ZHAN Zhongwei,GE Yulin TIAN Lixi*,WANG Shuaixing,et al.Effect of Stirring Speed and Particle Size on the Particle Content in the Ni-cBN Composite Plating and Its Mechanism[J].Plating & Finishing,2022,(1):1-5.[doi:10.3969/j.issn.1001-3849.2022.01.001]
搅拌速度和颗粒尺寸对复合电沉积Ni-cBN复合量的影响及机理分析
- Title:
- Effect of Stirring Speed and Particle Size on the Particle Content in the Ni-cBN Composite Plating and Its Mechanism
- Keywords:
- composite electrodeposition; cBN; nickel; titanium alloy; stirring speed
- 分类号:
- TG174.453
- 文献标志码:
- A
- 摘要:
- 决定金属-陶瓷复合耐磨镀层摩擦学性能最为关键的因素是硬质强化颗粒的尺寸和含量。通过分别选用两种粒径的cBN颗粒，在氨基磺酸镀镍液中电沉积Ni-cBN复合镀层，研究搅拌速度和颗粒粒径对复合量的影响规律，并对其影响机理进行分析。研究结果显示，随搅拌速度的增加，两种粒径的cBN颗粒的复合量均呈现先升高后降低的趋势，且在搅拌速度偏高时，较大粒径cBN颗粒的复合量的下降趋势更加明显。从搅拌速度、颗粒粒径、复合量三者之间的关系分析，颗粒与电沉积金属层之间不是单纯依靠机械结合，两者之间应该存在一定的界面作用力，使得在镀层厚度与颗粒粒径之比很小时，颗粒就能被镀层捕获。
- Abstract:
- Frictional properties of metal-ceramic composite wear-resistant coatings are significantly determined by the size and content of strengthening particles. The effect of stirring speed on the particle content in the Ni-cBN composite plating was investigated in a solution based on nickel sulphamate by using cBN particles with two kinds of particle sizes， and the related mechanism was analyzed. The results showed that， with increasing of stirring speed， the particle content showed an initial rise and then decreased. When the stirring speed was higher， the decrease trend of cBN particles with larger size was more obvious. From the analysis of the relationship along stirring speed， particle size and composite amount， it was found that the ceramic particles were not just mechanically bonded with the electrodeposited metal. There should be interfacial force between them， so that the particles could be captured when the ratio of coating thickness to particle size was very small
参考文献/References:
[1] 舒绪刚, 何湘柱, 黄慧民, 等. 纳米复合电沉积技术研究进展[J]. 材料保护, 2007(7): 60-63.
Shu X G, He X Z, Huang H M, et al. Development of the research on nano-composite electrodeposition[J]. Materials Protection, 2007(7): 60-63 (in Chinese).
[2] 朱诚意, 郭忠诚. 国内复合镀层最新进展及应用[J]. 电镀与环保, 1998, 18(1): 3-7.
Zhu C Y, Guo Z C. The latest domestic progress and application of the composite plating[J]. Electroplating and Pollution Control, 1998, 18(1): 3-7 (in Chinese).
[3] 梅明亮, 王翠凤, 王詠证. 脉冲电镀制备Ni-cBN复合镀层的性能[J]. 材料保护, 2016, 49(2): 46-49.
Mei M L, Wang C F, Wang Y Z. Properties of electrodeposited Ni-cBN composite coatings by pulsed power supply[J]. Materials Protection, 2016, 49(2): 46-49 (in Chinese).
[4] 王翠凤, 邱锡荣, 李泓原, 等. Ni-cBN复合镀层制备工艺参数对性能的影响[J]. 中国有色金属学报, 2012, 22(12): 3511-3521.
Wang C F, Qiu X R, Li H Y, et al. The influence of the preparing parameters on the properties of the Ni-cBN composite plating [J]. Transactions of Nonferrous Metals Society of China, 2012, 22(12): 3511-3521 (in Chinese).
[5] 魏志坚. TC11钛合金压气机盘等温锻造工艺研究[J]. 金属加工(热加工), 2003(3): 45-46.
Wei Z J. Research on the isothermal forging of the compressor disk made of TC11 titanium alloy[J]. Machinist Metal Forming, 2003(3): 45-46 (in Chinese).
