[1]唐祝兴,余 孟.ZnO/石墨烯复合光催化材料的制备及性能研究[J].电镀与精饰,2019,(7):20-24.[doi:10.3969/j.issn.1001-3849.2019.07.005]
　TANG Zhuxing,YU Meng.Preparation and Properties of ZnO / Graphene Composite Photocatalyst[J].Plating & Finishing,2019,(7):20-24.[doi:10.3969/j.issn.1001-3849.2019.07.005]
点击复制

ZnO/石墨烯复合光催化材料的制备及性能研究()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2019年7
页码:
20-24
栏目:
出版日期:
2019-07-15

文章信息/Info

Title:
Preparation and Properties of ZnO / Graphene Composite Photocatalyst
作者:
唐祝兴; 余 孟
沈阳理工大学 环境与化学工程学院，辽宁 沈阳 110159
Author(s):
TANG Zhuxing;  YU Meng
沈阳理工大学 环境与化学工程学院，辽宁 沈阳 110159）摘要： 本文采用将ZnO与石墨烯制成复合光催化材料并使其催化分解亚甲基蓝的方法来研究光催化剂对污染物的分解效率。采用扫描电镜分析（SEM）和X射线能谱分析（EDS）等方法对所制备的光催化剂样品进行表征，通过表征结果可以看到石墨烯均匀的生长在纳米ZnO六方晶型结构上，表明ZnO/石墨烯复合光催化材料已经成功制备。通过使用光催化剂对亚甲基蓝的降解考察了其光催化性能，结果表明醇热法制备的ZnO/石墨烯复合材料对亚甲基蓝具有很好的光催化降解效果。关键词： 光催化；石墨烯；ZnO；亚甲基蓝中图分类号： TQ153.2 文献标识码： A Preparation and Properties of ZnO / Graphene Composite PhotocatalystTANG Zhuxing， YU Meng （School of Environmental and Chemical Engineering, Shenyang Ligong University, Shenyang 110159, China
关键词:
光催化; 石墨烯; ZnO; 亚甲基蓝
Keywords:
photocatalysis;  graphene;  ZnO;  methylene blue
DOI:
10.3969/j.issn.1001-3849.2019.07.005
文献标志码:
A
摘要:
本文采用将ZnO与石墨烯制成复合光催化材料并使其催化分解亚甲基蓝的方法来研究光催化剂对污染物的分解效率。采用扫描电镜分析（SEM）和X射线能谱分析（EDS）等方法对所制备的光催化剂样品进行表征，通过表征结果可以看到石墨烯均匀的生长在纳米ZnO六方晶型结构上，表明ZnO/石墨烯复合光催化材料已经成功制备。通过使用光催化剂对亚甲基蓝的降解考察了其光催化性能，结果表明醇热法制备的ZnO/石墨烯复合材料对亚甲基蓝具有很好的光催化降解效果。
Abstract:
In this paper, ZnO and graphene were used as composite photocatalytic materials to catalyze the decomposition of methylene blue to study the decomposition efficiency of photocatalyst to pollutants. The prepared photocatalyst samples were characterized by scanning electron microscopy (SEM) and X-ray energy dispersive spectroscopy (EDS). The results showed that the graphene could grow uniformly in the nano-ZnO hexagonal structure, which indicated that ZnO / graphene composite photocatalytic materials had been successfully prepared. The photocatalytic performance of methylene blue was investigated by photocatalytic degradation of methylene blue. The results showed that the ZnO / graphene composites prepared by alcohol thermal method had good photocatalytic degradation effect on methylene blue.

参考文献/References:

[1] Fujishima A, Honda K. Electrochemical photolysis of water at a semiconductor eletrode[J]. Nature, 1972, 37(1): 238-245.
[2] Hamidi A A, Irdan D. Review of the mechanism and operational factors influencing the degradation process of contaminants in heterogenous photocatalysis[J]. Journal of Chemical Research, 2016, 40(2): 704-712.
[3] 黄进. 光催化氧化降解水中有机污染物技术综述[J]. 重庆环境科学, 2001, 23(5): 1-2.
[4] Shixin W, Qiyuan H. Electrochemical deposition of semiconductor oxides on reduced graphene oxide-based flexible, transparent, and conductive electrodes[J]. Phys.
Chem. C. 2010, 1(14): 11816-11821.
[5] 王文杰. 石墨烯复合材料的制备及其在污水处理中的应用研究[D]. 天津: 河北工业大学, 2015.
[6] Xu Z, Buehler M J. Interface structure and mechanics between graphene and metal substrates: a first-principles study[J]. Condensed Matter: An Institute of Physics Journal, 2010, 22(48): 45-51.
[7] William S, Hummers J R, Richard E. Preparation of graphitic oxide[J]. Materials Science and Engineering, 2001, 140(1): 816-824.

