参考文献/References:
[1].Li H X, Rudnev V S, Zheng X H, et al. Characterization of Al2O3 ceramic coatings on 6063 aluminum alloy prepared in borate electrolytes by micro-arc oxidation [J]. Journal of Alloys and Compounds, 2008, 462(1/2): 99-102.
[2].Mo Q, Qin G, Ling K, et al. Layer-by-layer self-assembled polyurea layers onto MAO surface for enhancing corrosion protection to aluminum alloy 6063 [J]. Surface & Coatings Technology, 2021, 405: 126653.
[3].Muhaffel F, Baydogan M, Cimenoglu H. A study to enhance the mechanical durability of the MAO coating fabricated on the 7075 Al alloy for wear-related high temperature applications [J]. Surface & Coatings Technology, 2021, 409: 126843.
[4].Zhang K, Yu S. Preparation of wear and corrosion resistant micro-arc oxidation coating on 7N01 aluminum alloy [J]. Surface & Coatings Technology, 2020, 388: 125453
[5].Quang P T, Sun J K, Kuo Y C, et al. Anomalous layer-thickening during micro-arc oxidation of 6061 Al alloy [J]. Journal of Alloys and Compounds, 2017, 697: 326-332.
[6].Wang J H, Du M H, Han F Z, et al. Effects of the ratio of anodic and cathodic currents on the characteristics of micro-arc oxidation ceramic coatings on Al alloys [J]. Applied Surface Science, 2014, 292: 658-664.
[7].Yang Q, Zhou W, Niu Z, et al. Effect of different surface asperities and surface hardness induced by shot-peening on the fretting wear behavior of Ti-6Al-4V [J]. Surface & Coatings Technology, 2018, 349: 1098-1106.
[8].Sun J, Lu H, Tu N, et al. Friction and corrosion characteristics of microarc oxidation/laser cladding palygorskite coating on 6061 aluminum alloy substrates [J]. Surface & Coatings Technology, 2024, 487: 130992.
[9].Kikuchi T, Yamamoto T, Suzuki R O. Growth behavior of anodic porous alumina formed in malic acid solution [J]. Applied Surface Science, 2013, 284: 907-913.
[10].Lakshmi R V, Sampath S, Aruna S T. Silica-alumina based sol-gel coating containing cerium oxide nanofibers as a potent alternative to conversion coating for AA2024 alloy [J]. Surface & Coatings Technology, 2021, 411: 127007.
[11].Zhang P, Liu J, Xu G, et al. Anticorrosive property of Al coatings on sintered NdFeB substrates via plasma assisted physical vapor deposition method [J]. Surface & Coatings Technology, 2015, 282: 86-93.
[12].Yuan Y, Zheng D, Lu H, et al. A multifunctional gel coating design for simultaneous interface amelioration, polysulfide adsorption and redox regulation in lithium-sulfur batteries [J]. Applied Surface Science, 2020, 533: 147490.
[13].Tang J, Han Z, Zuo Y, et al. A corrosion resistant cerium oxide based coating on aluminum alloy 2024 prepared by brush plating [J]. Applied Surface Science, 2011, 257(7): 2806-2812.
[14].Guido D, Cultrera l, Perrone A. The pulsed laser ablation deposition technique: a new deposition configuration for the synthesis of uniform films [J]. Surface & Coatings Technology, 2004, 180: 603-606.
[15].Chi C, Katsui H, Goto T. Preparation of Na-β-alumina films by laser chemical vapor deposition [J]. Surface & Coatings Technology, 2015, 276: 534-538.
[16].Mwema F M, Oladijo O P, Akinlabi S A, et al. Properties of physically deposited thin aluminium film coatings: A review [J]. Journal of Alloys and Compounds, 2018, 747: 306-323.
[17].Nam T, Lee C W, Kim H J, et al. Growth characteristics and properties of Ga-doped ZnO (GZO) thin films grown by thermal and plasma-enhanced atomic layer deposition [J]. Applied Surface Science, 2014, 295: 260-265.
