letters, 2008, 62(28): 4407-4409.
[50].Xu F, Jiang L, Wu J, et al. Effects of pulsed-electrodeposition parameters on the property of aluminum film onto sintered NdFeB magnets[J]. Electrochemistry, 2017, 12: 517-528.
[51].Zhang P, Liu Q, Huang J, et al. Phosphate conversion of electroplated Ni coatings on NdFeB magnets improving the anticorrosion property[J]. Journal of Alloys and Com-pounds, 2022, 922: 166206.
[52].Yang X, Li Q, Zhang S, et al. Microstructure characteristic and excellent corrosion protection properties of sealed Zn-TiO2 composite coating for sintered NdFeB magnet[J]. Journal of Alloys and Compounds, 2010, 495(1): 189-195.
[53].Qiao Y Z, Gang L I, Zhuang L, et al. Influence of the electroplating pretreatment on corrosion mechanism of NdFeB magnets[J]. Journal of Rare Earths, 2016, 34(2): 152-157.
[54].Chen J, Xu B, Ling G. Amorphous Al-Mn coating on NdFeB magnets: Electrodeposition from AlCl3-EMIC-MnCl2 ionic liquid and its corrosion behavior[J]. Materials Chemistry and Physics, 2012, 134(2/3): 1067-1071.
[55].Xu F, Jiang L, Wu J, et al. Effects of pulsed-electrodeposition parameters on the property of aluminum film onto sintered NdFeB magnets[J]. Electrochem, 2017, 12: 517-528.
[56].Wang X, Shen L, Qiu M, et al. Effect of friction on pre-paration of NdFeB nickel coating by jet electrodeposi-tion[J]. International Journal of Electrochemical Science, 2018, 13(8): 7706-7717.
[57].Brown L C, Hogg J M, Swad?ba-Kwa?ny M. Lewis acidic ionic liquids[J]. Ionic Liquids II, 2018: 185-224.
[58].Singh T, Kumar A. Self-aggregation of ionic liquids in aqueous media: a thermodynamic study[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2008, 318(3): 263-268.
[59].Seddon K R, Stark A, Torres M J. Influence of chloride, water, and organic solvents on the physical properties of ionic liquids[J]. Pure and Applied Chemistry, 2000, 72(12): 2275-2287.
[60].Maniam K K, Paul S. A review on the electrodeposition of aluminum and aluminum alloys in ionic liquids[J]. Coatings, 2021, 11(1): 80.
[61].Spohr H V, Patey G N. The influence of water on the structural and transport properties of model ionic liquids[J]. The Journal of Chemical Physics, 2010, 132(23): 185-196.
[62].Ramaprakash M, Mohan S, Rajasekaran N. Pulse and pulse reverse electrodeposition of cubic, tetragonal and its mixed phase of Ni-W alloys for corrosion applications[J]. Journal of the Electrochemical Society, 2019, 166(6): 145.
[63].Du C, Zhao B, Chen X B, et al. Effect of water presence on choline chloride-urea ionic liquid and coating platings from the hydrated ionic liquid[J]. Scientific Reports, 2016, 6(1): 29225.
[64].Liu Z, Quan J P. Study on electric conductivity of quaternary ammonium ionic liquids. Russian Journal of Physical Chemistry, 2023(10): 1466-1474.

相似文献/References:

