[1]芦 博.doi: 10.3969/j.issn.1001-3849.2026.05.009退火和固溶温度对钛合金点式锻压激光成形性能影响[J].电镀与精饰,2026,(05):59-64.
　LU Bo.Influence of annealing and solution temperature on performance of titanium alloy by point forging laser forming[J].Plating & Finishing,2026,(05):59-64.
点击复制

doi: 10.3969/j.issn.1001-3849.2026.05.009退火和固溶温度对钛合金点式锻压激光成形性能影响()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2026年05
页码:
59-64
栏目:
出版日期:
2026-05-31

文章信息/Info

Title:
Influence of annealing and solution temperature on performance of titanium alloy by point forging laser forming
作者:
芦 博
(鹤壁能源化工职业学院 机电工程系,河南 鹤壁 458030)
Author(s):
LU Bo
(School of Energy and Chemical Industry, Hebi Vocational College, Hebi 458030, China)
关键词:
钛合金; 固溶温度; 退火温度; 点式锻压; 激光成形
Keywords:
titanium alloy;  solid solution temperature;  annealing temperature;  point forging;  laser forming
分类号:
TQ110；TG15；TP391
文献标志码:
A
摘要:
为明确退火与固溶温度对点式锻压激光成形TC17钛合金力学性能的调控规律，并为工艺参数优化与高性能构件成形提供依据，采用点式锻压激光成形设备对TC17钛合金进行加工，并通过拉伸性能试验和硬度分析评估其力学性能。研究结果表明：点式锻压激光成形能够显著提高TC17钛合金的屈服强度和抗拉强度，但延伸率低于标准；通过调整压下量和退火温度，发现高温退火能提高延伸率但降低强度；硬度随退火温度升高而降低，退火和固溶温度对钛合金点式锻压激光成形性能有明显影响。
Abstract:
To clarify the control law of annealing and solution temperature on the mechanical properties of TC17 titanium alloy formed by point forging laser forming, and to provide a basis for optimizing process parameters and forming high-performance components. TC17 titanium alloy was processed by using point-forging laser forming equipment. The mechanical properties were evaluated through hardness analysis and tensile performance testing. The results show that point forging laser forming greatly increases the yield strength and tensile strength of TC17 titanium alloy, though its elongation falls below the stangdard. High-temperature annealing can increase elongation but reduce strength with varying the pressing force and annealing temperature. Hardness is reduced with the increased annealing temperature, the performance of titanium alloy point forging laser forming is significantly influenced by annealing and solution temperature

参考文献/References:

