Deng Mingyang*,Li Ruijin,Zhang Nanrui,et al.Effect of graphene additive and current density on corrosion resistance of anodized coatings on aluminium-lithium alloys[J].Plating & Finishing,2024,(2):101-106.[doi:10.3969/j.issn.1001-3849.2024.02.015]
石墨烯添加剂与电流密度对铝锂合金阳极氧化膜层耐蚀性能的影响
- Title:
- Effect of graphene additive and current density on corrosion resistance of anodized coatings on aluminium-lithium alloys
- Keywords:
- aluminium-lithium alloys ; anodizing ; graphene ; corrosion resistance
- 分类号:
- TQ153.2
- 文献标志码:
- A
- 摘要:
- 本文以 Al-Li-Cu-Mg 合金为研究对象,在混酸电解液体系下进行阳极氧化处理,制备不同电流密度以及石墨烯掺入后的氧化膜。通过 SEM 、 XRD 、 EDS 等分析测试手段分析了各参数下膜层的表面与截面形貌、元素、物相组成等,并通过电化学工作站等仪器分别分析了膜层的耐蚀等性能。研究不同电流大小与石墨烯掺入后对膜层性能的影响机制。结果表明:电流密度的增加会使得材料膜层的厚度先增后减、缺陷增加,耐蚀性能先增后减,阳极氧化 膜耐蚀性能最佳电流密度为 15 A/dm 2 。同时石墨烯的掺入会降低膜层耐蚀性,阳极氧化膜腐蚀电流密度为 4.898×10 -7 A·cm -2 。
- Abstract:
- : Al-Li-Cu-Mg alloy was anodized in mixed acid electrolyte system to prepare oxide films with different current densities and graphene infiltration. The surface and cross-sectional morphology , elemental composition , and phase composition of the film layer under various parameters were analyzed using SEM , XRD , EDS and other analysis and testing methods. The corrosion resistance and other properties of the film layer were also analyzed using electrochemical workstations and other instruments. The influence mechanism of different current and graphene penetration on the film properties was studied. The experimental results show that an increase in current density will first increase and then decrease the thickness of the material film layer , increase defects , and increase and then decrease the corrosion resistance. The optimal current density for corrosion resistance of anodic oxide film is 15 A/dm 2 . At the same time , the inclusion of graphene will reduce the corrosion resistance of the film , and the corrosion current density of the anodized film is 4.898×10 -7 A·cm -2 .
参考文献/References:
[1] 尹嘉明 , 马鹏程 , 陈永来 , 等 . 铝锂合金的发展及在运载火箭贮箱的应用 [J]. 兵器材料科学与工程 , 2020, 43(3): 137-141.
[2] 李劲风 , 陈永来 , 马云龙 , 等 . 国内铝锂合金基础研究及应用技术开发 [J]. 宇航材料工艺 , 2021, 51(4): 37-47.
[3] 王一唱 , 童鑫 , 游国强 , 等 . 铝锂合金组织 , 性能及成形工艺的研究现状与展望 [J]. 稀有金属材料与工程 , 2021, 42(3): 1069-1083.
[4] 李慧东 , 张覃轶 , 刘伟 , 等 . 深冷处理对 440C 马氏体不锈钢组织和耐蚀性的影响 [J]. 金属热处理 , 2022, 47(8): 152-157.
[5] 李晓刚 . 材料腐蚀与防护概论 [M]. 北京 : 机械工业出版社 , 2017.
[6] Ma Y, Zhou X, Liao Y, et al. Effect of anodizing parameters on film morphology and corrosion resistance of AA2099 aluminum-lithium alloy[J]. Journal of the Electrochemical Society, 2016, 163(7): C369-C376.
[7] 颜鹏 , 厉新明 , 何林波 , 等 . 2198 和 5A90 铝锂合金脉冲阳极氧化膜制备及耐蚀性 [J]. 航空材料学报 , 2017, 37(2): 13-20.
[8] 肖金涛 , 陈妍 , 邢明秀 , 等 . 工艺参数对 2195 铝锂合金阳极氧化膜的耐蚀性影响 [J]. 中国腐蚀与防护学报 , 2019, 39(5): 431-438.