[6] 李家明, 徐淑庆, 梁铭忠. 复合电镀机制的研究进展[J]. 电镀与环保, 2016, 36: 1-3.
Li J M, Xu S Q, Liang M Z. Progress of the research on the mechanism of composite electroplating[J]. Electroplating and Pollution Control, 2016, 36: 1-3 (in Chinese).
[7] 黄可迪, 冯艳, 马如龙, 等. Co和P对Ni-金刚石复合电沉积机理的影响[J]. 有色金属科学与工程, 2017, 8(6): 43-50.
Huang K D, Feng Y, Ma R L, et al. Influence of Co and P on the mechanism of the Ni-diamond composite electroplating[J]. Nonferrous Metals Science and Engineering, 2017, 8(6): 43-50 (in Chinese).
[8] 冯秋元, 李廷举, 金俊泽. 复合电镀机理研究及最新进展[J]. 稀有金属材料与工程, 2007, 36(3): 559-563.
Feng Q Y, Li T J, Jin J Z. Research and the latest progress on the mechanism of composite electroplating[J]. Rare Metal Materials and Engineering, 2007, 36(3): 559-563 (in Chinese).
[9] Wu G, Li N , Wang D L, et al. A Kinetic Model for the electrolytic codeposition of α-Al2O3 particles with Co-Ni alloy[J]. Acta Physico-Chimica Sinica, 2003, 19(11): 996-1000.
[10] 郭鹤桐, 张三元. 复合镀层[M]. 天津: 天津大学出版社, 1991.
[11] 丁雨田, 许广济, 戴雷, 等. 铝合金表面电沉积 Ni-SiC复合镀层的研究[J]. 机械工程学报, 2003, 39(1) : 128-132.
Ding Y T, Xu G J, Dai L, et al. Research on the electrodeposition of Ni-SiC composite plating on aluminum alloy[J]. Journal of Mechanical Engineering, 2003, 39(1): 128-132 (in Chinese).
[12] 杜楠, 周海飞, 赵晴, 等. Ni-金刚石复合电沉积的界面作用力及其对复合量的影响[J]. 材料工程, 2008(2): 23-26.
相似文献/References:
[1]田佩佩,牛宗伟*,刘可峰,等.电流密度对超疏水Ni-MoS2-Al2O3复合镀层润湿性的影响[J].电镀与精饰,2021,(10):14.[doi:10.3969/j.issn.1001-3849.2021.10.003]
TIAN Peipei,NIU Zongwei*,LIU Kefeng,et al.Effect of Current Density on Wettability of Superhydrophobic Ni-MoS2-Al2O3 Composite Coating[J].Plating & Finishing,2021,(1):14.[doi:10.3969/j.issn.1001-3849.2021.10.003]
[2]张帮彦*,董家键,郑世杰,等.复合电沉积陶瓷颗粒增强金属基复合涂层研究进展[J].电镀与精饰,2023,(1):46.[doi:10.3969/j.issn.1001-3849.2023.01.008]
Zhang Bangyan*,Dong Jiajian,Zheng Shijie,et al.Research progress on the ceramic particle reinforced metal matrix composite coatings prepared by composite electrodeposition[J].Plating & Finishing,2023,(1):46.[doi:10.3969/j.issn.1001-3849.2023.01.008]
[3]收稿日期： 0-0- 修回日期： 0-0-8.Ni-Sn / MoO2 复合电极的制备及析氢性能研究[J].电镀与精饰,2024,(11):36.
Preparation and hydrogen evolution performance of Ni-Sn/MoO 2 composite electrodes Zhu Zirui Xing Lehong * Zhao Yutong Zuo Yue Sun Chenyang Hao Yungui Fu Xiaotong[J].Plating & Finishing,2024,(1):36.
备注/Memo
收稿日期： 2020-12-23 修回日期： 2021-03-08 通信作者： 田礼熙（1983－），男，博士研究生，讲师，email：70682@nchu.edu.cn 基金项目： 江西省自然科学基金面上项目（20192BAB206005）；国家科技重大专项（2017-VII-0012-0109）