[1].王占栋, 王世彬, 吴二柯, 等. 水下定向能量沉积修复钛合金电化学腐蚀特性研究[J]. 中国激光, 2022, 49(14): 311-341.
[2].高双胜, 靳文颖, 曹霞, 等. TC4钛合金薄壁件电子束熔丝增材修复熔覆组织及性能研究[J]. 热加工工艺, 2022, 51(12): 71-73.
[3].赵萍, 刘鹏, 王建阳, 等. 热处理对SLM制备钛合金散热结构组织性能的影响[J]. 电焊机, 2023, 53(5): 54-58.
[4].张骞, 张成竹, 林波, 等. 重熔摆动激光焊修复TC4钛合金焊接接头组织和性能[J]. 焊接, 2023, 32(1): 55-59.
[5].张成阳, 何思逸, 杨威, 等. Y2O3弥散强化TC4钛合金粉末及其激光熔覆组织性能研究[J]. 钢铁钒钛, 2023, 44(1): 64-71.
[6].刘军军, 姜昊, 雷振坤, 等. 基于轮廓法测量钛合金激光熔覆中的残余应力[J]. 实验力学, 2023, 38(3): 285-295.
[7].郑超, 胡生双, 张颖, 等. 激光修复TC18钛合金组织及性能特征[J]. 铸造, 2022, 71(1): 44-47.
[8].刘颖鑫. 探究钛金属材料在工艺美术中的应用[J]. 中国锰业, 2017, 35(4): 101-106.
[9].蒋圣威, 周红霞, 李雪婷, 等. 基体表面粗糙度对冷喷涂Ti6Al4?V界面结合的数值模拟[J]. 中国表面工程, 2022, 35(3): 262-272.
[10].孙倩, 孙向阳, 宋燕利, 等. 电磁冲击对TC11钛合金叶片疲劳性能的影响[J]. 中国有色金属学报, 2023, 33(3): 752-766.
[11].WANG L, LUO S, KAINANL, et al. Effect of laser additive repair on high cycle fatigue properties of TC17 titanium alloy. International Journal of Fatigue, 2024, 178(1): 108026.
[12].李明星, 岳彩旭, 刘献礼, 等. 钛合金框架类零件铣削用立铣刀设计与应用研究进展[J]. 机械工程学报, 2023, 59(23): 283-309.
[13].ZHOU S, AN J H, WANG X, et al. Study on fatigue crack propagation behavior of TA15 titanium alloy repaired by laser deposition repair[J]. Fatigue & Fracture of Engineering Materials & Structures, 2022, 45(12): 3692-3700.
[14].肖蒲庐, 陈观华, 陈宇, 等. 飞秒激光织构钛合金表面形貌及润湿性研究[J]. 中国激光, 2023, 50(16): 167-177.
[15].李嘉伟, 渠佳慧, 淡振华, 等. 外加压应力对Ti-35421合金钝化膜损伤修复影响的原位电化学研究[J]. 稀有金属材料与工程, 2023, 52(4): 1419-1425.
[16].周丹, 王鹏程, 张腾飞, 等. ZL101A合金TIG修复色差及组织性能间的相关性研究[J]. 机械工程学报, 2023, 59(7): 398-406.
[17].卢楠楠, 郭以沫, 杨树林, 等. 激光增材修复单晶高温合金的热裂纹形成机制[J]. 金属学报, 2023, 59(9): 1243-1252.
[18].徐荣, 王文军, 祝弘滨, 等. 激光定向能量沉积Al-Mg-Sc-Zr修复5083-H112铝合金的组织和性能[J]. 材料工程, 2024, 52(2): 40-49.
[19].程颖, 洪涛, 易浩, 等. TiB2粒子尺寸分布对Al-5Ti-1B晶粒细化效果的影响[J]. 特种铸造及有色合金, 2024, 44(4): 527-531.
[20].张艳, 黄光杰, 何杰, 等. EA4T钢的高温动态软化模型及晶粒演化研究[J]. 钢铁研究学报, 2024, 36(5): 650-659.

相似文献/References:

