[1]夏亚锋*,燕 琪,赵 婧,等.doi: 10.3969/j.issn.1001-3849.2025.12.008预处理对TA1纯钛阳极氧化膜颜色及微观形貌的影响[J].电镀与精饰,2025,(12):57-62.
　Xia Yafeng*,Yan Qi,Zhao Jing,et al.Effects of pretreatment on the color and microscopic morphology of TA1 pure titanium anodic oxide films[J].Plating & Finishing,2025,(12):57-62.
点击复制

doi: 10.3969/j.issn.1001-3849.2025.12.008预处理对TA1纯钛阳极氧化膜颜色及微观形貌的影响()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2025年12
页码:
57-62
栏目:
出版日期:
2025-12-31

文章信息/Info

Title:
Effects of pretreatment on the color and microscopic morphology of TA1 pure titanium anodic oxide films
作者:
夏亚锋1; 2*; 燕 琪1; 2; 赵 婧1; 2; 潘敏娜1; 2; 冯鹏博1; 2
(1. 西安秦钛思捷科技有限公司,陕西 西安 710016 ;2. 西安秦钛智造科技有限公司,陕西 西安 710016)
Author(s):
Xia Yafeng1; 2*;  Yan Qi1; 2;  Zhao Jing1; 2;  Pan Minna1; 2;  Feng Pengbo1; 2
(1. Xian QinTi Sijie Technologies Co., Ltd., Xian 710016, China; 2. Xian QinTi Intelligent Manufacturing Technologies Co., Ltd., Xian 710016, China)
关键词:
TA1纯钛; 预处理; 阳极氧化; 颜色; 表面形貌
Keywords:
TA1 pure titanium;  pretreatment;  anodic oxidation;  color;  surface morphology
分类号:
TG178；TQ153.6
文献标志码:
A
摘要:
为了探究预处理对TA1纯钛阳极氧化膜层的影响，采用不同预处理工艺并对其进行阳极氧化，对比了不同预处理条件下阳极氧化膜的颜色和表面形貌。结果表明：经过预处理后，阳极氧化膜层颜色色差降低、饱和度提高，颜色均一性得到改善；阳极氧化膜层表面簇状氧化物消失，呈现颗粒状氧化物，形貌均匀性得到改善；随着预处理次数增多，过度氧化和溶解导致阳极氧化膜层形貌均匀性下降，此时膜层颜色色差增加至1.92、颜色均一性降低。
Abstract:
In order to investigate the effect of pretreatment on the anodic oxidation film of TA1 pure titanium, the samples were anodized after different pretreatment processes, and the color and surface morphology of the anodic oxidation film under different pretreatment conditions were compared. The results show that the color difference of TA1 pure titanium anodic oxide film decreases, the saturation increases, and the color uniformity is improved after pretreatment. The cluster-type oxide on the surface of TA1 pure titanium anodic oxidation film disappears, presenting granular oxides, and the morphological uniformity is improved. With the increasing number of pretreatments, the morphological uniformity of the film decreases as a result of over-oxidation and dissolution, and the color difference of the film is increased by 1.92, and the color uniformity is reduced.

参考文献/References:

