SHI Haiming,HUANG Zhangqi,SUO Peng bang,et al.Effect of Anode Current Density on Dissolution Properties of Electroplated Nickel Anode[J].Plating & Finishing,2020,(3):1-5.[doi:10.3969/j.issn.1001-3849.2020.03.001]
阳极电流密度对电镀镍阳极溶解性能的影响
- Title:
- Effect of Anode Current Density on Dissolution Properties of Electroplated Nickel Anode
- Keywords:
- anode current density; current efficiency; solubility; residue rate
- 文献标志码:
- A
- 摘要:
- 为了控制和改善电镀镍阳极的溶解性能,减少工业镍阳极产生的残渣量,提高生产效率,采用电化学工作站和扫描电子显微镜等手段研究了镍阳极在瓦特镍液中的阳极极化曲线、不同阳极电流密度下的电位-时间曲线、阳极电流效率、溶解形貌和残渣率。实验结果表明:阳极电流密度控制在0.75~1.25 A/dm2范围内,槽电压较稳定,电流效率高,镍溶解均匀,残渣率较低。
- Abstract:
- In order to control and improve the solubility of the electroplated nickel anode, reduce the amount of industrial nickel anode residue and increase production efficiency, the anodic polarization curves of nickel anodes in Watt nickel solution, potential-time curve at different anode current densities, current efficiency, dissolution morphology and residue rate of nickel anodes were investigated by means of electrochemical workstations and scanning electron microscopy. The experimental results showed that the anode current density was controlled within the range of 0.75-1.25 A/dm2, the cell voltage was stable, the current efficiency was high, nickel was dissolved uniformly, and the residue rate was low.
参考文献/References:
[1] 刘彦明. 对化学镀镍机理的新看法[J]. 电镀与环保, 1999, (2): 12-14.
[2] 夏天东, 张晓宇, 徐仰涛. 电沉积镍和轧制镍显微组织和力学性能的对比[J]. 中国有色金属学报, 2015, (11): 3133-3140.
[3] 《电镀手册》编写组. 电镀手册上册[M]. 北京:国防工业出版社, 1977.
[4] 陈文亮. 含硫活性镍的阳极行为及特性[J]. 电镀与精饰, 1986, (6): 23-27.
[5] 刘道新. 材料的腐蚀与防护[M]. 西安:西北工业大学出版社, 2006, 99-101.
[6] Moula M G, Szymanski G, Shobeir B. Electrochemical dissolution behavior and the residue formation mechanism of laboratory made carbonyl nickel[J]. Electrochimica Acta, 2015, 162: 108-118.
[7] 朱艳芳, 闫康平, 王伟. 电镀中镍阳极残渣形成机理研究[J]. 广州化工, 2010, 38(1): 139-140.
相似文献/References:
[1]张 帅,邵刚勤,程旭东,等.Ga对Al-Zn-In-Mg-Ga-Sn合金阳极
电化学性能的影响[J].电镀与精饰,2018,(12):1.[doi:10.3969/j.issn.1001?3849.2018.12.001]
ZHANG Shuai,SHAO Gangqin,CHENG Xudong,et al.Effects of Ga on Electrochemical behavior of Al-Zn-In-Mg-Ga-Sn alloy anode[J].Plating & Finishing,2018,(3):1.[doi:10.3969/j.issn.1001?3849.2018.12.001]
[2]吴双成*,储荣邦.六价铬镀铬添加剂作用原理[J].电镀与精饰,2020,(2):26.[doi:10.3969/j.issn.1001-3849.2020.02.006]
WU Shuangcheng*,CHU Rongbang.Mechanism of Additives for Hexavalent Chromium Plating[J].Plating & Finishing,2020,(3):26.[doi:10.3969/j.issn.1001-3849.2020.02.006]
[3]刘建祥*,浦建堂,周 磊,等.有机磺酸盐添加剂对电镀硬铬性能的影响[J].电镀与精饰,2021,(6):6.[doi:10.3969/j.issn.1001-3849.2021.06.002]
LIU Jianxiang*,PU Jiantang,ZHOU Lei,et al.Effect of Organic Sulfonate Additives on Properties of Hard Chromium Electroplating[J].Plating & Finishing,2021,(3):6.[doi:10.3969/j.issn.1001-3849.2021.06.002]
[4]刘颖*,邢希瑞,田栋,等.酸性一价铜电镀铜的工艺及能效分析[J].电镀与精饰,2024,(4):99.[doi:10.3969/j.issn.1001-3849.2024.04.014]
Liu Ying*,Xing Xirui,Tian Dong,et al.Energy efficiency analysis of copper electroplating employing acidic cuprous solution[J].Plating & Finishing,2024,(3):99.[doi:10.3969/j.issn.1001-3849.2024.04.014]
备注/Memo
收稿日期: 2019-05-29;修回日期: 2019-07-31
通信作者: 王春霞, wcx95@163.com
基金项目: 校企合作项目,提高金川电镀专用镍应用效果的研究