[1]孙慧艳*,王兴雅,孙鹏飞.钛合金蓝色腐蚀检查工艺技术研究[J].电镀与精饰,2020,(1):36.[doi:10.3969/j.issn.1001-3849.2020.01.008]
　SUN Huiyan*,WANG Xingya,SUN Pengfei.Research on the Blue Corrosion Inspection Technology of Titanium Alloy[J].Plating & Finishing,2020,(05):36.[doi:10.3969/j.issn.1001-3849.2020.01.008]
[2]李 江,李 博*,刘小强,等.钛合金多孔零件内外表面一次镀铬工艺研究[J].电镀与精饰,2020,(7):38.[doi:10.3969/j.issn.1001-3849.2020.07.0080]
　LI Jiang,LI Bo*,LIU Xiaoqiang,et al.Study on Chromium Plating Process of Porous Parts of Titanium Alloy[J].Plating & Finishing,2020,(05):38.[doi:10.3969/j.issn.1001-3849.2020.07.0080]
[3]杨 堃*,张 明,孙小岚.TC2、TC6表面喷涂WC-17Co与电镀铬耐磨性能对比[J].电镀与精饰,2021,(10):26.[doi:10.3969/j.issn.1001-3849.2021.10.005]
　YANG Kun*,ZHANG Ming,SUN Xiaolan.Wear Resistant Comparison of Spraying WC-17Co Coating and Chromium Plating on the Surface of TC2 and TC6[J].Plating & Finishing,2021,(05):26.[doi:10.3969/j.issn.1001-3849.2021.10.005]
[4]詹中伟,葛玉麟,田礼熙*,等.搅拌速度和颗粒尺寸对复合电沉积Ni-cBN复合量的影响及机理分析[J].电镀与精饰,2022,(1):1.[doi:10.3969/j.issn.1001-3849.2022.01.001]
　ZHAN Zhongwei,GE Yulin TIAN Lixi*,WANG Shuaixing,et al.Effect of Stirring Speed and Particle Size on the Particle Content in the Ni-cBN Composite Plating and Its Mechanism[J].Plating & Finishing,2022,(05):1.[doi:10.3969/j.issn.1001-3849.2022.01.001]
[5]赵明欣,赵 旭*,郎小尘.钛合金表面超疏水膜的制备及其耐蚀性与机械稳定性[J].电镀与精饰,2024,(2):44.[doi:10.3969/j.issn.1001-3849.2024.02.007]
　Zhao Mingxin,Zhao Xu *,Lang Xiaochen.Preparation and corrosion resistance and mechanical stability of superhydrophobic film on titanium alloy[J].Plating & Finishing,2024,(05):44.[doi:10.3969/j.issn.1001-3849.2024.02.007]
[6]李建普,卢旭东*,李冬冬.舰用钛合金及铬涂层抗氧化和腐蚀性能研究[J].电镀与精饰,2024,(5):65.[doi:10.3969/j.issn.1001-3849.2024.05.010]
　Li Jianpu,Lu Xudong*,Li Dongdong.Research on oxidation resistance and corrosion resistance of marine titanium alloy and chromium coating[J].Plating & Finishing,2024,(05):65.[doi:10.3969/j.issn.1001-3849.2024.05.010]
[7]收稿日期： 0-0-8 修回日期： 0-0-.钛合金脉冲电沉积 Cu-WC 复合镀层的硬度与摩擦磨损性能[J].电镀与精饰,2024,(11):58.
　Hardness and friction and wear property of Cu-WC composite coating on titanium alloy prepared by pulse electrodeposition Feng Xujia 1 Sun Hao 1* Gao Chenjing 2 Zhu Qingqin 1[J].Plating & Finishing,2024,(05):58.
[8]陈俊豪,刘 刚,王帅星,等.doi: 10.3969/j.issn.1001-3849.2025.04.016添加剂对TA12钛合金化学铣切性能的影响[J].电镀与精饰,2025,(04):101.
　Chen Junhao,Liu Gang*,Wang Shuaixing,et al.Influence of additive on the chemical milling performance of TA12 titanium alloy[J].Plating & Finishing,2025,(05):101.
[9]李维荣,周宏标,王平右,等.doi: 10.3969/j.issn.1001-3849.2025.05.016钛合金化学铣切加工中酸雾抑雾剂对化铣性能的影响[J].电镀与精饰,2025,(05):107.
　Cheng Fasong,Liu Gang,Wang Shuaixing*,et al.Influence of acid mist suppressants on the chemical milling performance of titanium alloy Li Weirong1, Zhou Hongbiao1, Wang Pingyou1, Yuan Ping1, Wang Tao1,[J].Plating & Finishing,2025,(05):107.
[10]范兴平*,范 维,魏 弦,等.doi: 10.3969/j.issn.1001-3849.2025.10.006电压对Ti15-Mo合金液相等离子体[J].电镀与精饰,2025,(10):39.
　Fan Xingping*,Fan Wei,Wei Xian,et al.Effect of voltage on the carbon nitrogen co-diffusion film layer of Ti15-Mo alloy by liquid phase plasma electrolysis[J].Plating & Finishing,2025,(05):39.

更新日期/Last Update: 2026-05-12