PDF下载 分享
[1]宋进朝,韩文静*,陶 勇.玄武岩纤维表面改性及在混凝土环境中的应用研究[J].电镀与精饰,2020,(10):26-32.[doi:10.3969/j.issn.1001-3849.2020.10.0060]
 SONG Jinchao,HAN Wenjing*,TAO Yong.Progress in Surface Modification of Basalt Fiber and Its Application in Concrete Environment[J].Plating & Finishing,2020,(10):26-32.[doi:10.3969/j.issn.1001-3849.2020.10.0060]
点击复制

玄武岩纤维表面改性及在混凝土环境中的应用研究

参考文献/References:

[1] 王飙鹏, 张伟. 玄武岩纤维的性能与应用[J]. 建材技术与应用, 2002, (4): 17-18.
Wang B P, Zhang W. Properties and application of basalt fiber[J]. Research & Application of Building Materials, 2002, (4): 17-18 (in Chinese).
[2] Rabinovich F N, Zueva V N, Makeeva L V. Stability of basalt fibers in a medium of hydrating cement[J]. Keramika, 2001, (12): 29-32.
[3] Quagliarini E, Monni F, Lenci S, et al. Tensile characterization of basalt ?ber rods and ropes: a ?rst contribution[J]. Construction and Building Materials, 2012, 34: 372-380.
[4] 肖同亮, 李卓, 赵树高. 连续玄武岩纤维表面改性方法研究进展[J]. 化工新型材料, 2016, 44(11): 26-30.
Xiao T L, Li Z, Zhao S G. Research progress on surface modification of continuous basalt fiber[J]. New Chemical Materials, 2016, 44 (11): 26-30 (in Chinese).
[5] Dhand V, Mittal G, Yop K, et al. A short review on basalt ?ber reinforced polymer composites[J]. Composites Part B, 2015, 73: 166-180.
[6] Wei B, Cao H L, Song S H. Surface modification and characterization of basalt fibers with hybrid sizings[J]. Composite Part A, 2011, 42: 22-29.
[7] Jiang C H, Fan K, Wu F, et al. Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete[J]. Materials and Design, 2014, 58: 187-193.
[8] Kabay N. Abrasion resistance and fracture energy of concretes with basalt fiber[J]. Construction and Building Materials, 2014, 50(50): 95-101.
[9] Singha K. A short review on basalt ?ber[J]. International Journal of Textile Science, 2012, 1(4): 19-28.
[10] Fiore V, Scalici T, Bella G D, et al. A review on basalt fibre and its composites[J]. Composites Part B, 2015, 74: 74-94.
[11] 贾明皓, 肖学良, 钱坤.玄武岩纤维及其增强水泥基复合材料研究进展[J]. 硅酸盐通报, 2018, 37(11): 3467-3474.
Jia M H, Xiao X L, Qian K. Research progress in basalt fiber and its reinforced cement-based composites[J]. Bulletion of the Chinese Ceramic Society, 2018, 37(11): 3467-3474 (in Chinese).
[12] 王广健, 尚德库, 胡琳娜, 等.玄武岩纤维的表面修饰及生态环境复合过滤材料的制备与性能研究[J]. 复合材料学报, 2004, (1): 38-44.
Wang G J, Shang D K, Hu L N, et al. Investigation of modification of basalt fibers and preparation of composites [J]. Acta Materiae Compositae Sinica, 2004, (1): 38-44 (in Chinese).
[13] Manikandan V, Winowlin Jappes J T, Suresh Kumar S M, et al. Investigation of the effect of surface modifications on the mechanical properties of basalt fibre reinforced polymer composites[J]. Composites Part B, 2012, 43(2): 812-818.
[14] Nasir V, Karimipour H, Taheri-Behrooz F, et al. Corrosion behaviour and crack formation mechanism of basalt fibre in sulphuric acid[J]. Corrosion Science, 2012, 64: 1-7.
[15] 王宁, 刘敏, 庄忱, 等. 酸处理对玄武岩纤维微观结构和力学性能的影响[J]. 功能材料, 2013, 44(1): 84-87.
Wang N, Liu M, Zhuang C, et al. Effect of acid treatment on microstructure and mechanical properties of basalt fiber [J]. Functional Materials, 2013, 44 (1): 84-87 (in Chinese).
[16] 周正刚.高性能有机纤维表面等离子体改性研究[J]. 玻璃钢/复合材料, 2009, (1): 77-79.
Zhou Z G. Research on plasma surface modification of organic high-performance fiber [J]. Fiber Reinforced Plastics/Composites, 2009, (1): 77-79 (in Chinese).