[1].伍俐, 付天琳, 于晓华, 等. 工业纯钛的阳极氧化特性及其抗腐蚀性能研究[J]. 热加工工艺, 2017, 46(4): 161-164, 167.
[2].彭西洋, 李雪峰. 钛合金在汽车工业中的应用现状及前景展望[J]. 汽车工艺师, 2023(4): 56-59.
[3].訾群. 钛合金研究新进展及应用现状[J]. 钛工业进展, 2008(2): 23-27.
[4].Zheng H M, Xu L, Jiao Y, et al. Fabrication and surface characterization of titanium dioxide nanotubes on titanium implants[J]. Frontiers in Materials, 2023, 10: 1325997.
[5].Otadi M, Borhani E, Faghihi S. Combined bulk nanostru-cturing and surface modifications of titanium substrate for improved corrosion behavior[J]. Surface and Coatings Technology, 2024, 493(2): 131229-131229.
[6].盛利. 钛材在新材料领域的新应用[J]. 中国有色金属, 2017(18): 35.
[7].黄海广, 肖寒, 熊汉城, 等. 钛材低成本生产技术的开发和应用[J]. 云南冶金, 2020, 49(6): 59-67.
[8].Ge M Z, Cao C Y, Huang J Y, et al. Synthesis, modification, and photo/photoelectrocatalytic degradation applications of TiO2 nanotube arrays: a review[J]. Nanotechnology Reviews, 2016, 5(1): 75-112.
[9].姜超平, 孙飞娟, 邢亚龙. 钛合金阳极氧化的研究进展[J]. 热加工工艺, 2018, 47(16): 7-12.
[10].邢俊恒, 夏正斌, 张燕红, 等. 阳极氧化参数对TiO2薄膜结晶行为影响的研究进展[J]. 化工进展, 2013, 32(3): 592-598.
[11].Renna G, Attolico M A, Moramarco V, et al. The role of peening processes as a pre‐treatment to anodizing on fatigue behavior of aircraft aluminum alloy[J]. Fatigue & Fracture of Engineering Materials & Structures, 2024, 47(4): 1312-1330.
[12].Ye Y Y, Zou Q, Xiao Y N, et al. Effect of interface pretreatment of Al alloy on bonding strength of the laser joined Al/CFRTP butt joint[J]. Micromachines, 2021, 12(2): 179.
[13].苏奥, 苏运娟. Ti-6Al-4V钛合金环保型阳极氧化及封闭处理研究[J]. 电镀与精饰, 2024, 46(3): 66-74.
[14].王倩, 何代华, 刘平, 等. 阳极氧化电解质的组分对钛基体和表面涂层的影响[J]. 材料研究学报, 2018, 32(4): 301-308.
[15].Asoh H, Fukumoto S, Shishido K, et al. Anodization of aluminum in a sodium hydroxide solution: effect of pH on chemical dissolution[J]. Journal of the Electrochemical Society, 2024, 171(12): 123504.
[16].Avalos-Hernández E E, Hernández-Torres J, Zamora-Peredo L, et al. Effect of temperature and incorporation of Cr on the microstructure and hardness of titanium anodized with HCl and glycerol[J]. Surface Review and Letters, 2023, 30(12): 2350088.
[17].Xie C Y, Chen Y S, Liu X L, et al. Effect of voltage and time on microstructure and corrosion resistance of anodic oxidation film on Al-5.5Zn-0.03In-1Mg-0.03Ti-0.08Sn alloy[J]. Journal of Alloys and Compounds, 2024, 1009: 176740.
[18].Pham V H, Duc D M, Hung N D, et al. Influence of current density on the morphology and structure of silver nanoparti-cles on anodized titanium for biomedical implant applica-tions[J]. Key Engineering Materials, 2024, 1002: 55-62.
[19].Su K X, Zhang J W, Cui G D, et al. Effects of sealing and prior shot peening treatments on fatigue behavior of sulphuric acid anodic oxidation coated 6082-T6 aluminium alloy[J]. International Journal of Fatigue, 2024, 183: 108251.
[20].Sapoletova N A, Kushnir S E, Ulyanov A N, et al. Effect of post-treatment on photocatalyt-ic activity of anodic titania photonic crystals[J]. Optical Materials, 2023, 144: 114350.
[21].Choi Y, Jeong C. Investigating the influence of pore-widening time control in electrochemical anodization for the formation of hybrid titanium nanostructures with enhanced superhydrophobicity for improved corrosion resistance efficiency[J]. Electrochimica Acta, 2024, 492: 144380.
[22].Aida S, Stefan R, Zinonas E, et al. Predictability and outcome of titanium color after different surface modifications and anodic oxidation[J]. Dental Materials Journal, 2022, 41(6): 930-936.
[23].徐照英, 张腾飞, 苏永要, 等. 钛合金表面阳极氧化着色及摩擦学特性研究[J]. 真空科学与技术学报, 2020, 40(8): 734-740.
[24].Wu L K, Bao Y T, Jiang M Y, et al. Insights into the surface pretreatment on the oxidation behavior of anodized TiAl alloy[J]. Corrosion Science, 2022, 207: 110571.
[25].李宁波. 医用钛及钛合金表面微—纳尺度生物活性氧化膜的感应加热制备及其生物学行为[D]. 济南: 山东大学, 2018.
[26].王志文, 刁瑞佳, 付天林, 等. TA2表面阳极氧化膜机械研磨调控技术及耐腐蚀行为[J]. 材料热处理学报, 2018, 39(5): 100-107.
[27].Sowa M, Greń K, Kukharenko A I, et al. Influence of electropolishing and anodic oxidation on morphology, chemical composition and corrosion resistance of niobium[J]. Materials Science and Engineering: C, 2014, 42: 529-537.
[28].Li W S, Zhang S Q, Li F. Effect of chemical polishing on the formation of TiO2 nanotube arrays using Ti mesh as a raw material[J]. Nanomaterials, 2024, 14(23): 1893.
[29].Wang Z W, Diao R J, Yuan Z T, et al. Surface mechanical attrition treatment and corrosion resistance behavior of TA2 anodic oxide film[J]. International Journal of Electrochemical Science, 2018, 13(5): 4411-4423.
[30].李玉海, 万智来, 蒋国瑜, 等. TA2纯钛材阳极氧化着色工艺[J]. 材料保护, 2011, 44(4): 38-40.
[31].超敏, 肖胜辉, 熊辉, 等. 钛合金阳极氧化工艺过程及其应用态势[J]. 能源研究与管理, 2012(2): 52-55.
[32].郑志军, 何蕊, 陈均焕, 等. 纯钛表面超疏水性着色膜的制备及性能[J]. 中国表面工程, 2020, 33(3): 61-70.
[33].Jiang Z L, Dai X, Norby T, et al. Investigation of pitting resistance of titanium based on a modified point defect model[J]. Corrosion Science, 2010, 53(2): 815-821.
[34].辛富生, 陶麒鹦, 田汉清, 等. 预氧化对于HDH钛粉钝化性能的影响[J]. 中国有色金属学报, 2022, 32(4): 940-950.
[35].杜青. 喷砂酸蚀(SLA)钛表面生物活化及性能表征[D]. 哈尔滨: 哈尔滨工业大学, 2016.
[36].王雨晨. 多孔钛材的表面改性对其耐蚀性及导电性的影响[D]. 北京: 北京化工大学, 2024.
[37].付天琳, 梅长云, 陈飞帆, 等. 表面纳米化对纯钛阳极氧化膜组织及特性的影响[J]. 稀有金属材料与工程, 2022, 51(3): 835-842.
[38].孔玢, 李丽, 刘正乔, 等. 工业纯钛在硫酸中的腐蚀行为及其机理研究[J]. 钛工业进展, 2022, 39(2): 18-23.
[39].Li X, Wang L, Fan L, et al. Understanding the effect of fluoride on corrosion behavior of pure titanium in different acids[J]. Corrosion Science, 2021, 192: 109812.

