YE Ping*,ZHOU Qian,DONG Liang.叶 萍1*,周 倩2,董 良3[J].Plating & Finishing,2021,(2):28-33.[doi:10.3969/j.issn.1001-3849.2021.02.0060]
屏蔽罩超声辅助电镀Ni-Co/SiO2复合镀层的耐蚀性研究
- Title:
- 叶 萍1*,周 倩2,董 良3
- 关键词:
- 耐蚀性; 表面形貌; 显微结构; Ni-Co/SiO2复合镀层; 屏蔽罩
- Keywords:
- corrosion resistance surface morphology microstructure Ni-Co/SiO2 composite coating shielding cover
- 文献标志码:
- A
- 摘要:
- 在电子元件常用的屏蔽罩表面电镀Ni-Co/SiO2复合镀层,并施加超声波以强化电镀过程。研究了超声波功率对镀层中SiO2颗粒含量以及镀层表面形貌、显微结构和耐蚀性的影响。结果表明:适当提高超声波功率有利于改善镀层表面形貌,并提高镀层中SiO2颗粒含量,使镀层表现出越来越好的耐蚀性。但超声波功率超过一定范围后,镀层中SiO2含量下降,镀层表面形貌也随之变差,导致耐蚀性下降。超声波功率提高对镀层衍射峰的数量、位置以及晶格常数基本没有影响。当超声波功率为240 W时,镀层表面形貌和耐蚀性相对最好,该镀层适合应用在屏蔽罩上,有望进一步改善屏蔽罩的耐蚀性。
- Abstract:
- Ni-Co/SiO2 composite coating was electroplated on the surface of shielding cover commonly used for electronic components, and ultrasonic was applied to enhance the electroplating process. The influences of ultrasonic power on the content of SiO2 particles in the coating, as well as the surface morphology, microstructure and corrosion resistance of the coating were studied. The results showed that appropriate increase of ultrasonic power was beneficial to improve the surface morphology of the coating, increase the content of SiO2 particles in the coating, and make the coating show better corrosion resistance. However, when the ultrasonic power exceeded a certain range, the content of SiO2 in the coating decreased, and the surface morphology of the coating deteriorated, resulting in the decline of corrosion resistance. The increase of ultrasonic power had no influence on the number and position of diffraction peaks and the lattice constant of the coatings. When the ultrasonic power was 240 W, the coating possessed much better surface morphology and corrosion resistance, which was suitable to be applied on the shielding cover in order to further improve the corrosion resistance of the shielding cover.
参考文献/References:
[1] 戴国勇. 1J50软磁合金筒形件流动旋压成形方法研究[D]. 广州: 华南理工大学, 2016.
[2] 冯筱珺, 阚洪敏, 魏晓冬, 等. 电沉积制备镍基复合镀层的研究进展[J]. 表面技术, 2017, 46(5): 75-82.
Feng X J, Kan H M, Wei X D, et al. Research progress of Ni-based composite coatings prepared by electrodeposition[J]. Surface Technology, 2017, 46(5): 75-82 (in Chinese).
[3] Bostani B, Ahmadi N P, Yazdani S, et al. Co-electrodeposition and properties evaluation of functionally gradient nickel coated ZrO2 composite coating[J]. Transactions of Nonferrous Metals Society of China, 2018, 28(1): 66-76.
[4] Shanmugasamy S, Balakrishnan K, Subramania A. Development of CeO2 nanorods reinforced electrodeposited nickel nanocomposite coating and its tribological and corrosion resistance properties[J]. Journal of Rare Earths, 2018, (12): 1319-1325.
[5] 李保松, 张文, 环宇星, 等. 海工机械Ni-Co/SiC纳米复合镀层微观结构及耐蚀性能[J]. 稀有金属材料与工程,2018, 47(5): 1509-1516.
Li B S, Zhang W, Huan Y X, et al.Microstructure and corrosion resistance of Ni-Co/SiC nanocomposite coating for marine machinery[J]. Rare Metal Materials and Engineering, 2018, 47(5): 1509-1516 (in Chinese).
