[1]徐振邦,陆振涛,柯喜敏,等.铝合金电子元器件的表面涂层与耐蚀性能研究[J].电镀与精饰,2019,(10):9-12.[doi:10.3969/j.issn.1001-3849.2019.10.003]
　XU Zhenbang,LU Zhentao,KE Ximin,et al.Study on Surface Coating and Corrosion Resistance of Aluminum Alloy Electronic Components[J].Plating & Finishing,2019,(10):9-12.[doi:10.3969/j.issn.1001-3849.2019.10.003]
点击复制

铝合金电子元器件的表面涂层与耐蚀性能研究()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2019年10
页码:
9-12
栏目:
出版日期:
2019-10-15

文章信息/Info

Title:
Study on Surface Coating and Corrosion Resistance of Aluminum Alloy Electronic Components
作者:
徐振邦1; 陆振涛2; 柯喜敏1; 罗峰瑞3
1.江苏信息职业技术学院，江苏 无锡 214153； 2.燕山大学，河北 秦皇岛 066004； 3.工业和信息化部电子第五研究所，江苏 无锡 214445
Author(s):
XU Zhenbang1;  LU Zhentao2;  KE Ximin1;  LUO Fengrui3
1. Jiangsu Vocational College of Information Technology, Wuxi 214153, China;　2. Yanshan University, Qinhuangdao 066004, China;　3. The Fifth Institute of Electronics, Ministry of Industry and Information Technology, Wuxi 214445, China
关键词:
微弧氧化; 膜层; 添加剂; 浓度; 腐蚀性能
Keywords:
micro arc oxidation;  film;  additive;  concentration;  corrosion resistance
DOI:
10.3969/j.issn.1001-3849.2019.10.003
文献标志码:
A
摘要:
研究了微弧氧化主盐溶液中十二烷基苯磺酸钠和十二烷基硫酸钠浓度对电子元器件用LY12铝合金表面微弧氧化膜层厚度、膜层表面和截面形貌、物相组成和电化学性能的影响。结果表明，随着电解液中十二烷基苯磺酸钠浓度的提高，膜层厚度呈现先增加而后减小的趋势，当其浓度为0.04 g/L时膜层厚度达最大。溶液中添加不同浓度十二烷基苯磺酸钠或十二烷基硫酸钠后得到的微弧氧化膜层的腐蚀电位均高于基础主盐膜层，相应的耐腐蚀性能更好。微弧氧化膜层的厚度与耐腐蚀性能之间没有明显的对应关系，而与膜层中显微孔洞数量及其分布有关。
Abstract:
The effects of concentration of sodium dodecyl benzene sulfonate and sodium dodecyl sulfate on the thickness, surface and cross-section morphology, physical and electrochemical properties of surface micro arc oxidation film on LY12 aluminum alloy were studied. The results showed that the thickness of the film increased first and then decreased with the increase of the concentration of sodium dodecyl benzene sulfonate, which reached the maximum when the concentration was 0.04 g/L. The corrosion potential of the oxidation film shifted positively compared with basic salt coating after adding sodium dodecyl benzene sulfonate and sodium dodecyl sulfate into the solution, which implied the better corrosion resistance. There was no obvious relationship between the thickness of micro arc oxidation film and the corrosion resistance, but it is related to the number and distribution of micro pores in the film.

参考文献/References:

[1] Li Q B, Liang J, Liu B X. Effects of cathodic voltages on structure and wear resistance of plasma electrolytic oxidation coatings formed on aluminium alloy[J]. Applied Surface Science, 2014, 297(4): 176-181.
[2] Erarslan Y. Wear performance of in-situ aluminum matrix composite after micro-arc oxidation[J]. Transactions of Nonferrous Metals Society of China, 2013, 23(2): 347-352.
[3] 温世峰, 陈霞, 刘军. 氧化时间对2024铝合金表面微弧氧化涂层组织与耐蚀性的影响[J]. 热加工工艺, 2016, 45(14): 139- 143.
[4] 项南, 宋仁国, 赵坚. 6063铝合金微弧氧化陶瓷涂层的显微组织和力学性能[J]. 中国有色金属学报, 2015, 25(10): 3323- 3328.
[5] 孙国元, 刘超锋, 杨莉. 变形铝合金在不同电解液中微弧氧化涂层的性能[J]. 铸造技术, 2009, 30(6): 773-775.
[6] Yang Y, Liu Y H. Effects of current density on the microstructure and the corrosion resistance of alumina coatings embedded with SiC nano-particles produced by micro-arc oxidation[J]. Journal of Materials Science and Technology, 2010, 289(26): 1016-1020.
[7] 王艳秋, 王岳, 陈派明. 7075铝合金微弧氧化涂层的组织结构与耐蚀耐磨性能[J]. 金属学报, 2011, 47(4):455-461.