[18].Liu Y, Chai N, Li Z, et al. Effect of deposition temperature on deposition kinetics and mechanism of silicon boron nitride coating deposited from SiCl4-BCl3-NH3-H2-Ar mixture using low pressure chemical vapor deposition [J]. Surface & Coatings Technology, 2015, 261: 295-303.
[19].Goto T, Banal R, Kimura T. Morphology and preferred orientation of Y2O3 film prepared by high-speed laser CVD [J]. Surface & Coatings Technology, 2007, 201(12): 5776-5781.
[20].Ito A, Joo H S, Kim T S, et al. Synthesis of pseudobrookite titanium oxynitride Ti3-δO4N films by laser chemical vapor deposition [J]. Vacuum, 2015, 116: 121-123.
[21].Jimenez C, De B D, Darraz A, et al. Deposition of TiO2 thin films by atmospheric plasma post-discharge assisted injection MOCVD [J]. Surface & Coatings Technology, 2007, 201 (22/23): 8971-8975.
[22].Kohout J, Bousser E, Schmitt T, et al. Stable reactive deposition of amorphous Al2O3 films with low residual stress and enhanced toughness using pulsed dc magnetron sputtering with very low duty cycle [J]. Vacuum, 2016, 124: 96-100.
[23].Nable J C, Nosheen S, Suib S L, et al. Atmospheric pressure chemical vapor deposition of titanium nitride on metals [J]. Surface & Coatings Technology, 2006, 200(8): 2821-2826.
[24].Wang C, Zhou H, Liang N, et al. Mechanical properties of several laser remelting processed steels with different unit spacings [J]. Applied Surface Science, 2014, 313: 333-340.
[25].Wei K, Lv M, Zeng X, et al. Effect of laser remelting on deposition quality, residual stress, microstructure, and mechanical property of selective laser melting processed Ti-5Al-2.5Sn alloy [J]. Materials Characterization, 2019, 150: 67-77.
[26].Zhang J, Wu Y, Zhang Z, et al. Picosecond laser remelting of electrodeposited Ni-P coating: Parameters optimization and electrochemical corrosion behavior [J]. Surface & Coatings Technology, 2023, 471: 129877.
[27].Yang H, Wu X, Du S, et al. Synergistic effect of "double pores" texture on tribological properties of AZ31 Mg alloy micro-arc oxide ceramic coatings [J]. Surface & Coatings Technology, 2023, 470: 129875.
[28].Praharaj A K, Chaurasia J K, Chandan G R, et al. Enhanced tribological performance of laser directed energy deposited Inconel 625 achieved through laser surface remelting [J]. Surface & Coatings Technology, 2024, 477: 130345.
[29].Song J, Lin J, Zhang Z, et al. Laser remelting of high-velocity arc-sprayed Fe-based amorphous coating for improving corrosion resistance in 3.5% NaCl solution with varying Na2S concentrations [J]. Surface & Coatings Technology, 2024, 485: 130853.