[17] Kim M T, Kim M H, Rhee K Y, et al. Study on an oxygen plasma treatment of a basalt fiber and its effect on the inter laminar fracture property of basalt/epoxy woven composites[J]. Composites Part B, 2010, 42(3): 499-504.
[18] Kurniawan D, Kim B S, Lee H Y, et al. Atmospheric pressure glow discharge plasma polymerization for surface treatment on sized basalt fiber/polylactic acid composites[J]. Composites Part B (Engineering), 2012, 43(3): 1010-1014.
[19] 毕松梅, 朱钦钦. 离子体改性对玄武岩/聚丙烯复合材料性能的影响[J]. 产业用纺织品, 2013, (6): 32-35.
Bi S M, Zhu Q Q. Influence of plasma modification treatment on basalt[J]. Fiber/Polypropylene Composites Technical Textiles, 2013, (6): 32-35 (in Chinese).
[20] 乌云其其格. 偶联剂对玻璃纤维增强塑料的界面作用[J]. 玻璃钢/复合材料, 2000, (4): 12-15.
Wu Y Q Q G. Effect of coupling agent on the interface of glass fiber reinforced plastics[J]. Fiber Reinforced Plastics/Composites, 2000, (4): 12-15 (in Chinese).
[21] 刘亚兰, 申士杰, 许小芳, 等. 工艺参数对玄武岩连续纤维增强环氧树脂力学性能的影响[J]. 林业机械与木工设备, 2011, 39(2): 28-32.
Liu Y L, Shen S J, Xu X F, et al. Influence of process parameters on mechanical properties of basalt continuous fiber reinforced epoxy resin [J]. Forestry Machinery & Woodworking Equipment, 2011, 39(2): 28-32 (in Chinese).
[22] Rohchoon P, Jyongsik J. Impact behavior of aramid fiber/glass fiber hybrid composite: Evaluation of four-layer hybrid composites [J]. Journal of Materials Science, 2001, 36(9): 2359.
[23] 傅宏俊, 马崇启, 王瑞.玄武岩纤维表面处理及其复合材料界面改性研究[J]. 纤维复合材料, 2007, 24(3): 11-13.
Fu H J, Ma C Q, Wang R. Investigation on surface treatment of basalt-fiber and interfacial modification of composites[J]. Fiber Composites, 2007, 24(3): 11-13 (in Chinese).
[24] 宋秋霞, 刘华武, 钟智丽, 等. 硅烷偶联剂处理对玄武岩单丝拉伸性能的影响[J]. 天津工业大学学报, 2010, 29(1): 19-22.
Song Q X, Liu H W, Zhong H L, et al. Effect of silane coupling agent treatment on tensile properties of single basalt filament[J]. Journal of Tianjin Polytechnic University, 2010, 29(1): 19-22 (in Chinese).
[25] 张莉, 申世杰, 刘亚兰. 玄武岩纤维-酚醛树脂复合材料界面结合机理[J]. 宇航材料工艺, 2012, 42(3): 38-41.
Zhang L, Shen S J, Liu Y L. Mechanism of basalt fiber reinforced phenolic resin[J]. Aerospace Materials & Technology, 2012, 42(3): 38-41 (in Chinese).
[26] 洪晓东, 杨东旭, 邓恩燕. 改性玄武岩纤维增强环氧树脂复合材料的力学性能[J]. 工程塑料应用, 2013, 41(2): 20-24.
Hong X D, Yang D X, Deng E Y. Mechanical properties of basalt fiber with surface modification reinforced epoxy resin composites[J]. Engineering Plastics Application, 2013, 41(2): 20-24 (in Chinese).
[27] 王军杰. 玄武岩纤维表面纳米调控及其复合材料力学和摩擦磨损性能研究[D]. 太原:中北大学, 2018.
[28] Wei B, Song S H, Cao H I. Strengthening of basalt nano-SiO2-epoxy composite coating[J]. Materials and Design, 2011, 32(8-9): 4180-4186.
[29] 叶国锐, 晏义伍, 曹海琳. 氧化石墨烯改性玄武岩纤维及其增强环氧树脂复合材料性能[J]. 复合材料学报, 2014, 31(6): 1402-1408.
Ye G Y, Yan Y W, Cao H L. Basalt fiber modified with graphene oxide and properties of its reinforced epoxy composites[J]. Acta Materiae Compositae Sinica, 2014, 31(6): 1402-1408 (in Chinese).
[30] 张晓颖, 荣新山, 徐吉成, 等.玄武岩纤维表面改性对生物膜附着性能的影响[J]. 材料工程, 2019, 47(5): 129-136.
Zhang X Y, Rong X S, Xu J C, et al. Effect of surface modification of basalt fiber on biofilm attachment[J]. Journal of Materials Engineering, 2019, 47(5): 129-136 (in Chinese).
[31] 曹海琳, 张春红, 张志谦, 等.玄武岩纤维表面涂层改性研究[J]. 航空材料学报, 2007, (5): 77-82.