相似文献/References:

[1]方云鹏,杜克勤*,郭泉忠,等.负向电压对LA91镁锂合金微弧氧化膜耐蚀性的影响[J].电镀与精饰,2021,(3):21.[doi:10.3969/j.issn.1001-3849.2021.03.005]
　FANG Yunpeng,DU Keqin*,et al.方云鹏1，2，杜克勤1*，郭泉忠1，2，王勇1，潘晓春3[J].Plating & Finishing,2021,(10):21.[doi:10.3969/j.issn.1001-3849.2021.03.005]
[2]张 宇*,黄传林,王 恺.铝合金微弧氧化工件局部平面保护方法研究[J].电镀与精饰,2022,(11):1.[doi:10.3969/j.issn.1001-3849.2022.11.001]
　ZHANG Yu*,HUANG Chuanlin,WANG Kai.Research on Micro-Arc Oxidation Plane Protection of Aluminum Alloys[J].Plating & Finishing,2022,(10):1.[doi:10.3969/j.issn.1001-3849.2022.11.001]
[3]李廷取 *,刘祥玲,刘文异. 不同占空比对6061铝合金微弧氧化着色及性能的影响研究 [J].电镀与精饰,2022,(9):20.[doi:10.3969/j.issn.1001-3849.2022.09.004]
　LI Tingqu *,LIU Xiangling,LIU Wenyi.Study on Microarc Oxidation Coloring and Properties of 6061 Aluminum Alloy with Different Duty Ratios[J].Plating & Finishing,2022,(10):20.[doi:10.3969/j.issn.1001-3849.2022.09.004]
[4]司志伟*,尹正宇,刘月,等.稀土盐Er（NO3）3掺杂对纯镁微弧氧化膜层耐磨性的影响[J].电镀与精饰,2024,(3):59.[doi:10.3969/j.issn.1001-3849.2024.03.009]
　Si Zhiwei*,Yin Zhengyu,Liu Yue,et al.Effect of Er ( NO 3 ) 3 addition on wear resistance of pure magnesium micro-arc oxide film layer[J].Plating & Finishing,2024,(10):59.[doi:10.3969/j.issn.1001-3849.2024.03.009]
[5]张雨露,祁 星,姜 波,等.硝酸铈添加剂对 AZ91D 镁合金微弧氧化膜组织与性能的影响[J].电镀与精饰,2024,(8):18.[doi:10.3969/j.issn.1001-3849.2024.08.003]
　,*,et al.Effects of cerous nitrateadditive on microstructure and properties of MAO coatings on AZ91D magnesium alloy[J].Plating & Finishing,2024,(10):18.[doi:10.3969/j.issn.1001-3849.2024.08.003]
[6]收稿日期： 0-0-7 修回日期： 0-0-8.镁合金微弧氧化膜致密化技术研究进展[J].电镀与精饰,2024,(11):76.
　Wu Yu * Li Yueqiao Hong Wei Shen Yizhou * Du Gang Shen Zhicong.Research advance in densification for micro-arc oxidation film on magnesium alloy[J].Plating & Finishing,2024,(10):76.
[7]刘明杰,刘宁华*,赖心翘,等.doi: 10.3969/j.issn.1001-3849.2025.02.016一种用于镁铝合金表面微弧氧化陶瓷膜的封闭剂及性能研究[J].电镀与精饰,2025,(02):106.
　Liu Mingjie,Liu Ninghua*,Lai Xinqiao,et al.A sealant and performance study for micro-arc oxide ceramic film on the surface of magnesium-aluminum alloy[J].Plating & Finishing,2025,(10):106.
[8]方 琴,周棣华,蔺虹宾,等.doi: 10.3969/j.issn.1001-3849.2025.09.006ZrO2颗粒对铝合金微弧氧化膜层组织和性能的影响[J].电镀与精饰,2025,(09):38.
　Fang Qin,Zhou Dihua,Lin Hongbin,et al.Effect of ZrO2 particles on microstructure and properties of micro arc oxidation films on aluminum alloys[J].Plating & Finishing,2025,(10):38.
[9]张慧芳.doi: 10.3969/j.issn.1001-3849.2026.01.007工艺参数对家居金属制品表面微弧氧化镀层性能的影响[J].电镀与精饰,2026,(01):53.
　ZHANG Huifang.Effects of process parameters on surface micro-arc oxidation coating performance of home metal products[J].Plating & Finishing,2026,(10):53.

备注/Memo

备注/Memo:
收稿日期： 2018-08-04；修回日期： 2019-04-07
更新日期/Last Update: 2019-10-10