[1]沈岳军*,罗华江,王少营,等.温度对Ni-P/PTFE复合镀层性能的影响[J].电镀与精饰,2019,(8):1-4.[doi:10.3969/j.issn.1001-3849.2019.08.001]
　SHEN Yuejun*,LUO Huajiang,WANG Shaoying,et al.Effect of Temperature on the Properties of Ni-P/PTFE Composite Coating[J].Plating & Finishing,2019,(8):1-4.[doi:10.3969/j.issn.1001-3849.2019.08.001]
点击复制

温度对Ni-P/PTFE复合镀层性能的影响()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2019年8
页码:
1-4
栏目:
出版日期:
2019-08-15

文章信息/Info

Title:
Effect of Temperature on the Properties of Ni-P/PTFE Composite Coating
作者:
沈岳军*; 罗华江; 王少营; 刘京飞
贵州航天电器股份有限公司，贵州 贵阳 550009
Author(s):
SHEN Yuejun*;  LUO Huajiang;  WANG Shaoying;  LIU Jingfei
Guizhou Space Appliance Stock Co Ltd, Guiyang 550009, China
关键词:
温度; Ni-P/PTFE; 复合镀层; 性能
Keywords:
temperature;  Ni-P/PTFE;  composite coating;  performance
DOI:
10.3969/j.issn.1001-3849.2019.08.001
文献标志码:
A
摘要:
在不锈钢基体上采用化学沉积法制备了Ni-P/PTFE复合镀层，以孔隙率、磷含量、沉积速率、硬度以及耐蚀性等为评价指标，研究了温度对Ni-P/PTFE复合镀层性能的影响。结果表明，温度为85 ℃时，复合镀层综合性能达到最佳。
Abstract:
Ni-P/PTFE composite coating was prepared by chemical deposition method on the substrate of stainless steel. The effects of temperature on the properties of Ni-P/PTFE composite coating were studied by the evaluation indexes of poriness, phosphorus content, deposition rate, hardness and corrosion resistance. The results showed that the comprehensive performance of the coating achieved to be the best when the temperature was 85 ℃.

参考文献/References:

[1] 张贤. Ni-P-WC化学复合镀层的制备及性能研究[D]. 河北科技大学, 2015.
[2] 张放, 戴建东. 化学镀的应用及修复[C]. 黑龙江省机械工程学会年会论文集. 黑龙江, 2002:185-187.
[3] 王玲. 化学镀镍液中次磷酸钠含量的电位滴定法测定-现场快速分析[J]. 广东化工, 2003, 5:38-39+47.
[4] 赵善芬, 张振邦. 低温化学镀镍中络合剂作用研究[J]. 表面技术, 1996, 25(5):24-25,28.
[5] Kalantary M R, Holbrook K A, Wells P B. Optimization of a bath for electroless plating and its use for the production of nickel-phosphorus-silicon carbide coating[J]. Transactions of Institute of Metal Finishing, 1993, 71(2):55-61.
[6] Nishira M, Takano O. Friction and wear characteristics of electroless Ni-P-PTFE composite coating[J]. Plating and Surface finishing, 1994, 81(1):48-50.
[7] 王勇. 中温高磷化学镀镍工艺的研究[D]. 华南理工大学, 2011.
[8] 刘定富, 崔东, 魏世洋. 化学镀镍-磷合金镀层中磷的测定[J]. 电镀与精饰, 2012, 34(1):39-41.
[9] 余祖孝, 颜杰, 金永中, 等. 化学镀Ni-Co-P合金工艺对其镀层性能的影响[J]. 腐蚀与防护, 2007, 2:73-76.
[10] 夏承钰. 酸性化学镀镍沉积速度的研究[J]. 材料保护, 1996, 1:4-7.

相似文献/References:

[1]文明立,赵 超,杨义华,等.工艺条件对线路板化学镀钯的影响[J].电镀与精饰,2020,(12):20.[doi:10.3969/j.issn.1001-3849.2020.12.0050]
　WEN Mingli,ZHAO Chao,YANG Yihua,et al.Effect of Process Conditions on Electroless Palladium Plating on Circuit Boards[J].Plating & Finishing,2020,(8):20.[doi:10.3969/j.issn.1001-3849.2020.12.0050]
[2]金永清*,尹红国,寸海红,等.热镀锌镀层白条缺陷研究及控制[J].电镀与精饰,2024,(4):106.[doi:10.3969/j.issn.1001-3849.2024.04.015]
　Jin Yongqing*,Yin Hongguo,Cun Haihong,et al.Study and control of white bar defects in hot-dip galvanized coating[J].Plating & Finishing,2024,(8):106.[doi:10.3969/j.issn.1001-3849.2024.04.015]
[3]阮 英,赵 昭*,包能远,等.doi: 10.3969/j.issn.1001-3849.2025.08.009锂电铜箔制备技术与力学性能研究[J].电镀与精饰,2025,(08):56.
　Ruan Ying,Zhao Zhao*,Bao Nengyuan,et al.Research on preparation technology and mechanical properties of the copper foil for lithium battery[J].Plating & Finishing,2025,(8):56.

备注/Memo

备注/Memo:
收稿日期： 2019-01-09；修回日期： 2019-03-22
通信作者： 沈岳军，email：18798054839@163.com
更新日期/Last Update: 2019-08-10