Cao H L, Zhang C H, Zhang Z Q, et al. Study on sizing modification of basalt fibers[J]. Journal of Aeronautical Materials, 2007, (5): 77-82 (in Chinese).
[32] 曹海琳, 晏义伍, 岳利培, 等. 玄武岩纤维[M]. 北京: 国防工业出版社, 2017.
[33] 陈国荣, 曹海琳, 姜雪, 等. 表面涂层对玄武岩连续纤维力学性能的影响[J]. 材料科学与工艺, 2011, 19(2): 19-22+27.
Chen G R, Cao H L, Jiang X, et al. Effect of exterior coating on the mechanical property of continuous basalt fiber[J]. Journal of Materials Science and Engineering, 2011, 19(2): 19-22+27 (in Chinese).
[34] 陈国荣, 曹海琳, 姜雪, 等. 纳米SiO2改性玄武岩纤维涂层浆料的制备及应用[J]. 涂料工业, 2010, 40(6): 29-32.
Chen G R, Cao H L, Jiang X, et al. Preparation and application of nano-SiO2 modified sizing for basalt fiber[J]. Paint & Coating Industry, 2010, 40(6): 29-32 (in Chinese).
[35] 魏斌. 玄武岩纤维的化学稳定性能及其涂层改性研究[D]. 哈尔滨: 哈尔滨工业大学, 2011.
[36] 靳婷婷, 申士杰, 李静, 等. 低温等离子处理对玄武岩纤维表面及复合材料性能的影响[J]. 玻璃钢/复合材料, 2015, (6): 29-35.
Jin T T, Shen S J, Li J, et al. Impact on the surface of basalt fiber and composite material properties of low-temperature plasma treatment[J]. Fiber Reinforced Plastics/
Composites, 2015, (6): 29-35 (in Chinese).
[37] 杨佳慧.玄武岩纤维的表面处理及其复合材料性能研究[D]. 上海: 东华大学, 2015.
[38] 柳力, 刘朝晖, 向宇, 等. 硅烷偶联剂改性玄武岩纤维的机理及其路用性能[J]. 建筑材料学报, 2017, 20(4): 623-629.
Liu Li, Liu Z H, Xiang Y, et al. Mechanism and road performance of basalt fiber modified by silane coupling agent[J]. Journal of Building Materials, 2019, 37(4): 612-618 (in Chinese).
[39] 曾瑶, 俞科静, 钱坤. 玄武岩纤维表面改性及界面效应[J]. 材料科学与工程学报, 2019, 37(4): 612-618.
Zeng Y, Yu K J, Qian K. Study on surface modification and interfacial effect of basalt fiber[J]. Journal of Materials Science and Engineering, 2019, 37(4): 612-618 (in Chinese).
[40] Afroz M, Patnaikuni I, Yenkatesan S, et al. Chemical durability and performance of modified basalt fiber in concrete medium [J]. Construction and Building Materials, 2017, 154: 191-203.
[41] Wang M C. Chemical durability and mechanical properties of alkali-proof basalt fiber and its reinforced epoxy composites[J]. Journal of Reinforced Plastics & Composites, 2008, 27(4): 393-407.
[42] Wu G, Wang X, Wu Z, et al. Durability of basalt ?bers and composites in corrosive environments[J]. Journal of Composite Materials, 2015, 49(7): 873-887.
[43] Schef?er C, F?rster T, M?der E, et al. Aging of alkali-resistant glass and basalt fibers in alkaline solutions: evaluation of the failure stress by Weibull distribution function[J]. Journal of Non-Crystalline Solids, 2009, 355: 52-54.
[44] Lee J J, Song J, Kim H. Chemical stability of basalt ?ber in alkaline solution[J]. Fibers and Polymers, 2014, 15 (11): 2329-2334.
[45] Myadaraboina H, Atmaja E S. Stability of basalt ?bers in concrete medium[C] // Raikar Memorial International Conference, Mumbai, India, 2015: 29-35.
[46] Zahra T, Negar H, Ali Z. Surface modification of basalt fibers by nanostructured silica aerogel[J]. Fibers and Polymers, 2018, 19(9): 1843-1849.
[47] Iorio M, Olmos D, Santarelli M L, et al. Fluorescence study of the hydrolytic degradation process of the polysiloxane coatings of basalt fibers[J]. Applied Surface Science, 2019, 475: 754-761.
[48] Iorio M, Santarelli M L, Gonz&lezfiaitano G, et al. Surface modification and characterization of basalt fibers as potential reinforcement of concretes[J]. Applied Surface Science, 2018, 427: 1248-1256.

