XIAO Yamei*,SUN Caixia,LIU Jingkun,et al.Research on the Corrosion Resistance of Cu/Ni Composite Bionic Super-Smooth Surface[J].Plating & Finishing,2020,(1):7-11.[doi:10.3969/j.issn.1001-3849.2020.01.002]
Cu/Ni复合仿生超滑表面耐蚀性能研究
- Title:
- Research on the Corrosion Resistance of Cu/Ni Composite Bionic Super-Smooth Surface
- 文献标志码:
- A
- 摘要:
- 本文针对碳钢在海洋环境中腐蚀严重的问题,采用水热法结合化学气相沉积技术及注入润滑油的三步法在碳钢表面制备了Cu/Ni复合仿生超滑表面。研究了仿生超滑表面对碳钢基体的腐蚀防护性能的影响。通过扫描电镜(SEM)、X射线光电子能谱(EDS)分析了碳钢表面水热反应2 h后形成的Cu/Ni涂层的形貌及组成成分;通过接触角测试分析了Cu/Ni疏水表面的润湿性;运用动电位极化曲线和交流阻抗谱(EIS)研究了仿生超滑表面在3.5 wt.% NaCl溶液中的耐蚀性能。结果表明,Cu/Ni膜层呈现微纳米级粗糙结构,Cu/Ni膜层疏水涂层与水滴的接触角为127.8±1°,Cu/Ni仿生超滑表面腐蚀电流密度为2.96×10-7 A·cm-2,相比于碳钢基体降低了2个数量级,对碳钢基体具有一定腐蚀防护作用。
- Abstract:
- In this paper, in view of the serious corrosion problem of carbon steel in marine environment, the Cu/Ni composite bionic super-smooth surface was prepared on the carbon steel surface by hydrothermal method combined with chemical vapor deposition technology and lubricant injection method. The effect of bionic super-smooth surface on the corrosion resistance of carbon steel matrix was studied. The morphology and composition of Cu/Ni was analyzed by scanning electron microscope (SEM) and energy-dispersive X-ray spectroscopy (EDS). The wettability of Cu/Ni hydrophobic film was tested by contact angle measurement. The corrosion resistance of bionic super-smooth surface was studied in 3.5 wt.% NaCl solution by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The results show that Cu/Ni coating exhibits a micro-nanometer rough structure. The contact angle the hydrophobic film layer of Cu/Ni coating is 127.8±1°. The corrosion current density of the Cu/Ni bionic super-smooth surface is 2.96×10-7 A·cm-2, which is two orders of magnitude lower than that of carbon steel matrix. The super-smooth surface has certain corrosion protection effect on carbon steel matrix.
参考文献/References:
[1] 唐晓. 海洋环境中碳钢腐蚀速度软测量方法研究[D]. 北京: 中国科学院研究生院(海洋研究所), 2003.
[2] 张天财. 海洋腐蚀防护的发展现状及思考[J]. 船舶工程, 2018, 40(10): 8-11.
[3] 张晓东. 胡裕龙, 卜世超,等. 船体钢海水腐蚀研究进展[J]. 装备环境工程, 2018, 15(6): 33-40.
[4] 吕耀辉. 电化学阻抗技术在金属腐蚀及涂层防护中的研究进展[J]. 电镀与精饰, 2018, 40(6): 22-28.
[5] 杨钦. 工程实用性超疏水自清洁涂层防结冰行为及机理研究[D]. 北京: 中国科学院大学(中国科学院重庆绿色智能技术研究院), 2017.
[6] Wong T S, Kang S H, Tang S K Y, et al. Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity[J]. Nature, 2011, 477(7365): 443-449.
[7] Sunny S, Vogel N, Howell C, et al. Lubricant‐infused nanoparticulate coatings assembled by layer‐by‐layer deposition[J]. Advanced Functional Materials, 2014, 24(42): 6658-6667.
[8] Wang P, Zhang D, Sun S, et al. Fabrication of slippery lubricant-infused porous surface with high underwater transparency for the control of marine biofouling[J]. ACS Applied Materials & Interfaces, 2016, 9(1): 972-982.
相似文献/References:
[1]苏展,于金山,董 浩,等.花状Ni(OH)2的制备及其电化学性能研究[J].电镀与精饰,2022,(2):16.[doi:10.3969/j.issn.1001-3849.2022.02.004]
SU Zhan,YU Jinshan,DONG Hao,et al.Preparation and Electrochemical Properties of Floral Ni ( OH ) 2[J].Plating & Finishing,2022,(1):16.[doi:10.3969/j.issn.1001-3849.2022.02.004]
[2]唐浩铭,孙国富,潘高峰,等. 不锈钢基超疏水表面的制备及其性能研究 [J].电镀与精饰,2022,(7):42.[doi:10.3969/j.issn.1001-3849.2022.07.008]
TANG Haoming,SUN Guofu,et al.Preparation of Stainless Steel-Based Superhydrophobic Surface and Its Performance[J].Plating & Finishing,2022,(1):42.[doi:10.3969/j.issn.1001-3849.2022.07.008]
备注/Memo
收稿日期: 2019-07-03;修回日期: 2019-08-17
通信作者: 肖亚梅, email: yamiexiao1@163.com
基金项目: 山东省高校科研计划项目(J18KB005,J18KA030,J18KA047)青岛滨海学院青年科技项目(2019KQ02)