ZHANG Tiaolan*,YANG Weijie,WANG Huali.Study on the Treatment of Electroplating Wastewater by Activated Carbon Fibers with Different Fabric Structures[J].Plating & Finishing,2021,(10):59-62.[doi:10.3969/j.issn.1001-3849.2021.10.012]
不同织物结构的活性碳纤维对电镀废水处理的研究
- Title:
- Study on the Treatment of Electroplating Wastewater by Activated Carbon Fibers with Different Fabric Structures
- 文献标志码:
- A
- 摘要:
- 采用不同织物的活性碳纤维吸附法处理含铬、镍、铜电镀废水。本文研究了单轴向、双轴向、多轴向活性碳纤维对电镀废水的渗透率及对金属离子的去除率。结果表明:当电解时间为30 min时,不同织物结构的活性碳纤维对铬离子、铜离子、镍离子去除率效果最好。双轴向活性碳纤维对电镀废水中的金属离子去除率最高,去除率达到95.92 %。
- Abstract:
- The electroplating wastewater containing chromium, nickel and copper was treated by adsorption of activated carbon fiber (ACF) with different fabrics. The permeability of uniaxial, biaxial and multi-axial activated carbon fibers to electroplating wastewater and the removal rate of metal ions were studied in this paper. The results showed that when the electrolysis time was 30 min, the ACF with different fabric structures had the best removal efficiency of chromium ions, copper ions and nickel ions. The removal rate of metal ions in electroplating wastewater by biaxial ACF was the highest, and the removal rate could reach 95.92 %.
参考文献/References:
[1] 张乾, 迟占秋, 段丽丽, 等. 活性炭吸附处理电镀废水的研究[J]. 电镀与环保, 2018, 38(2): 55-58.
Zhang Q, Chi Z Q, Duan L L, et al. Activated carbon adsorption treatment of electroplating wastewater [J]. Electroplating and Environmental Protection, 2018, 38(2): 55-58 (in Chinese).
[2] 邱敬贤, 刘君, 黄献. 电化学法处理电镀废水的研究进展[J]. 电镀与精饰, 2019, 41(10): 17-21.
Qiu J X, Liu J, Huang X. Research progress of electrochemical treatment of electroplating wastewater[J]. Plating and Finishing, 2019, 41(10): 17-21 (in Chinese).
[3] Chen F Y. Enhanced destruction of Cu(CN)32- by H2O2 under alkaline conditions in the presence of EDTA/pyrophosphate[J]. Chemical Engineering, 2014, (253): 478-485.
[4] Nidá M S, Akl M A. Biosorption of Ni(II) from electroplating wastewater by modi?ed (Eriobotrya japonica) loquat bark[J]. Journal of Saudi Chemical Society, 2014, 18: 379-386.
[5] 于志达.电镀废水零排放技术的应用 [J]. 生态与环境工程, 2019, 7: 106-107.
Yu Z D. Application of zero discharge technology of electroplating wastewater [J]. Ecological and Environmental Engineering, 2019, 7: 106-107 (in Chinese).
[6] 丁建东, 王云丽, 沈洋, 等.电絮凝处理含铬废水的研究[J]. 电镀与环保, 2018, 38(6): 73-75.
Ding J D, Wang Y L, Shen Y, et al. Study on the treatment of chromium-containing wastewater by electrocoagulation [J]. Electroplating and Environmental Protection, 2018, 38(6): 73-75 (in Chinese).
[7] 李景杰. 电镀废水化学法综合处理及回用工程[J]. 水处理技术, 2013, 39(12): 132-135.
Li J J. Comprehensive chemical treatment and reuse engineering of electroplating wastewater[J]. Water Treatment Technology, 2013, 39(12): 132-135 (in Chinese).
[8] 王天行, 刘晓东, 学敏, 等. 电镀废水处理技术研究现状及评述[J]. 电镀与涂饰, 2017, 36(9):493-500.
Wang T X, Liu X D, Xue M, et al . Research status and review of electroplating wastewater treatment technology[J]. Electroplating and Finishing, 2017, 36(9): 493-500 (in Chinese).
