CHEN Yuhui,HAN Bing*,QI Qi,et al.Experimental Exploration of Plane Magnetic Particle Grinding Trajectory of Titanium Alloy[J].Plating & Finishing,2021,(1):1-6.[doi:10.3969/j.issn.1001-3849.2021.01.0010]
钛合金平面磁粒研磨轨迹的均匀性实验研究
- Title:
- Experimental Exploration of Plane Magnetic Particle Grinding Trajectory of Titanium Alloy
- 文献标志码:
- A
- 摘要:
- 为了获得更好的研磨加工质量和高效、高均匀度的加工效果，采用磁力研磨法，利用ADAMS模拟单颗磨粒运动轨迹，并运用数值计算对运动轨迹的均匀性作出评判。通过搭建实验平台，在不同条件下，对钛合金平面进行研磨抛光，获取其表面粗糙度的变化与加工时间的关系，并在加工区域取3点测量其表面粗糙度，探讨研磨轨迹的均匀性对加工平面粗糙度的影响。
- Abstract:
- In order to obtain better grinding quality and high-efficiency and high-uniformity processing effect, this paper uses magnetic grinding method, simulates the movement track of single abrasive particle by ADAMS, and evaluates the uniformity of track by numerical calculation. An experimental platform was set up to determine the grinding and polishing of titanium plane under various experimental conditions. The relationship between the change of surface roughness and processing time was obtained, and the surface roughness was measured at three points in the processing area. Thus, the influence of the uniformity of grinding track on the flatness of the processing plane was discussed.
参考文献/References:
[1] 姬孟托, 洪滔, 文东辉, 等. 无理数转速比下的平面研磨轨迹均匀性研究[J]. 机电工程, 2016, 33（5）: 532-536.
Ji M T, Hong T, Wen D H, et al. Analytical study on uniformity of path distribution with irrational rotational speed ratio in plan lapping process[J]. Journal of Mechanical Electrical Engineering, 2016, 33（5）: 532-536 （in Chinese）.
[2] 王琦. 平面研磨轨迹的研究[J]. 机械工程师, 2012（5）: 149-150.
Wang Q. Research on plane grinding trajectory[J]. Mechanical Engineer, 2012（5）: 149-150 （in Chinese）.
[3] 焦安源, 李宗泽, 邹艳华. 基于恒压的平面磁力研磨效果分析[J]. 制造技术与机床, 2014（8）: 37-41.
Jiao A Y, Li Z Z, Zou Y H. Analysis of plane magnetic grinding effect based on constant pressure[J]. Manufacturing Technology and Machine Tool, 2014（8）: 37-41 （in Chinese）.
[4] 张萍萍, 张桂香, 赵玉刚, 等. SUS304不锈钢平面磁力研磨加工试验研究[J]. 山东理工大学学报（自然科学版）, 2011, 25（5）: 103-105.
Zhang P P, Zhang G X, Zhao Y G, et al. Experimental research on plate magnetic abrasive finishing of stainless steel SUS304[J]. Journal of Shandong University of Technology （Natural Science Edition）, 2011, 25（5）: 103-105 （in Chinese）.
[5] 焦安源, 全洪军, 邹艳华. 平面研磨中磁粒刷运动轨迹规划的试验研究[J]. 机械设计与制造, 2015（10）: 84-87.
Jiao A Y, Quan H J, Zou Y H. Experimental study on planning the trajectory of magnetic abrasive brush in plane finishing [J]. Machinery Design and Manufacture, 2015（10）: 84-87 （in Chinese）.
[6] 郁炜, 吕冰海, 姚蔚峰, 等. 基于ADAMS的球体双自转研磨方式下研磨盘转速优化研究[J]. 中国机械工程, 2013, 24（7）: 866-872+881.
Yu W, Lu B H, Yao W F, et al. Speed optimization for lapping plates in RDP lapping mode base on ADAMS[J]. China Mechanical Engineering, 2013, 24（7）: 866-872+881 （in Chinese）.
相似文献/References:
[1]许召宽,韩 冰,陈 燕,等.基于电解-磁力复合研磨法的表面光整加工[J].电镀与精饰,2018,(12):7.[doi:10.3969/j.issn.1001?3849.2018.12.002]
XU Zhaokuan,HAN Bing,CHEN Yan,et al.Surface Finishing Based on Electrolysis-Magnetic Force Composite Grinding Method[J].Plating & Finishing,2018,(1):7.[doi:10.3969/j.issn.1001?3849.2018.12.002]
[2]王 杰,陈 燕*,吕旖旎,等.开槽仿形磁极在轴承内圈滚道光整中的应用[J].电镀与精饰,2020,(5):32.[doi:10.3969/j.issn.1001-3849.2020.05.0050]
WANG Jie,CHEN Yan*,LV Yini,et al.Application of Slotted Profiling Magnetic Pole in Bearing Inner Ring Groove Finishing[J].Plating & Finishing,2020,(1):32.[doi:10.3969/j.issn.1001-3849.2020.05.0050]
[3]于克强*,周 锟,陈 燕.超声波辅助磁力研磨整体叶盘试验研究[J].电镀与精饰,2020,(7):42.[doi:10.3969/j.issn.1001-3849.2020.07.0090]
YU Keqiang*,ZHOU Kun,CHEN Yan.Experimental Study on Blisk by Ultrasonic Vibration Assisted MAF[J].Plating & Finishing,2020,(1):42.[doi:10.3969/j.issn.1001-3849.2020.07.0090]
[4]刘 宁,张桂香*,陈昊鑫,等.基于响应曲面法的磁力研磨310S不锈钢参数优化[J].电镀与精饰,2023,(6):77.[doi:10.3969/j.issn.1001-3849.2023.06.013]
Liu Ning,Zhang Guixiang*,Chen Haoxin,et al.Parameter optimization of magnetic abrasive finishing 310S stainless steel based on response surface methodology[J].Plating & Finishing,2023,(1):77.[doi:10.3969/j.issn.1001-3849.2023.06.013]
[5]吴 冬 *,张亚光,高军帅,等.航空发动机圆板槽壁重熔层去除研究[J].电镀与精饰,2023,(11):9.[doi:10.3969/j.issn.1001-3849.2023.11.002]
Wu Dong*,Zhang Yaguang,Gao Junshuai,et al.Research on remelting layer removal of circular plate groove wall of aeroengine[J].Plating & Finishing,2023,(1):9.[doi:10.3969/j.issn.1001-3849.2023.11.002]
[6]于克强*,周锟,靳铁辉,等.电解辅助磁力研磨整体叶盘试验研究[J].电镀与精饰,2024,(4):46.[doi:10.3969/j.issn.1001-3849.2024.04.007]
Yu Keqiang*,Zhou Kun,Jin Tiehui,et al.Experimental study on blisk by electrolysis assisted MAF[J].Plating & Finishing,2024,(1):46.[doi:10.3969/j.issn.1001-3849.2024.04.007]
备注/Memo
收稿日期：2019-07-15；修回日期：2020-03-20作者简介：陈宇辉，男，硕士生，email：136058505@qq.com通信作者：韩冰，email：hanb75@126.com-