相似文献/References:
[1]王艳伟.填充工序对铝合金壳体零件铬酸阳极化色差的影响[J].电镀与精饰,2019,(7):40.[doi:10.3969/j.issn.1001-3849.2019.07.009]
WANG Yanwei.Influence of Filling Process on Color Difference of Aluminum Alloy Shell after Chromic Acid Anodization[J].Plating & Finishing,2019,(12):40.[doi:10.3969/j.issn.1001-3849.2019.07.009]
[2]黄碧芳*,李远会,王 丽,等.铝合金磷钼酸亚铁转化体系工艺研究[J].电镀与精饰,2019,(9):29.[doi:10.3969/j.issn.1001-3849.2019.09.006]
HUANG Bifang*,LI Yuanhui,WANG Li,et al.Study on the Conversion Process of Ferrous Phosphomolybdate on Aluminum Alloy[J].Plating & Finishing,2019,(12):29.[doi:10.3969/j.issn.1001-3849.2019.09.006]
[3]元 泉,邱 媛*,刘 洋,等.铝合金漆层与氧化层激光清洗应用研究[J].电镀与精饰,2019,(12):25.[doi:10.3969/j.issn.1001-3849.2019.12.006]
YUAN Quan,QIU Yuan#,LIU Yang,et al.Research on Laser Cleaning Application for Coating and Oxide Layer of Aluminum Alloy[J].Plating & Finishing,2019,(12):25.[doi:10.3969/j.issn.1001-3849.2019.12.006]
[4]季 伟,孟繁东,潘科宇,等.铝合金表面油污清洗剂的制备及其腐蚀性研究[J].电镀与精饰,2021,(2):38.[doi:10.3969/j.issn.1001-3849.2021.02.0080]
JI Wei,MENG Fandong,PAN Keyu,et al.季 伟1，孟繁东1，潘科宇1，王文军1，潘明华1，韩怡秋2，邵明亮2，刘 东3，周 勇3*[J].Plating & Finishing,2021,(12):38.[doi:10.3969/j.issn.1001-3849.2021.02.0080]
[5]张子聪,郝建军*,赵荣兴.铝合金复合石墨烯薄膜的制备及腐蚀性能研究[J].电镀与精饰,2021,(7):15.[doi:10.3969/j.issn.1001-3849.2021.07.003]
ZHANG Zicong,HAO Jianjun*,ZHAO Rongxing.Study on Preparation and Corrosion Performance of Aluminum Alloy Composite Graphene Film[J].Plating & Finishing,2021,(12):15.[doi:10.3969/j.issn.1001-3849.2021.07.003]
[6]刘奋照*.几种铝合金材料在汽车防冻液中的腐蚀行为[J].电镀与精饰,2021,(9):59.[doi:10.3969/j.issn.1001-3849.2021.09.010]
LIU Fenzhao*.Corrosion Behavior of Several Aluminum Alloy in Automobile Antifreeze[J].Plating & Finishing,2021,(12):59.[doi:10.3969/j.issn.1001-3849.2021.09.010]
[7]刘巧娣*,邓国军. 硫酸阳极化膜层出现白色粉末问题原因分析 [J].电镀与精饰,2022,(10):88.[doi:10.3969/j.issn.1001-3849.2022.10.015]
LIU Qiaodi*,DENG Guojun.Cause Analysis of White Powder in Sulfuric Acid Anodized Film[J].Plating & Finishing,2022,(12):88.[doi:10.3969/j.issn.1001-3849.2022.10.015]
[8]李志强,魏红阳,陈东初*,等.电源参数对铝合金表面复合氧化膜的多彩电解着色的影响规律研究[J].电镀与精饰,2022,(6):52.[doi:10.3969/j.issn.1001-3849.2022.06.011]
LI Zhiqiang,WEI Hongyang,CHEN Dongchu*,et al.Effects of Power Parameters on Electrolytic Colouring of Colorful Composite Oxide Film on Aluminum Alloy Surface[J].Plating & Finishing,2022,(12):52.[doi:10.3969/j.issn.1001-3849.2022.06.011]
[9]刘 静,马小昭,王帅星.绝缘保护用铬酸阳极氧化工艺研究[J].电镀与精饰,2022,(6):41.[doi:10.3969/j.issn.1001-3849.2022.06.009]
LIU Jing,MA Xiaozhao,WANG Shuaixing.Research on Chromic Acid Anodizing Technique for Insulation Protection[J].Plating & Finishing,2022,(12):41.[doi:10.3969/j.issn.1001-3849.2022.06.009]
[10]李廷取 *,刘祥玲,刘文异. 不同占空比对6061铝合金微弧氧化着色及性能的影响研究 [J].电镀与精饰,2022,(9):20.[doi:10.3969/j.issn.1001-3849.2022.09.004]
LI Tingqu *,LIU Xiangling,LIU Wenyi.Study on Microarc Oxidation Coloring and Properties of 6061 Aluminum Alloy with Different Duty Ratios[J].Plating & Finishing,2022,(12):20.[doi:10.3969/j.issn.1001-3849.2022.09.004]