相似文献/References:
[1]邱敬贤,刘君,黄献.电化学法处理电镀废水的研究进展[J].电镀与精饰,2019,(10):17.[doi:10.3969/j.issn.1001-3849.2019.10.005]
QIU Jingxian,LIU Jun,HUANG Xian.Development on Electrochemical Treatment of Electroplating Wastewater[J].Plating & Finishing,2019,(10):17.[doi:10.3969/j.issn.1001-3849.2019.10.005]
[2]彭丽花,董 佳.电镀废水处理工艺改造的探索与实践[J].电镀与精饰,2020,(4):43.[doi:10.3969/j.issn.1001-3849.2020.04.0100]
PENG Lihua,DONG Jia.Exploration of the Transformation of Electroplating Wastewater Treatment Process[J].Plating & Finishing,2020,(10):43.[doi:10.3969/j.issn.1001-3849.2020.04.0100]
[3]岑雨秋,高文皓*,周建人.电镀废水特征污染物的危害及处理方法研究进展[J].电镀与精饰,2020,(9):31.
CEN Yuqiu,GAO Wenhao*,ZHOU Jianren.Hazards of Characteristic Pollutants in Electroplating Wastewater and Researching Progress on Method of Disposal[J].Plating & Finishing,2020,(10):31.
[4]郭崇武,陈 康.三价铬镀铬废水的处理方法[J].电镀与精饰,2020,(12):43.[doi:10.3969/j.issn.1001-3849.2020.12.0090]
GUO Chongwu,CHEN Kang.Method for Treatment of Trivalent Chromium Cr-Plating Wastewater[J].Plating & Finishing,2020,(10):43.[doi:10.3969/j.issn.1001-3849.2020.12.0090]
[5]计建洪*,庄惠生.多种物化生化组合工艺处理印染电镀混合废水[J].电镀与精饰,2021,(10):51.[doi:10.3969/j.issn.1001-3849.2021.10.010]
JI Jianhong*,ZHUANG Huisheng.Treatment for Printing and Dyeing-Electroplating Mixed Wastewater by a Variety of Physicochemical and Biochemical Combined Processes[J].Plating & Finishing,2021,(10):51.[doi:10.3969/j.issn.1001-3849.2021.10.010]
[6]王瑞丽,张 曦,淡明霞,等.分子印迹技术在电镀废水处理中的应用[J].电镀与精饰,2022,(10):80.[doi:10.3969/j.issn.1001-3849.2022.10.014]
WANG Ruili,ZHANG Xi,DAN Mingxia,et al.Application of Molecular Imprinting Technology in Electroplating Wastewater Treatment[J].Plating & Finishing,2022,(10):80.[doi:10.3969/j.issn.1001-3849.2022.10.014]
[7]季宏飞*,李志猛,陈金明,等. 电渗析技术在电镀废水零排放方面的应用研究 [J].电镀与精饰,2023,(9):64.[doi:10.3969/j.issn.1001-3849.2023.09.010]
Ji Hongfei*,Li Zhimeng,Chen Jinming,et al.Application of electrodialysis technology in zero discharge of electroplating wastewater[J].Plating & Finishing,2023,(10):64.[doi:10.3969/j.issn.1001-3849.2023.09.010]
[8]焦贵生*,杜庆新,李小翻,等. 提高电镀硬铬镀层与基体金属结合力的方法 [J].电镀与精饰,2023,(9):69.[doi:10.3969/j.issn.1001-3849.2023.09.010]
Jiao Guisheng*,Du Qingxin,Li Xiaofan,et al.Application of electrodialysis technology in zero discharge of electroplating wastewater[J].Plating & Finishing,2023,(10):69.[doi:10.3969/j.issn.1001-3849.2023.09.010]
备注/Memo
收稿日期: 2020-06-06;修回日期: 2020-09-11
通信作者: 张条兰(1978-),女,硕士研究生,讲师,主要从事电镀废水的研究。email: 764136228@qq.com