Zhang Aibin,Chen Sibing.Feasibility study on environment-friendly cadmium plating technology without cyanide Wu Qunying1, Zou Tianjia2, Yan Wei1, Li Feng1, Chen Jing1, Huang Yong1,[J].Plating & Finishing,2024,(10):89-95.
环保无氰镀镉工艺可行性研究
- Title:
- Feasibility study on environment-friendly cadmium plating technology without cyanide Wu Qunying1, Zou Tianjia2, Yan Wei1, Li Feng1, Chen Jing1, Huang Yong1,
- 分类号:
- TQ153.17
- 文献标志码:
- A
- 摘要:
- 无氰镀镉溶液的分散能力和深镀能力优异，当电流密度为1.16～1.37 A/dm2，镀液温度在22～35 ℃时，镉层的沉积速率约为10.00～16.23 μm/h。镉层外观初期为带金属光泽的瓦灰色，当镀液通电量逐渐增加时，镉层外观逐渐变成银灰色、银白色，钝化后为彩虹色。镉层结合力、耐蚀性、氢脆性均符合HB5036—1992的要求。通过霍尔槽试验、经验数据、镉层外观等作为依据补加主盐、导电盐、添加剂，可以保证镉层的外观和沉积速率。在镉层上制备氧化磷化膜，膜层外观和耐蚀性符合工艺要求。小零件的试镀效果良好，满足交付标准。
- Abstract:
- The experiment showed that the dispersing ability and deep plating ability of the cyanide-free cadmium plating solution were excellent. When the current density was 1.16-1.37 A/dm2 and the bath temperature was 22-35 ℃, the deposition rate of cadmium layer was 10.00-16.23 μm/h. The initial appearance of the cadmium layer was tile gray with metallic luster, and when the amount of electricity in the plating solution gradually increased, the appearance of the cadmium layer gradually became silver gray and silver white, and the appearance of the cadmium layer after passivation was rainbow color. The binding force, corrosion resistance and hydrogen brittleness of the cadmium layer met the requirements of HB5036—1992. The appearance and deposition rate of cadmium layer can be guaranteed by adding main salt, conductive salt and additives according to hall chamber test, empirical data and appearance of the cadmium layer. The oxidation phosphating film was prepared on cadmium layer, and the appearance and corrosion resistance of the film met the technological requirements. The test plating effect of small parts was good and met the delivery standard
参考文献/References:
[1].熊俊良, 周玉龙. 电镀镉层斑点故障原因及解决措施[J]. 电镀与精饰, 2020, 42(4): 41-42.
[2].李博. 无氰镀镉替代氰化镀镉工艺研究[J]. 电镀与精饰, 2016, 38(4): 32-35.
[3].毛喆, 胡剑锋, 黄红武, 等. 对镉层防护不当的常见现象及防控措施[J]. 电镀与精饰, 2021, 43(2): 47-50.
[4].代朋民, 唐元. 新型无氰镀镉工艺的研究与应用[J]. 电镀与精饰, 2017, 39(2): 35-38.
[5].万冰华, 杨军, 王福新, 等. 无氰镀镉工艺开发研究与应用[J]. 电镀与精饰, 2014, 36(3): 22-25.
[6].赖奂汶, 郭崇武, 陈媚, 等. 超高耐蚀性氯化钾镀镉防护层的制备[J]. 电镀与涂饰, 2021, 40(23): 1762-1766.
[7].张玉清, 陈同彩, 王春霞, 等. 添加剂对无氰镀镉工艺性能的影响[J]. 电镀与精饰, 2021, 43(8): 16-20.
[8].张允诚, 胡如南, 向荣. 电镀手册[M]. 北京: 国防工业出版社, 1997: 268-280.
[9].郭崇武. 新型碱性无氰镀镉工艺及其镀液与镀层性能[J]. 电镀与涂饰, 2019, 38(3): 97-100.
[10].王大铭, 郭崇武. 氯化钾无氰镀镉工艺的防护[J]. 电镀与涂饰, 2018, 37(23): 1099-1101.
相似文献/References:
[1]张玉清,陈同彩?,王春霞,等.添加剂对无氰镀镉工艺性能的影响[J].电镀与精饰,2021,(8):16.[doi:10.3969/j.issn.1001-3849.2021.08.004]
ZHANG Yuqing,CHEN Tongcai,WANG Chunxia,et al.Effect of Additives on the Performance of Cyanide-Free Cadmium Plating[J].Plating & Finishing,2021,(10):16.[doi:10.3969/j.issn.1001-3849.2021.08.004]
[2]赵健伟*,于晓辉,袁桂云,等.无氰镀银液的浓度对成核机理、镀液和镀层性能的影响[J].电镀与精饰,2022,(12):1.[doi:10.3969/j.issn.1001-3849.2022.12.001]
ZHAO Jianwei*,YU Xiaohui,YUAN Guiyun,et al.Effect of the Concentration of Non-Cyanide Silver Plating Solution on the Electroplating Mechanism Bath and Coating Performance[J].Plating & Finishing,2022,(10):1.[doi:10.3969/j.issn.1001-3849.2022.12.001]
[3]吴群英*,许 磊,夏 媛,等.无氰碱性镀锌工艺性能的研究[J].电镀与精饰,2024,(8):76.[doi:10.3969/j.issn.1001-3849.2024.08.012]
.,009,.,et al.Study on technical properties of cyanide-free alkaline galvanizing?/html>[J].Plating & Finishing,2024,(10):76.[doi:10.3969/j.issn.1001-3849.2024.08.012]
[4]郭崇武*,詹兴刚,王大铭,等.氯化钾无氰镀镉工艺的边界条件[J].电镀与精饰,2024,(12):114.
Guo Chongwu*,Zhan Xinggang,Wang Daming,et al.Boundary conditions for the cyanide-free potassium chloride cadmium plating[J].Plating & Finishing,2024,(10):114.