ZHAO Yang,CHEN Yan*,CHENG Miao,et al.Study on the Inner Surface Finishing of Bend Pipe by Electromagnetic Fields Drive Spherical Magnetic Pole[J].Plating & Finishing,2020,(1):22-26.[doi:10.3969/j.issn.1001-3849.2020.01.005]
电磁场作用下球形磁极辅助研磨弯管内表面研究
- Title:
- Study on the Inner Surface Finishing of Bend Pipe by Electromagnetic Fields Drive Spherical Magnetic Pole
- Keywords:
- bend pipe; electromagnetic field; magnetic particle grinding; trajectory rebuild; grinding efficiency; surface morphology
- 文献标志码:
- A
- 摘要:
- 弯管弯曲成形后，在弯折处易产生微裂纹、褶皱等表面质量缺陷问题。本文通过采用六自由度机械手拖动电磁场发生装置沿加工轨迹往复运动，电磁场发生装置驱动球形辅助磁极绕管件内壁转动，实现了对弯管内表面的光整加工。在此基础上，通过对弯管轮廓采集及曲线拟合，重新构建了弯管中心线并转换为新的研磨加工轨迹。采用超景深3D电子显微镜和触针式表面粗糙度测量仪对研磨试验前后弯管内表面的形貌和粗糙度进行了对比分析。结果表明，通过重新构建研磨加工轨迹，试验装置有效解决了研磨弯折处的干涉与研磨不均匀等问题。研磨55 min后，表面粗糙度由原始的0.713 μm降低到0.194 μm，铜合金弯管内表面原始质量缺陷基本去除，表面纹理较为致密均匀。该方法有效避免了未规划研磨轨迹时出现的犁耕等纹理缺陷，提高了弯管的服役可靠性。
- Abstract:
- Surface quality defects such as microcracks and folds are easy to occur at the bending point after bending of bend pipe. In this paper, by using a six-degree-of-freedom manipulator to drive the electromagnetic field generator to move back and forth along the processing path, and the electromagnetic field generator to drive the spherical auxiliary magnetic pole to rotate around the inner wall of the tube, the inner surface finishing of the bend pipe is realized. On this basis, the center line of the bend pipe is reconstructed and transformed into a new grinding path by collecting the outline of the bend pipe and fitting the curve. The morphology and roughness of bend pipe before and after grinding test were compared and analyzed by using super depth-of-field 3D electron microscope and stylus surface roughness measuring instrument. The results show that by reconstructing the grinding trajectory, the experimental device effectively solves the problems of interference and uneven grinding at the grinding bend. After grinding for 55 min, the surface roughness decreased from 0.713 μm to 0.194 μm. The original quality defects on the surface of copper alloy bend pipes were almost removed, and the surface texture was compact and uniform. This finishing method effectively avoids the texture defects such as ploughing when the grinding trajectory is not planned, and improves the service reliability of bend pipe.
参考文献/References:
[1] 苏倩. 全浸海水环境旋转电磁效应对H63黄铜的缓蚀机理研究[D]. 哈尔滨: 哈尔滨工业大学, 2014.
[2] 杨文超, 杜再翔, 张建峰, 等. H63黄铜下水管腐蚀失效分析[J]. 广西大学学报(自然科学版), 2017, 42(5): 1817-1822.
[3] 孙宗琳, 邢振华, 张孟昀, 等. 输油管道90°弯管冲蚀磨损数值模拟研究[J]. 辽宁石油化工大学学报, 2018, 38(2): 47-51.
[4] 闫宏伟, 崔子梓, 焦彪彪, 等. 基于ADAMS螺旋驱动行走机构的弯管通过性能研究[J]. 机械设计, 2017, 34(12): 32-36.
[5] 程康, 李振斌, 李威. L型输流弯管自由模态分析[J]. 舰船科学技术, 2011, 33(4): 30-34+54.
[6] Yamaguchi H, Shinmura T, Sekine M. Uniform internal finishing of sus304 stainless steel bent tube using a magnetic abrasive finishing process[J]. Journal of Manufacturing Science & Engineering, 2005, 127(3): 605-611.
[7] Yamaguchi H, Kang J, Hashimoto F. Metastable austenitic stainless steel tool for magnetic abrasive finishing[J]. CIRP Annals-Manufacturing Technology, 2011, 60(1): 339-342.
[8] 韩冰, 邓超, 陈燕. 球形磁铁在弯管内表面磁力研磨中的应用[J]. 摩擦学学报, 2013, 33(6): 565-570.
[9] 李龙邦, 陈燕, 陈松, 严正伟. 基于旋转进给电磁场的不规则弯管内表面磁研磨研究[J]. 表面技术, 2018, 47(5): 284-289.
[10] 陈燕, 赵杨, 陈松, 等. 基于旋转磁场的6061铝合金弯管内表面光整加工[J]. 中国表面工程, 2018, 31(5): 73-81.
[11] Wang Y, Hu D. Study on the inner surface finishing of tubing by magnetic abrasive finishing[J]. International Journal of Machine Tools & Manufacture, 2005, 45(1): 43-49.
[12] 杨海吉, 韩冰, 陈燕, 等. 自旋转磁极在合金管内表面精密抛光中的应用[J]. 摩擦学学报, 2018, 38(2): 189-195.
[13] Kim J D. Polishing of ultra-clean inner surfaces using magnetic force[J]. The International Journal of Advanced Manufacturing Technology, 2003, 21(2): 91-97.
[14] Yu Z H, Han B, Chen S, et al. Study on the inner surface finishing of irregular spatial elbow pipe by the centerline reconstruction[J]. International Journal of Advanced Manufacturing Technology, 2017(6): 1-9.
[15] 吕美凤, 钱玮. 基于MATLAB的六自由度机械手的运动分析与仿真[J]. 农业装备与车辆工程, 2018, 324(7): 71-73.
[16] 肖振楠, 申燚, 倪辰旖. 六自由度机械手的运动轨迹规划与仿真[J]. 机床与液压, 2018, 465(15): 65-70.
备注/Memo
收稿日期： 2019-06-25；修回日期： 2019-07-22
通信作者： 陈燕， email： laochen412@gmail.com
基金项目： 国家自然科学基金(51775258)；辽宁省自然科学基金重点项目(20170540458)；精密与特种加工教育部重点实验室基金(B201703)；辽宁科技大学研究生教育改革与科技创新项目(LKDYC201806)