PDF下载分享

[1]王香玉*,雪金海,谢美芳,等.四种银镀层的制备与抗变色性能对比[J].电镀与精饰,2020,(7):12-16.[doi:10.3969/j.issn.1001-3849.2020.07.0030]
　WANG Xiangyu*,XUE Jinhai,XIE Meifang,et al.Electrodeposition Preparation and Comparison of Anti-tarnish Properties of Four Kinds of Coatings[J].Plating & Finishing,2020,(7):12-16.[doi:10.3969/j.issn.1001-3849.2020.07.0030]

点击复制

四种银镀层的制备与抗变色性能对比

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG] 卷: 期数: 2020年7 页码: 12-16 栏目: 出版日期: 2020-07-10

Title:: Electrodeposition Preparation and Comparison of Anti-tarnish Properties of Four Kinds of Coatings

作者:: 王香玉^1*; 雪金海¹; 谢美芳²; 王战辉²; 乔宣谕²; 1.平高集团表面处理及金属防腐实验室，河南平顶山 467001； 2.河南平高电气股份有限公司，河南平顶山 467001

Author(s):: WANG Xiangyu^1*; XUE Jinhai¹; XIE Meifang²; WANG Zhanhui²; QIAO Xuanyu²; 1.Lab of Surface Treatment and Metal Anti-corrosion of Ping Gao Group, Pingdingshan 467001, China　2.Henan Ping Gao Electric Co. Ltd., Pingdingshan 467001, China

关键词:: 高压开关; 抗变色; 银-锡合金镀层

Keywords:: high-voltage switch anti-tarnish silver-tin alloy coating

DOI:: 10.3969/j.issn.1001-3849.2020.07.0030

文献标志码:: A

摘要:: 针对高压开关行业用镀银层易变色问题，分别制备了纯银层、银-石墨镀层、银-石墨烯镀层和银-锡合金镀层，并主要对比分析了其抗变色性能等性能。研究结果表明，银-锡合金镀层的抗变色性能明显优于其他三种镀层，故银-锡合金镀层可替代银层，应用于户外高压开关零部件。

Abstract:: In view of the problem that silver coating is easy to change color in high-voltage switch industry, pure silver coating, silver graphite coating, silver graphene coating and silver tin alloy coating were prepared respectively, and their anti-tarnish properties were compared and analyzed. The results show that the anti-tarnishing property of the silver-tin alloy coating is the best. Therefore, silver tin alloy coating can replace silver coating and be used in outdoor high-voltage switch parts.

参考文献/References:

[1] 李宝增, 张柳丽. 巯基苯基四氮唑镀银层抗变色工艺研究[J]. 电镀与精饰, 2015, 37(1): 35-38.
Li B Z, Zhang L L. Study on anti-tarnishing technology of PMTA for silver coating [J]. Plating and Finishing, 2015, 37(1): 35-38 (in Chinese).
[2] 唐致远, 郭鹤桐, 于英浩. 防银变色及其机理的研究[J]. 电镀与精饰, 1999, 21(3): 9-12.
Tang Z Y, Guo H T, Yu yinghao. Study on the mechanism of preventing silver discoloration [J]. Plating and Finishing, 1999, 21(3): 9-12 (in Chinese).
[3] 王立维, 于锦, 刘帅. 分散剂对电沉积Ag/C复合层腐蚀性能的影响[J]. 材料保护, 2015,48(5): 17-19.
Wang L W, Yu J, Liu S. Effect of dispersant on corrosion performance of electrodeposited Ag/C composite coating [J]. Materials Protection, 2015, 48(5): 17-19 (in Chinese).
[4] Davitz D. Silver Palladium allog: United States, 5037708[P]. 1991-08-06.
[5] Leidheiser H, Ghuman A R P. Pulse electroplating of silver-tin alloys and the formation of Ag₃Sn[J]. Journal of the Electrochemical Society, 1973, 120(4): 484-487.
[6] 田健. 镀银层变色机理及防变色工艺研究[J]. 五金科技, 1996, 4: 29-30.
Tian J. Study on discoloration mechanism and anti-discoloration process of silver plating layer[J]. Hardware Science and Technology, 1996, 4: 29-30 (in Chinese).

相似文献/References:

[1]路亚娟 *,李晓征,马迎春,等.一例放电事故造成硬氧膜脱落的原因分析[J].电镀与精饰,2023,(1):92.[doi:10.3969/j.issn.1001-3849.2023.01.014]
　Lu Yajuan *,Li Xiaozheng,Ma Yingchun,et al.Reason analysis of hard anodic oxide film falling off caused by a discharge accident[J].Plating & Finishing,2023,(7):92.[doi:10.3969/j.issn.1001-3849.2023.01.014]

备注/Memo

收稿日期： 2019-12-13；修回日期： 2020-02-27
通信作者：王香玉，wangxiangyuyantao@163.com

更新日期/Last Update: 2020-07-10