[9] 张政权 , 王玉玲 , 李良锋 , 等 . 阳极氧化对 2060-T8 铝锂合金氧化膜的形貌控制 [J]. 西南科技大学学报 , 2020, 35(2): 63-68.
[10] 韩保红 , 张骐 , 孙志华 , 等 . 前处理工艺对航空铝锂合金硫酸阳极氧化膜层性能影响 [J]. 航空材料学报 , 2017, 37(5): 48-54.
[11] 李文 , 朱彦海 , 白雪飘 , 等 . 2060 铝锂合金在 3 种溶液体系中所得阳极氧化膜层的性能 [J]. 电镀与涂饰 , 2018, 37(11): 492-496.
[12] 凌付平 . 铝锂合金表面制备草酸阳极氧化膜及无铬封孔处理 [J]. 电镀与精饰 , 2021, 43(9): 45-50.
[13] 刘湘伟 , 李劲风 , 张瑞丰 , 等 . 工艺参数对 2195 铝锂合金阳极氧化膜层腐蚀行为的影响 [J]. 材料保护 , 2020, 53(3): 107-111, 116.
[14] 仇兆忠 , 殷波 , 刘爱莲 , 等 . 石墨烯对铝合金微弧氧化陶瓷涂层耐磨性能的影响 [J]. 黑龙江科技大学学报 , 2020, 30(5): 562-565, 583.
[15] Lee C G, Wei X D, Kysar J W, et al. Measurement of the elastic properties and intrinsic strength of monolayer graphene [J]. Science, 2008, 321(5887): 385-388.
[16] Novoselov K S, Geim A K, Morozov S V, et al. Electric field effect in atomically thin carbon films [J]. Science, 2004, 306(5696): 666-669.
[17] Gao Y W, Hao P. Mechanical properties of monolayer graphene under tensile and compressive loading [J]. Physica E: Low-Dimensional Systems and Nanostructures, 2009, 41(8): 1561-1566.
[18] 张子聪 , 郝建军 , 赵荣兴 . 铝合金复合石墨烯薄膜的制备及腐蚀性能研究 [J]. 电镀与精饰 , 2021, 43(7): 15-19.
[19] 刘静 , 张鹏 . 7075 铝合金阳极氧化膜的腐蚀行为 [J]. 材料保护 , 2013, 46(8): 56-58.
[20] 李文文 , 丁良生 , 艾云龙 , 等 . 铝合金阳极氧化膜的耐蚀性能 [J]. 材料保护 , 2013, 48(3): 46-48.
[21] 张政权 , 王玉玲 , 李良锋 , 等 . 阳极氧化对 2060-T8 铝锂合金氧化膜的形貌控制 [J]. 西南科技大学学报 , 2020, 35(2): 63-68.
相似文献/References:
[1]黄允芳,蔡锡昌.铝型材立式阳极氧化线“两头色差”问题的研究[J].电镀与精饰,2019,(1):33.[doi:10.3969/j.issn.1001?3849.2019.01.007]
HUANG Yunfang,CAI Xichang.Studies on the Problem of “Color Difference between Two Ends” in the Anodizing Vertical Line for the Aluminum Profile[J].Plating & Finishing,2019,(2):33.[doi:10.3969/j.issn.1001?3849.2019.01.007]
[2]徐方强*,邹松华,张 富,等.硫酸-酒石酸钾钠宽温阳极氧化槽液体系研究[J].电镀与精饰,2019,(12):5.[doi:10.3969/j.issn.1001-3849.2019.12.002]
XU Fangqiang*,ZOU Songhua,ZHANG Fu,et al.Research of Anodizing at Wide Temperature in Sulfuric Acid-Potassium Sodium Tartrate Bath System[J].Plating & Finishing,2019,(2):5.[doi:10.3969/j.issn.1001-3849.2019.12.002]
[3]黄允芳*,蔡锡昌.铝型材电解着色工艺向环保型工艺转换的研究[J].电镀与精饰,2019,(12):10.[doi:10.3969/j.issn.1001-3849.2019.12.003]
HUANG Yunfang*,CAI Xichang.Studies on Environmentally Friendly Technology Transformation of Electrolytic Coloring for Al Profile[J].Plating & Finishing,2019,(2):10.[doi:10.3969/j.issn.1001-3849.2019.12.003]