[1]王晓丽,顾 海,周昭昌,等.铜镀层工艺参数优化的正交实验研究[J].电镀与精饰,2018,(12):19.[doi:10.3969/j.issn.1001?3849.2018.12.005]
 WANG Xiaoli,GU Hai,ZHOU Zhaochang,et al.Orthogonal Experimental Research on Optimization of Process Parameters of Copper Electroplating[J].Plating & Finishing,2018,(07):19.[doi:10.3969/j.issn.1001?3849.2018.12.005]
[2]王 秀.电镀智能监控系统设计[J].电镀与精饰,2018,(12):30.[doi:10.3969/j.issn.1001?3849.2018.12.007]
 WANG Xiu.Design of Intelligent Electroplating Monitoring System[J].Plating & Finishing,2018,(07):30.[doi:10.3969/j.issn.1001?3849.2018.12.007]
[3]刘 玮,安成强*,郝建军,等.钼酸钠对AZ91D镁合金钒/锆复合转化膜性能的影响[J].电镀与精饰,2019,(8):10.[doi:10.3969/j.issn.1001-3849.2019.08.003]
 LIU Wei,AN Chengqiang*,HAO Jianjun,et al.Effect of Na2MoO4 on Properties of Vanadium/Zirconate Conversion Coating on AZ91D Magnesium Alloy[J].Plating & Finishing,2019,(07):10.[doi:10.3969/j.issn.1001-3849.2019.08.003]
[4]徐振邦,陆振涛,柯喜敏,等.铝合金电子元器件的表面涂层与耐蚀性能研究[J].电镀与精饰,2019,(10):9.[doi:10.3969/j.issn.1001-3849.2019.10.003]
 XU Zhenbang,LU Zhentao,KE Ximin,et al.Study on Surface Coating and Corrosion Resistance of Aluminum Alloy Electronic Components[J].Plating & Finishing,2019,(07):9.[doi:10.3969/j.issn.1001-3849.2019.10.003]
[5]王明亮,杨海燕,李 明,等.电镀硬金的研究现状[J].电镀与精饰,2019,(11):26.[doi:10.3969/j.issn.1001-3849.2019.11.007]
 WANG Mingliang,YANG Haiyan,LI Ming,et al.Research Progress on Hard Gold Electrodeposition[J].Plating & Finishing,2019,(07):26.[doi:10.3969/j.issn.1001-3849.2019.11.007]
[6]刘 光*,文 桦,徐启杰.基于TIA和PLC的全自动ABS塑料电镀控制系统设计[J].电镀与精饰,2020,(2):33.[doi:10.3969/j.issn.1001-3849.2020.02.007]
 LIU Guang*,WEN Hua,XU Qijie.Design of Automatic Control System for ABS Plastics Electroplating Line Based on TIA and PLC[J].Plating & Finishing,2020,(07):33.[doi:10.3969/j.issn.1001-3849.2020.02.007]
[7]宋青员,何荣祥,陈朝会,等.高度梯度微纳结构的自动化电镀制备方法[J].电镀与精饰,2020,(7):23.[doi:10.3969/j.issn.1001-3849.2020.07.0050]
 SONG Qingyuan,HE Rongxiang,CHEN Chaohui,et al.Automated Electroplating for Gradient Height Micro-nano Structures Fabricating[J].Plating & Finishing,2020,(07):23.[doi:10.3969/j.issn.1001-3849.2020.07.0050]
[8]雷翔霄?,徐立娟,唐春霞.基于神经网络PID算法的镀液温度控制系统[J].电镀与精饰,2020,(8):39.[doi:10.3969/j.issn.1001-3849.2020.08.0080]
 LEI Xiangxiao,XU Lijuan,et al.Bath Temperature Control System Based on Neural Network PID[J].Plating & Finishing,2020,(07):39.[doi:10.3969/j.issn.1001-3849.2020.08.0080]
[9]范文俊,崔红兵,王 萌,等.从三价铬溶液电沉积非晶Cr-C镀层及其性能研究[J].电镀与精饰,2020,(12):37.[doi:10.3969/j.issn.1001-3849.2020.12.0080]
 FAN Wenjun,CUI Hongbing,WANG Meng,et al.Preparation and Performance Study of Amorphous Cr-C Coating Electrodeposited from Trivalent Chromium Solution[J].Plating & Finishing,2020,(07):37.[doi:10.3969/j.issn.1001-3849.2020.12.0080]
[10]薛迪杰*,陈 军,陈景召.基于ZigBee的电镀生产线温度集中监控系统[J].电镀与精饰,2021,(1):31.[doi:10.3969/j.issn.1001-3849.2021.01.0060]
 XUE Dijie*,CHEN Jun,CHEN Jingzhao,et al.Temperature Centralized Monitoring System of Electroplating Production Line Based on ZigBee[J].Plating & Finishing,2021,(07):31.[doi:10.3969/j.issn.1001-3849.2021.01.0060]
[11]周苗淼,张 雨,沈喜训,等.芯片电镀铜添加剂的研究进展[J].电镀与精饰,2022,(2):60.[doi:10.3969/j.issn.1001-3849.2022.02.013]
 ZHOU Miaomiao,ZHANG Yu,SHEN Xixun,et al.Research Progress of the Copper Electroplating Additives in Chip Manufacturing[J].Plating & Finishing,2022,(07):60.[doi:10.3969/j.issn.1001-3849.2022.02.013]

更新日期/Last Update: 2025-07-08