[6] 魏欣, 孙玥, 戴懿. 超声波辅助化学镀镍-钨合金镀层性能的研究[J]. 电镀与环保, 2018, 38(6): 54-56.
Wei X, Sun Y, Dai Y. Study on properties of Ni-W alloy coatings prepared by ultrasonic-assisted electroless deposition[J]. Electroplating & Pollution Control, 2018, 38(6): 54-56 (in Chinese).
[7] Jin H, Chen L J, Zhou X Y, et al. Effect of ultrasonic power on corrosion resistance and hardness of Ni-Co-Al2O3 nanocomposite coatings[J]. Metalurgija, 2018, 57(4): 269-271.
[8] 宋畅. 减小微电铸层残余应力的机理与方法[D]. 大连:大连理工大学, 2018.
[9] Gyawali G, Lee S W. Effect of SiC and h/BN codeposition on microstructural and tribological properties of Ni-SiC-h/BN composite coatings[J]. Journal of Ceramic Processing Research, 2015, 16(2): 213-217.
[10] 张岩, 马春阳, 夏法锋. 脉冲电沉积Ni-SiC纳米复合镀层耐磨性的研究[J]. 电镀与环保, 2019, 39(4): 10-12.
Zhang Y, Ma C Y, Xia F F. Study on wear resistance of Ni-SiC nano-composite coatings prepared by pulse electrodeposition[J]. Electroplating & Pollution Control,2019, 39(4): 10-12 (in Chinese).
[11] Fan H, Zhao Y P, Wang S K, et al. Effect of jet electrodeposition conditions on microstructure and mechanical properties of Cu-Al2O3 composite coatings[J]. The International Journal of Advanced Manufacturing Technology, 2019, (105): 4509-4516.
[12] 何杰, 吴蒙华, 贾卫平. Ni-ZrO2-CeO2二元纳米复合镀层摩擦磨损及耐蚀性研究[J]. 功能材料, 2018, 49(1):1102-1107.
He J, Wu M H, Jia W P. Corrosion resistance and tribological properties of Ni-ZrO2-CeO2 binary nano composite coatings[J]. Journal of Functional Materials, 2018, 49(1): 1102-1107 (in Chinese).
相似文献/References:
[1]宿 辉,栾柏瑞.AZ91D镁合金表面无铬无氟前处理工艺研究[J].电镀与精饰,2019,(1):10.[doi:10.3969/j.issn.1001-3849.2019.01.003]
XU Hui,LUAN Bairui.Study on Chromium?Free and Fluorine?Free PretreatmentProcess of AZ91D Magnesium Alloy[J].Plating & Finishing,2019,(2):10.[doi:10.3969/j.issn.1001-3849.2019.01.003]
[2]徐美玲,亢淑梅,陈婷婷,等.添加氯化铈对镁合金Ni?P化学镀镀层性能影响[J].电镀与精饰,2019,(1):37.[doi:10.3969/j.issn.1001-3849.2019.01.008]
XU Meiling,KANG Shumei,CHEN Tingting,et al.Properties of Electroless Plating Ni?P on Magnesium AlloySubstrate by Adding CeCl3[J].Plating & Finishing,2019,(2):37.[doi:10.3969/j.issn.1001-3849.2019.01.008]
[3]刘冬冬,韩 冰,陈 燕,等.GCr15轴承内圈磁粒研磨光整实验[J].电镀与精饰,2019,(7):1.[doi:10.3969/j.issn.1001-3849.2019.07.001]
LIU Dongdong,HAN Bing,CHEN Yan,et al.Experimental Study on GCr15 Bearing Inner Ring Magnetite Grinding and Finishing[J].Plating & Finishing,2019,(2):1.[doi:10.3969/j.issn.1001-3849.2019.07.001]
[4]刘军松,刘定富,苏 琪,等.有机添加剂对电镀Zn-Ni-P合金的影响[J].电镀与精饰,2019,(7):6.[doi:10.3969/j.issn.1001-3849.2019.07.002]