[4]孙慧艳*,王兴雅,孙鹏飞.钛合金蓝色腐蚀检查工艺技术研究[J].电镀与精饰,2020,(1):36.[doi:10.3969/j.issn.1001-3849.2020.01.008]
SUN Huiyan*,WANG Xingya,SUN Pengfei.Research on the Blue Corrosion Inspection Technology of Titanium Alloy[J].Plating & Finishing,2020,(2):36.[doi:10.3969/j.issn.1001-3849.2020.01.008]
[5]王志明,高用文,陈旭丹,等.汽车行李架铝阳极氧化耐酸碱工艺开发[J].电镀与精饰,2021,(4):35.[doi:10.3969/j.issn.1001-3849.2021.04.008]
WANG Zhiming,GAO Yongwen,et al.Development of Acid and Alkali Resistant Aluminum Anodizing Process for Automobile Luggage Rack[J].Plating & Finishing,2021,(2):35.[doi:10.3969/j.issn.1001-3849.2021.04.008]
[6]赵光练*,文璞山.电连接器用ZL101A铝合金混合酸阳极氧化及氧化膜的耐蚀性[J].电镀与精饰,2021,(10):31.[doi:10.3969/j.issn.1001-3849.2021.10.006]
ZHAO Guanglian*,WEN Pushan.Anodic Oxidation of ZL101A Aluminium Alloy for Electrical Connector with Mixed Acid and Corrosion Resistance of Oxidation Film[J].Plating & Finishing,2021,(2):31.[doi:10.3969/j.issn.1001-3849.2021.10.006]
[7]黄允芳*,蔡锡昌.二次电解着色法防紫铜色铝型材褪色工艺[J].电镀与精饰,2021,(10):55.[doi:10.3969/j.issn.1001-3849.2021.10.011]
HUANG Yunfang*,CAI Xichang.Process of the Seconday Electrolytic Coloring Method to Prevent Copper Color Discoloration on Al Profile[J].Plating & Finishing,2021,(2):55.[doi:10.3969/j.issn.1001-3849.2021.10.011]
[8]苏 奥,王 磊,陈 慧*.铝锂合金混合酸阳极氧化及无铬封闭研究[J].电镀与精饰,2022,(1):22.[doi:10.3969/j.issn.1001-3849.2022.01.004]
SU Ao,WANG Lei,CHEN Hui*.Study on Mixed Acid Anodic Oxidation and Chromium Free Sealing of Aluminium Lithium Alloy[J].Plating & Finishing,2022,(2):22.[doi:10.3969/j.issn.1001-3849.2022.01.004]
[9]黄允芳*,蔡锡昌,蒋利民.恒压与恒流两种铝阳极氧化控制方法的比较[J].电镀与精饰,2022,(2):12.[doi:10.3969/j.issn.1001-3849.2022.02.003]
HUANG Yunfang *,CAI Xichang ?JIANG Limin.Comparison of Two Kinds Control Method of the Constant Voltage and Constant Current for Aluminum Anodizing[J].Plating & Finishing,2022,(2):12.[doi:10.3969/j.issn.1001-3849.2022.02.003]
[10]孙文明*,闫晟煜.阳极氧化和封孔处理改善铝合金表面性能的研究[J].电镀与精饰,2022,(4):20.[doi:10.3969/j.issn.1001-3849.2022.04.005]
SUN Wenming *,YAN Shengyu.Study on Improvement of Surface Properties of Aluminum Alloy by Anodic Oxidation and Sealing Treatment[J].Plating & Finishing,2022,(2):20.[doi:10.3969/j.issn.1001-3849.2022.04.005]
备注/Memo
收稿日期: 2023-05-15 修回日期: 2023-07-05 * 通信作者: 邓名洋( 2001 —),男,本科生, email : 2696714349@qq.com?/html>