相似文献/References:

[1]胡素荣?,邓三平,唐 曦.含氰电镀废液的电化学氧化预处理研究[J].电镀与精饰,2020,(8):43.[doi:10.3969/j.issn.1001-3849.2020.08.0090]
　HU Surong,DENG Sanping,TANG Xi.Study on Electrochemical Oxidation Pretreatment of Cyanide-Containing Electroplating Wastewater[J].Plating & Finishing,2020,(12):43.[doi:10.3969/j.issn.1001-3849.2020.08.0090]
[2]党在清*.镁合金复合镀层的制备及其结构与性能表征[J].电镀与精饰,2020,(11):16.[doi:10.3969/j.issn.1001-3849.2020.11.0040]
　DANG Zaiqing*.Study on the Structure and Properties of Composite Coating on Magnesium Alloy[J].Plating & Finishing,2020,(12):16.[doi:10.3969/j.issn.1001-3849.2020.11.0040]
[3]李远会*,雷源源,黄碧芳,等. 不同预处理铝基铅合金惰性阳极组织和性能研究 [J].电镀与精饰,2022,(7):8.[doi:10.3969/j.issn.1001-3849.2022.07.002]
　LI Yuanhui*,LEI Yuanyuan,HUANG Bifang,et al.Study on Inert Anode Organization and Properties of Different Pretreatment Aluminum-Based Lead Alloys[J].Plating & Finishing,2022,(12):8.[doi:10.3969/j.issn.1001-3849.2022.07.002]

更新日期/Last Update: 2025-12-17