LIU Junsong,LIU Dingfu,SU Qi,et al.Effect of Organic Additives on Zn-Ni-P Alloy Electroplating[J].Plating & Finishing,2019,(2):6.[doi:10.3969/j.issn.1001-3849.2019.07.002]
[5]颜晨曦,宋娟娟,曹建平,等.全氢聚硅氮烷涂层制备及其性能[J].电镀与精饰,2019,(7):14.[doi:10.3969/j.issn.1001-3849.2019.07.004]
YAN Chenxi,SONG Juanjuan,CAO Jianping,et al.Preparation and Properties of Perhydropolysilazane Coating[J].Plating & Finishing,2019,(2):14.[doi:10.3969/j.issn.1001-3849.2019.07.004]
[6]李佳霖,郝建军,牟世辉.Fe2+对镁合金电化学磷化改性研究[J].电镀与精饰,2019,(10):1.[doi:10.3969/j.issn.1001-3849.2019.10.001]
LI Jialin,HAO Jianjun,MOU Shihui.Study on Electrochemical Phosphating Modification of Magnesium Alloy by Fe2+[J].Plating & Finishing,2019,(2):1.[doi:10.3969/j.issn.1001-3849.2019.10.001]
[7]雷同鑫,鞠 辉,张长科,等.电镀Ni-W-P合金在钻杆接头上的应用[J].电镀与精饰,2019,(10):38.[doi:10.3969/j.issn.1001-3849.2019.10.009]
LEI Tongxin,JU Hui,ZHANG Changke,et al.Application of Ni-W-P Alloy Prepared by Electroplating to Tool Joints[J].Plating & Finishing,2019,(2):38.[doi:10.3969/j.issn.1001-3849.2019.10.009]
[8]贾启华,许晓娟*.沉积时间对镁合金化学镀镍的影响[J].电镀与精饰,2019,(12):1.[doi:10.3969/j.issn.1001-3849.2019.12.001]
JIA Qihua,XU Xiaojuan*.Effect of Deposition Time on Direct Electroless Plating of Magnesium Alloys[J].Plating & Finishing,2019,(2):1.[doi:10.3969/j.issn.1001-3849.2019.12.001]
[9]赵 杨,陈 燕*,程 淼,等.电磁场作用下球形磁极辅助研磨弯管内表面研究[J].电镀与精饰,2020,(1):22.[doi:10.3969/j.issn.1001-3849.2020.01.005]
ZHAO Yang,CHEN Yan*,CHENG Miao,et al.Study on the Inner Surface Finishing of Bend Pipe by Electromagnetic Fields Drive Spherical Magnetic Pole[J].Plating & Finishing,2020,(2):22.[doi:10.3969/j.issn.1001-3849.2020.01.005]
[10]肖长江*,陈贻光,栗晓龙.镀膜金刚石与铜基结合剂间把持力提高方法探讨[J].电镀与精饰,2020,(2):15.[doi:10.3969/j.issn.1001-3849.2020.02.004]
XIAO Changjiang*,CHEN Yiguang,LI Xiaolong.Discussion on Improving the Holding Force Between Coated-Diamond and Cu-Matrix Binder[J].Plating & Finishing,2020,(2):15.[doi:10.3969/j.issn.1001-3849.2020.02.004]
[11]姚知深,牛宗伟*,刘 斌,等.超声振动对65钢电解磷化膜表面形貌与耐蚀性的影响[J].电镀与精饰,2019,(9):24.[doi:10.3969/j.issn.1001-3849.2019.09.005]
YAO Zhishen,NIU Zongwei*,LIU Bin,et al.Effect of Ultrasonic Vibration on Surface Morphology and Corrosion Resistance of 65 Steel Electrolytic Phosphating Film[J].Plating & Finishing,2019,(2):24.[doi:10.3969/j.issn.1001-3849.2019.09.005]
备注/Memo
收稿日期: 2020-08-14;修回日期: 2020-10-15
作者简介: 叶萍(1969—),女,本科,高级工程师。email:education_810@163.com
基金项目: 黑龙江省普通本科高等学校青年创新人才培养计划(UNPYSCT-2017152);黑龙江省高等教育教学改革项目(SJGY20190726)