QIU Shanghuang.Analysis of Warping Factors of Composite Materials in Coating[J].Plating & Finishing,2021,(4):48-51.[doi:10.3969/j.issn.1001-3849.2021.04.011]
复合材料在涂布中的翘曲因素分析
- Title:
- Analysis of Warping Factors of Composite Materials in Coating
- 文献标志码:
- A
- 摘要:
- 本文从张力拉伸、穿膜方式等工艺因素，辊径曲率、导辊导入位置等设备因素，以及基材热收缩、胶黏剂体系等原材料因素，综合分析引起复合材料在涂布过程产生翘曲的影响因素。翘曲问题的产生和解决往往都是多方面的，实际工艺技术人员和生产人员需要结合现场，做出最优的方案。
- Abstract:
- In this paper, the influence factors of composite materials warping in the coating process was analyzed from the technological factors of tension stretching and film piercing, the equipment factors of roll curvature and guide roll position, the material factors of thermal shrinkage and adhesives. The results showed that the generation and solution of warping problem were multifaceted, the technicians and producers needed to determine the optimal scheme according to the actual situation.
参考文献/References:
[1] 吕建波. PET光学膜紫外光固化硬涂层的制备[J]. 影像科学与光化学, 2011, 29(6): 449-455.
Lu J B. The preparation of UV curable hard coatings on PET [J]. Imaging Science and Photochemistry,2011, 29(6): 449-455 (in Chinese).
[2] 陈洪立, 焦晓宁, 柯鹏. 取向增强复合锂离子电池隔膜的制备及其性能[J]. 纺织学报, 2018, 39(7): 8-14.
Chen H L, Jiao X N, Ke P. Preparation and properties of orientation reinforced composite separator for lithium-ion battery [J]. Journal of Textile Research, 2018, 39(7): 8-14 (in Chinese).
[3] 张艳, 王俊环. 背板用聚氨酯胶黏剂性能研究[J]. 信息记录材料, 2018, 19(7): 47-50.
Zhang Y, Wang J H. Study on properties of polyurethane adhesive for backsheet [J]. Information Recording Materials, 2018, 19(7): 47-50 (in Chinese).
[4] 李福球, 林松盛, 林凯生. 离子镀硬质装饰膜的发展与现状[J]. 电镀与涂饰, 2016, 15: 817-822.
Li F Q, Lin S S, Lin K S. Development and current status of decorative ion-plated hard films [J]. Electroplating & Finishing, 2016, 15: 817-822 (in Chinese).
[5] Grosshans H, Papalexandris M V. Numerical study of the influence of the powder and pipe properties on electrical charging during pneumatic conveying [J]. Powder Technology, 2017, 315: 227-235.
[6] 肖桂花, 李好义, 李小虎, 等. 流体微分静电纺丝喷头设计的研究进展[J]. 纺织学报, 2014, 35(12): 153-158.
Xiao G H, Li H Y, Li X H, et al. Research progress of fluid differential electrostatic spinning nozzle design [J]. Journal of Textile Research, 2014, 35(12): 153-158 (in Chinese).
[7] 邱尚煌, 白梅, 李刚, 等. 涂布生产中的静电隐患区域及预防[J]. 上海纺织科技, 2019, 12: 35-38.
Qiu S H, Bai M, Li G, et al. Potential electrostatic hazard areas and preventive measures in coating production process [J]. Shanghai Textile Science & Technology, 2019, 12: 35-38.
[8] 齐淑娥. 拉伸弯曲矫直过程中带钢对弯曲辊包角的理论计算[J]. 河北冶金, 2014, 2: 17-20.
Qi S E. Theoretical Calculation for Contact Angle of Strip Steel Around Bending Roll in Tension, Bending and Straightening [J]. Hebei Metallurgy, 2014, 2: 17-20 (in Chinese).
[9] 邱尚煌, 白梅, 张彦, 等. 涂布过程起皱原因分析及对策[J]. 棉纺织技术, 2018, 46(12): 71-74.
Qiu S H, Bai M, Zhang Y, et al. Cause analysis and countermeasure of creping in coating process [J]. Cotton Textile Technology, 2018, 46(12): 71-74 (in Chinese).
[10] 杨智能, 张龙, 李志刚. 塑料薄膜热收缩率测试方法[J]. 机械, 2012, 8: 70-73.
Yang Z N, Zhang L, Li Z G. The testing method of heat shrinkage of plastic film [J]. Machinery, 2012, 8: 70-73 (in Chinese).
[11] 杨玉昆, 吕凤亭. 压敏胶制品技术手册[M]. 北京: 化学工业出版社. 2004: 411-422.
[12] Wisnom M R, Gigliotti M, Ersoy N. Mechanisms generating residual stresses and distortion during manufacture of polymermatrix composite structures [J]. Composites Parts A: Applied Science and Manufacturing, 2006(37): 522-529.
相似文献/References:
[1]张自勤,牛斌娜,李豪杰,等.碲化铋基热电材料复合改性的研究进展[J].电镀与精饰,2021,(11):48.[doi:10.3969/j.issn.1001-3849.2021.11.009]
ZHANG Ziqin,NIU Binna,LI Haojie,et al.Research Progress in Composite Modification of Bismuth Telluride Based Thermoelectric Materials[J].Plating & Finishing,2021,(4):48.[doi:10.3969/j.issn.1001-3849.2021.11.009]
[2]张晓蕊,郭 佳,丁连帅,等.电化学方法制备碳纳米管/金属复合材料研究进展[J].电镀与精饰,2021,(11):55.[doi:10.3969/j.issn.1001-3849.2021.11.010]
ZHANG Xiaorui,GUO Jia,DING Lianshuai,et al.Progress in Electrochemical Preparation of Carbon Nanotube / Metal Composites[J].Plating & Finishing,2021,(4):55.[doi:10.3969/j.issn.1001-3849.2021.11.010]
[3]史雨菲,李小丽,何天翊,等.石墨烯基材料在3D打印领域的研究进展[J].电镀与精饰,2023,(7):74.[doi:10.3969/j.issn.1001-3849.2023.07.010]
Shi Yufei,Li Xiaoli,He Tianyi,et al.Research progress of graphene-based materials in 3D printing field[J].Plating & Finishing,2023,(4):74.[doi:10.3969/j.issn.1001-3849.2023.07.010]
备注/Memo
收稿日期：2019-06-04；修回日期：2019-08-11
作者简介：邱尚煌，Email：qsh354@qq.com