相似文献/References:

[1]唐祝兴*,余 孟,张岐龙.MIL-101（Fe）光催化材料的制备及性能研究[J].电镀与精饰,2020,(5):19.[doi:10.3969/j.issn.1001-3849.2020.05.0030]
　TANG Zhuxing*,YU Meng,ZHANG Qilong.Preparation and Properties of MIL-101 (Fe) Photocatalytic Materials[J].Plating & Finishing,2020,(7):19.[doi:10.3969/j.issn.1001-3849.2020.05.0030]
[2]赵 晶,刘诗伟,杨雨欣,等.电沉积制备纳米金-石墨烯复合材料修饰电极测定氨苄西林[J].电镀与精饰,2022,(11):41.[doi:10.3969/j.issn.1001-3849.2022.11.008]
　ZHAO Jing,LIU Shiwei,YANG Yuxin,et al.Electrodeposition of Au Nanoparticle-Graphene Composites Modified Electrode for Ampicillin Detection[J].Plating & Finishing,2022,(7):41.[doi:10.3969/j.issn.1001-3849.2022.11.008]
[3]巩鹏妮,弓巧娟 *,梁云霞,等.镍钴硫化物、石墨烯与聚苯胺复合材料在超级电容器中的应用研究进展[J].电镀与精饰,2023,(3):90.[doi:10.3969/j.issn.1001-3849.2023.03.013]
　Gong Pengni,Gong Qiaojuan *,Liang Yunxia,et al.Research progress of Ni-Co sulfide graphene and polyaniline composites applied in supercapacitors[J].Plating & Finishing,2023,(7):90.[doi:10.3969/j.issn.1001-3849.2023.03.013]
[4]史雨菲,李小丽,何天翊,等.石墨烯基材料在3D打印领域的研究进展[J].电镀与精饰,2023,(7):74.[doi:10.3969/j.issn.1001-3849.2023.07.010]
　Shi Yufei,Li Xiaoli,He Tianyi,et al.Research progress of graphene-based materials in 3D printing field[J].Plating & Finishing,2023,(7):74.[doi:10.3969/j.issn.1001-3849.2023.07.010]
[5]陈 可,张 琦,王凯凤,等. 聚酰亚胺复合薄膜性能研究 [J].电镀与精饰,2024,(2):96.[doi:10.3969/j.issn.1001-3849.2024.02.014]
　Chen Ke,Zhang Qi,Wang Kaifeng,et al.Study on the properties of polyimide composite film[J].Plating & Finishing,2024,(7):96.[doi:10.3969/j.issn.1001-3849.2024.02.014]
[6]邓名洋*,李瑞金,张南瑞,等. 石墨烯添加剂与电流密度对铝锂合金阳极氧化膜层耐蚀性能的影响 [J].电镀与精饰,2024,(2):101.[doi:10.3969/j.issn.1001-3849.2024.02.015]
　Deng Mingyang*,Li Ruijin,Zhang Nanrui,et al.Effect of graphene additive and current density on corrosion resistance of anodized coatings on aluminium-lithium alloys[J].Plating & Finishing,2024,(7):101.[doi:10.3969/j.issn.1001-3849.2024.02.015]
[7]范宇涵,侯攀超,宋振兴*,等.doi: 10.3969/j.issn.1001-3849.2025.10.016石墨烯/水性环氧树脂复合涂层的耐腐蚀性能研究[J].电镀与精饰,2025,(10):121.
　Jiang Yuxin,Jiang Ge,Hong Lin,et al.Investigation on the corrosion resistance properties of graphene-reinforced waterborne epoxy composite coatings Fan Yuhan1, Hou Panchao1, Song Zhenxing1*, Kuang Hong 2, Wang Liang3,[J].Plating & Finishing,2025,(7):121.
[8]陆 昆*,赵立军.doi: 10.3969/j.issn.1001-3849.2025.12.014TiO2基光催化材料的制备、改性和应用研究进展[J].电镀与精饰,2025,(12):107.
　Lu Kun*,Zhao Lijun.Research progress on preparation, modification and application of TiO2-based photocatalytic materials[J].Plating & Finishing,2025,(7):107.

备注/Memo

备注/Memo:
收稿日期： 2018-12-23；修回日期： 2019-03-11
基金项目： 辽宁省教育厅科学研究一般项目（LG201619）
更新日期/Last Update: 2019-07-10