WANG Chaolin*,SONG Bin,LIU Juan,et al.The Effectiveness of Laser Texturing Technology in Surface Treatment of the Bonding Quality of Helicopter Slurry Pack[J].Plating & Finishing,2021,(12):29-33.[doi:10.3969/j.issn.1001-3849.2021.12.006]
直升机桨叶包片胶接前激光毛化处理的有效性研究
- Title:
- The Effectiveness of Laser Texturing Technology in Surface Treatment of the Bonding Quality of Helicopter Slurry Pack
- 文献标志码:
- A
- 摘要:
- 为提升直升机桨叶包片胶接质量，开展激光毛化技术在不同材料包片胶接前表面处理工艺中的有效性研究。分别对经酸洗、喷砂、激光毛化工艺处理后的钛合金、不锈钢、纯镍金属材料试件，进行外观、粗糙度、微观形貌检测，并在胶接后进行浮辊剥离试验、剪切强度试验，结果表明：激光毛化处理可在金属表面获得规则的微观形貌，且试件无变形现象，与喷砂表面同等级粗糙度下，浮辊剥离值及剪切强度明显高于喷砂或酸洗处理的表面，可有效提升胶接结合强度。
- Abstract:
- In order to improve the bonding quality of helicopter slurry pack, the effectiveness of laser texturing technology in surface treatment before bonding was studied. The test panels of titanium alloy, stainless steel and pure nickel treated by acid pickling, sand blasting and laser texturing were tested and verified by appearance, roughness, micro-morphology and dry floating peeling test. The results indicated that the regular micro-morphology can be obtained by laser texturing on the surface of metal, and no deformation in the test panels. Under the same roughness, the value of floating roller peel and shear strength resistance of the test panels treated by laser texturing is higher than that of test panels treated by acid pickling and sand blasting, which shows that the bonding strength can be improved effectively by laser texturing.
参考文献/References:
[1] 张瑞华,梁海娇,李宝磊,等.光纤激光轧辊毛化工艺参数研究[J]. 应用激光, 2012(4): 104-107.
Zhang R H, Liang H J, Li B L, et al. Experimental parameters study on roll texturing with fiber laser[J]. Applied Laser, 2012(4): 104-107 (in Chinese).
[2] 符永宏,高兴东,华希俊,等.圆锥轧辊激光毛化加工研究[J]. 激光技术,2012(3): 361-363.
Fu Y H, Gao X D, Hua X J, et al. Study on laser texturing on come rller surface[J]. Applied Laser, 2012(3): 361-363 (in Chinese).
[3] 全国胶粘剂标准化技术委员会. GB/T 7122—1996 高强度胶黏剂剥离强度的测定浮辊法[S]. 北京:中国标准出版社,1996.
National Technical Committee for Standardization of Adhesives. GB/T 7122—1996 Determination of Peel Resistance of High-Strength Adhesive Bonds - Floating-Roller Method[S]. Beijing: China Standard Publishing House(in Chinese).
[4] 全国胶粘剂标准化技术委员会.GB/T 7124—2008 胶黏剂拉伸剪切强度的测定(刚性材料对刚性材料)[S]. 北京:中国标准出版社, 2008.
National Technical Committee for Standardization of Adhesives. GB/T 7124—2008 Adhesives-Determination of Tensile Lap-Shear Strength of Rigid-to-Rigid Bonded Assemblies[S]. Beijing: China Standard Publishing House, 2008 (in Chinese).
[5] 符永宏,刘新金,符昊,等.不同激光参量及辅助工艺对毛化形貌的影响[J]. 工具技术, 2018, 52(1):48-51.
Fu Y H, Liu X J, Fu H, et al. Influence of different laser parameters add auxiliary process on roughen morphology[J]. Tool Engineering, 2018, 52(1): 48-51 (in Chinese).
[6] 彭亚南,莫凡,毛才文.不同金属表面处理对高分子材料与金属连接强度影响[J]. 工程塑料应用,2018,46(1):45-48.
Peng Y N, Mo F, Mao C W. Effect of metal surface treatment on the bonding strength between metal and polymer material [J]. Engineering Plastics Application, 2018, 46(1): 45-48 (in Chinese).
[7] 凌步军,刘新金,倪振兴,等.激光毛化表面微形貌成形工艺实验研究[J]. 现代制造技术与装备,2017(11): 30-33.
Ling B J, Liu X J, Ni Z X, et al. Experimental research of laser texturing of the surface mmicrotopography forming process[J]. Modern Manufacturing Technology And Equipment, 2017(11): 30-33 (in Chinese).
相似文献/References:
[1]李 涛*.一种TC18钛合金酸洗工艺的应用研究[J].电镀与精饰,2024,(8):65.[doi:10.3969/j.issn.1001-3849.2024.08.010]
Li Tao *.Application study of a pickling process for TC18 titanium alloy[J].Plating & Finishing,2024,(12):65.[doi:10.3969/j.issn.1001-3849.2024.08.010]
[2]收稿日期： 0-0- 修回日期： 0-0-.一种铝及铝合金氰化镀银前处理酸洗工艺研究[J].电镀与精饰,2024,(11):30.
Study on pickling process for pre-treatment of cyanide silver plating of aluminum and aluminum alloys Li Xiaozheng 1 2 3 Wu Rumeng 1 2 3* Zhang Hongjun 1 2 3 Ma Yingchun 1 2 3 Wang Ting 1 2 3[J].Plating & Finishing,2024,(12):30.
备注/Memo
收稿日期： 2021-10-06；修回日期： 2021-10-17
作者简介：王朝琳，女，E-mail：alincyb@163.com