相似文献/References:

[1]蒲 帅*,张 进,黎 帅.化学镀不溶性颗粒分散性的研究进展[J].电镀与精饰,2019,(8):29.[doi:10.3969/j.issn.1001-3849.2019.08.007]
 PU Shuai*,ZHANG Jin,LI Shuai.Research Progress on the Dispersion of Insoluble Particles of Electroless Plating[J].Plating & Finishing,2019,(10):29.[doi:10.3969/j.issn.1001-3849.2019.08.007]
[2]杨金梦,柳小祥,毕 俊,等.不锈钢双极板耐腐蚀涂层制备及性能[J].电镀与精饰,2021,(10):8.[doi:10.3969/j.issn.1001-3849.2021.10.002]
 YANG Jinmeng,LIU Xiaoxiang,BI Jun,et al.Preparation and Properties of Corrosion Resistance Coating on Stainless Steel Bipolar Plate[J].Plating & Finishing,2021,(10):8.[doi:10.3969/j.issn.1001-3849.2021.10.002]
[3]张彩芳,刘利利,赵文霞*,等. 焦磷酸钠含量对环氧树脂表面改性效果研究 [J].电镀与精饰,2022,(7):13.[doi:10.3969/j.issn.1001-3849.2022.07.003]
 ZHANG Caifang,LIU Lili,ZHAO Wenxia*,et al.Study on Surface Modification of Epoxy Resin by Sodium Pyrophosphate[J].Plating & Finishing,2022,(10):13.[doi:10.3969/j.issn.1001-3849.2022.07.003]
[4]杨林*,李文兵,赵雪飞.反应气体流量对机械传动轴表面涂层与性能的影响[J].电镀与精饰,2022,(12):32.[doi:10.3969/j.issn.1001-3849.2022.12.005]
 YANG Lin*,LI Wenbing,ZHAO Xuefei.Effect of Reaction Gas Flow on Surface Coating and Properties of Mechanical Transmission Shaft[J].Plating & Finishing,2022,(10):32.[doi:10.3969/j.issn.1001-3849.2022.12.005]
[5]禹露*,许婄鑫,罗志翔.A356铝合金的表面改性与耐磨及耐蚀性能研究[J].电镀与精饰,2024,(4):29.[doi:10.3969/j.issn.1001-3849.2024.04.005]
 Yu Lu*,Xu Peixin,Luo Zhixiang.Study on surface modification and wear and corrosion resistance of A356 aluminum alloy[J].Plating & Finishing,2024,(10):29.[doi:10.3969/j.issn.1001-3849.2024.04.005]

备注/Memo

收稿日期: 2020-04-09;修回日期: 2020-06-29
作者简介: 宋进朝(1981—),男,研究生学历,讲师,email:15938371957@163.com
通信作者: 韩文静,email: hanwenjing19850122@126.com
基金项目: 河南省高等学校青年骨干教师培养项目(2017GGJS295)

更新日期/Last Update: 2020-10-10