.,009,.,et al.Study on technical properties of cyanide-free alkaline galvanizing?/html>[J].Plating & Finishing,2024,(8):76-82.[doi:10.3969/j.issn.1001-3849.2024.08.012]
无氰碱性镀锌工艺性能的研究
- Title:
- Study on technical properties of cyanide-free alkaline galvanizing?/html>
- Keywords:
- cyanide-free galvanizing ; bath performance ; coating property ; bath stability
- 分类号:
- TQ153.17
- 文献标志码:
- B
- 摘要:
- 本次使用的无氰碱性镀锌溶液的分散能力和深镀能力良好。电流密度为 1.70 ～ 2.00 A/dm 2 ，镀液温度在 21 ～ 22 ℃ 时，锌层的沉积速率约为 20 μ m/h ，镀液中锌离子的浓度对沉积速率影响较大。锌层外观为均匀细致的银灰色或银白色，钝化后带有绿色、黄色和紫色的彩虹色。锌层结合力、耐蚀性、氢脆性均符合 HB5035 — 1992 的要求。在锌层上制备氧化磷化膜，膜层外观和耐蚀性符合工艺的要求。以霍尔槽试验、锌层外观、沉积速率变化等为依据调整镀液中锌离子的浓度，可通过增大锌板阳极的面积或补加浓缩液来补充镀液中的锌离子。小零件的试镀效果良好，满足交付标准。
- Abstract:
- ： The dispersing ability and deep plating ability of the cyanide-free galvanizing plating solution used in this time were good. When the current density was 1.70 - 2.00 A/dm 2 and the bath temperature is 21 - 22 ℃ ， the deposition rate of zinc layer was about 20 μ m/h ， and the concentration of zinc ions had a great influence on the deposition rate. The zinc layer had a uniform and fine silver-gray or silver-white appearance ， with iridescent colors of green ， yellow and purple after passivation. The binding force ， corrosion resistance and hydrogen brittleness of the zinc layer met the requirements of HB5035 — 1992. The oxidation phosphating film was prepared on zinc layer ， and the appearance and corrosion resistance of the film met the technological requirements. By adjusting the concentration of zinc ions in the plating solution according to the Hall bath test ， the appearance of zinc layer and the change of deposition rate ， the zinc ions in the plating solution could be supplemented by increasing the area of zinc plate anode or adding concentrated liquid. The test plating effect of small parts was good and met the delivery standard.
参考文献/References:
[1] 张允诚 , 胡如南 , 向荣 . 电镀手册 [M]. 北京 : 国防工业出版社 , 1997: 232.
[2] 王宗雄 , 鲍新华 , 周长虹 , 等 . 无氰镀锌工艺的应用及典型配方 [J]. 电镀与涂饰 , 2015, 34(1): 34-39.
[3] 周阳亮 . 高效环保型汽车零配件碱性镀锌的性能对比 [J]. 上海涂料 , 2018, 56(2): 32-35.
[4] 张小勇 . 溶锌技术在无氰碱性镀锌中的应用 [J]. 电镀与涂饰 , 2015, 34(21): 1238-1241.
[5] 廖磊华 , 徐金来 , 刘卫国 , 等 . 节水型无氰碱性镀锌工艺及其维护 [J]. 电镀与涂饰 , 2016, 35(23): 1240-1244.
[6] 吕玲 , 王利强 , 廖广其 , 等 . 不同金属杂质对碱性锌酸盐镀锌层结构及耐蚀性的影响 [J]. 电镀与精饰 , 2021, 43(12): 17-22.
[7] 郭崇武 . 无氰碱性镀锌及镀层性能 [J]. 电镀与精饰 , 2014, 36(1): 9-11.
[8] 梅睿 , 常德华 . 碱性无氰镀锌工艺研究 [J]. 电镀与环保 , 2011, 31(5): 23-25.
[9] 詹益腾 , 胡明 , 熊学舫 , 等 . 高性能碱性无氰光亮镀锌的使用和维护 [J]. 电镀与涂饰 , 2016, 34(3): 141-144.
[10] 徐春红 , 郭群 , 段前坤 . 航空标准件无氰碱洗镀锌的可行性研究 [J]. 电镀与精饰 , 2016, 38(3): 42-46.
[11] 谢无极 . 电镀故障手册 [M]. 北京 : 化学工业出版社 , 2013: 20.
相似文献/References:
[1]赵健伟*,于晓辉,袁桂云,等.无氰镀银液的浓度对成核机理、镀液和镀层性能的影响[J].电镀与精饰,2022,(12):1.[doi:10.3969/j.issn.1001-3849.2022.12.001]
ZHAO Jianwei*,YU Xiaohui,YUAN Guiyun,et al.Effect of the Concentration of Non-Cyanide Silver Plating Solution on the Electroplating Mechanism Bath and Coating Performance[J].Plating & Finishing,2022,(8):1.[doi:10.3969/j.issn.1001-3849.2022.12.001]
[2]吴群英,邹天嘉,严 伟,等.环保无氰镀镉工艺可行性研究[J].电镀与精饰,2024,(10):89.
Zhang Aibin,Chen Sibing.Feasibility study on environment-friendly cadmium plating technology without cyanide Wu Qunying1, Zou Tianjia2, Yan Wei1, Li Feng1, Chen Jing1, Huang Yong1,[J].Plating & Finishing,2024,(8):89.
备注/Memo
收稿日期： 2024-02-05 修回日期： 2024-03-31 * 通信作者： 吴群英（ 1988 ―），女，硕士，高级工程师，研究方向为表面处理， email ： 3091614214@qq.com?/html>