LI Yuanhui*,LEI Yuanyuan,HUANG Bifang,et al.Study on Inert Anode Organization and Properties of Different Pretreatment Aluminum-Based Lead Alloys[J].Plating & Finishing,2022,(7):8-12.[doi:10.3969/j.issn.1001-3849.2022.07.002]
不同预处理铝基铅合金惰性阳极组织和性能研究
- Title:
- Study on Inert Anode Organization and Properties of Different Pretreatment Aluminum-Based Lead Alloys
- 分类号:
- TG174.451
- 文献标志码:
- A
- 摘要:
- 鉴于铝基体优越的导电性、强度比和耐氧化酸性，新型铝基铅合金惰性阳极材料已经成为湿法冶金阳极材料研究热点之一。本文将研究轧制、铝基界面镀锡和阳极氧化、表面压花等不同处理工艺对Al/Pb-0.3%Ag惰性阳极组织和综合使用性能的影响。结果表明，不同处理工艺对Al/Pb-0.3%Ag合金阳极组织形貌、力学性能、界面相容、电化学腐蚀以及表面物相组成有着不同的影响。其中阳极氧化-轧制-压花处理Al/Pb-0.3%Ag合金阳极晶粒细小均匀，界面相容好，具有良好机械性能和电化学耐蚀性能。
- Abstract:
- Due to the excellent conductivity， strength ratio and resistance to oxidizing acid of aluminum matrix， new composite lead alloys inert anodes on aluminum substrates have become one of the research hotspots in hydrometallurgy. In this paper， the effects on the microstructure and comprehensive performance of Al/pb-0.3%Ag inert anodes were studied in rolled， tin plated and anodized to interface and surface embossing pretreatment process. The results show that different pretreatment processes have different effects on the morphology， mechanical properties， interfacial compatibility， electrochemical corrosion and surface phase composition of Al/Pb-0.3% Ag composite inert anodes. The Al/Pb-0.3% Ag composite inert anodes prepared by anodized-rolled-embossed have fine and uniform grain size， good interface compatibility， good mechanical properties and electrochemical corrosion resistance
参考文献/References:
[1] 庄思伟, 吴冰, 段宁, 等. 锌电沉积阳极的研究进展[J]. 复合材料学报, 2021, 38(5): 1313-1330.
[2] Lafront A, Zhang W, Ghali E, et al. Electrochemical noise studies of the corrosion behavior of lead anodes during zinc electro-winning maintenance[J]. Electrochimica Acta, 2010, 55(22): 6665-6675.
[3] Zhang Y C, Chen B M, Guo Z C, et al. Electrochemical properties and microstructure of Al/Pb-Ag and Al/Pb-Ag-Co anodes for zinc electrowinning[J]. Acta Metallurgica Sinica, 2014, 27(2): 331-337.
[4] Xu R D, Huang L P, Zhou J F. Effects of tungsten carbide on electrochemical properties and microstructural features of Al/Pb-PANI-WC composite inert anodes used in zinc electrowinning[J]. Hydrometallurgy, 2012, 125/126: 8-15.
[5] Han Z H, Zhu P X, Liu J.H, et al. Preparation and properties of Pb/Sn/Al laminated composite anode for zinc electrowinning[J]. RSC Advances, 2018, 8(51): 29147-29154.
[6] Zhou X Y, Wang S, Ma C Y, et al. Effect of Ag content and β-PbO2 plating on the properties of Al/Pb-Ag alloy[J]. Rare Metal Materials and Engineering, 2018, 47(7): 1999-2004.
[7] 汪世川, 王腾, 闫文凯, 等. 不同浓度盐酸刻蚀对钛基锡锑钌氧化物涂层电极活性和寿命的影响[J]. 材料保护, 2019, 52(1): 59-64.
[8] 李建平, 姜洪锋, 毛大恒, 等. 轧制变形量对铸轧铅合金板带性能的影响[J]. 材料工程, 2012, 4: 17-21.
[9] 李劼, 钟晓聪, 蒋良兴, 等. 铅合金微观结构对其腐蚀行为的影响[J]. 功能材料, 2015, 46(5): 26-31.
[10] Zhang Y C, Chen B M, Yang H T, et al. Anodic behavior and microstructure of Al/Pb-Ag-Co anode during zinc electr-owinning[J]. Journal of Central South University, 2014, 21: 83-88.
相似文献/References:
[1]胡素荣?,邓三平,唐 曦.含氰电镀废液的电化学氧化预处理研究[J].电镀与精饰,2020,(8):43.[doi:10.3969/j.issn.1001-3849.2020.08.0090]
HU Surong,DENG Sanping,TANG Xi.Study on Electrochemical Oxidation Pretreatment of Cyanide-Containing Electroplating Wastewater[J].Plating & Finishing,2020,(7):43.[doi:10.3969/j.issn.1001-3849.2020.08.0090]
[2]党在清*.镁合金复合镀层的制备及其结构与性能表征[J].电镀与精饰,2020,(11):16.[doi:10.3969/j.issn.1001-3849.2020.11.0040]
DANG Zaiqing*.Study on the Structure and Properties of Composite Coating on Magnesium Alloy[J].Plating & Finishing,2020,(7):16.[doi:10.3969/j.issn.1001-3849.2020.11.0040]
备注/Memo
收稿日期： 2021-11-08 修回日期： 2022-04-19 作者简介： 李远会（1976 -），贵州遵义人，硕士，副教授，从事材料表面改性研究。Email：1319427147@qq.com