Zhang Bangyan*,Dong Jiajian,Zheng Shijie,et al.Research progress on the ceramic particle reinforced metal matrix composite coatings prepared by composite electrodeposition[J].Plating & Finishing,2023,(1):46-55.[doi:10.3969/j.issn.1001-3849.2023.01.008]
复合电沉积陶瓷颗粒增强金属基复合涂层研究进展
- Title:
- Research progress on the ceramic particle reinforced metal matrix composite coatings prepared by composite electrodeposition
- Keywords:
- composite electrodeposition ; composite coating ; wear-resistance ; corrosion-resistance ; high temperature oxidation
- 分类号:
- TG174
- 文献标志码:
- A
- 摘要:
- 根据国内外对复合电沉积制备陶瓷颗粒增强金属基复合涂层研究结果，对复合电沉积的基本概念、机理以及复合电沉积方法主要分类进行了归纳和概述，对耐磨、耐蚀和抗高温氧化陶瓷颗粒增强金属基复合涂层进行了分类讨论，重点综述了其组织结构和性能特点及其影响规律等。在此基础上，对复合电沉积陶瓷颗粒增强金属基复合涂层发展前景进行了展望。
- Abstract:
- ： Based on the research results of ceramic particle reinforced metal matrix composite coatings prepared by composite electrodeposition at home and abroad ， the basic concepts and mechanisms of composite electrodeposition ， and the main categories of composite electrodeposition methods were summarized. The wear-resistant ， corrosion-resistant ， and high temperature oxidation resistant composite coatings are classified and discussed. The microstructure and properties of these three kinds of composite coatings and their influence laws were emphatically summarized. On this basis ， the development prospect of ceramic particle reinforced metal matrix composite coatings prepared by composite electrodeposition was prospected.
参考文献/References:
[1] Mortensen A, Llorca J. Metal matrix composites[J]. Annual Review of Materials Research, 2010, 40(1): 243-270.
[2] 刘琳 , 康敏 , 杨寅初 , 等 . 喷射参数对 Ni-P-BN(h)-Al 2 O 3 纳米复合镀层显微硬度及耐磨性的影响 [J]. 材料保护 , 2020, 53(2): 93-98, 111.
[3] 王闯 , 张快 , 严红燕 , 等 . 金属基及陶瓷基金属陶瓷的强化机理 [J]. 中国陶瓷 , 2020, 56(1): 1-4.
[4] 张洋 , 朱浩 , 曹雅彬 . 纳米陶瓷颗粒增强金属基复合材料的制备技术 [J]. 微纳电子技术 , 2014, 51(2): 126-30, 35.
[5] 王晓丽 , 顾海 , 赵紫怡 , 等 . 电沉积金属基复合镀层制备研究进展 [J]. 电镀与精饰 , 2021, 43(8): 44-47.
[6] 李长春 , 姜新华 , 肖祥定 , 等 . Ni-P-WC 和 Ni-P-SiC 复合镀层的耐磨和耐蚀性能比较 [J]. 材料保护 , 2021, 54(9): 59-62.
[7] Torkamani D A, Velashjerdi M, Abbas A, et al. Electrodeposition of nickel matrix composite coatings via various boride particles: A review[J]. Journal of Composites and Compounds, 2021, 3(7): 91-98.
[8] 刘光明 . 表面处理技术概论第 2 版 [M]. 北京 : 化学工业出版社 , 2018.
[9] 王晓丽 , 周昭昌 , 黄大志 . 复合电沉积技术制备金属基—微粒薄膜的研究进展 [J]. 热加工工艺 , 2018, 47(22): 16-20, 6.
[10] 郭鹤桐 , 张三元 . 复合电镀技术 [M]. 北京 : 化学工业出版社 , 2007.
[11] 安娜 , 花珂 , 史洪源 , 等 . TC4 钛合金表面电沉积 Co-W/MoS 2 复合镀层及摩擦磨损性能研究 [J]. 电镀与精饰 , 2022, 44(9): 63-70.
[12] 范云鹰 , 张英杰 , 董鹏 , 等 . 复合电沉积的影响因素 [J]. 电镀与涂饰 , 2007(10): 4-7.
[13] Walsh F C, Ponce D L C. A review of the electrodeposition of metal matrix composite coatings by inclusion of particles in a metal layer: an established and diversifying technology[J]. Transactions of the IMF, 2014, 92(2): 83-98.
[14] Rasooli A, Safavi M S, Kasbkar H M. Cr 2 O 3 nanoparticles: A promising candidate to improve the mechanical properties and corrosion resistance of Ni-Co alloy coatings[J]. Ceramics International, 2018, 44(6): 6466-6473.
[15] Raghavendra C, Basavarajappa S, Sogalad I. Electrodeposition of Ni-Al 2 O 3 nano composite coating and evaluation of wear characteristics[C] // Proceedings of the IOP conference series: materials science and engineering, IOP Publishing, 2016: 976-982.
[16] Wu G, Li N, Zhou D, et al. Electrodeposited Co-Ni-Al 2 O 3 composite coatings[J]. Surface and Coatings Technology, 2004, 176(2): 157-164.
[17] Mohajeri S, Dolati A, Rezagholibeiki S. Electrodeposition of Ni/WC nano composite in sulfate solution[J]. Materials Chemistry and Physics, 2011, 129(3): 746-750.
[18] Kumar C M P, Lakshmiakshmikanthan A, Chandrashekarappa M P G, et al. Electrodeposition based preparation of Zn-Ni alloy and Zn-Ni-WC nano-composite coatings for corrosion-resistant applications[J]. Coatings, 2021, 11(6): 712.
[19] Wang C, Wang D, Chen W, et al. Tribological properties of nanostructured WC/CoNi and WC/CoNiP coatings produced by electro-deposition[J]. Wear, 2002, 253(5-6): 563-571.
[20] Laszczyńska A, Winiarski J, Szczygie? B, et al. Electrodeposition and characterization of Ni-Mo-ZrO 2 composite coatings[J]. Applied Surface Science, 2016, 369: 224-231.
[21] Li B, Zhang W, Li D. Synthesis and properties of a novel Ni-Co and Ni-Co/ZrO 2 composite coating by DC electrodeposition[J]. Journal of Alloys and Compounds, 2020, 821: 153258.
[22] Arghavanian R, Parvini-Ahmadi N. The effect of co-electrodeposited ZrO 2 particles on the microstructure and corrosion resistance of Ni coatings[J]. Journal of Solid State Electrochemistry, 2010, 15(10): 2199-2204.
[23] Qu N, Zhu D, Chan K. Fabrication of Ni-CeO 2 nanocomposite by electrodeposition[J]. Scripta Materialia, 2006, 54(7): 1421-1425.
[24] Xue Y J, Liu H B, Lan M M, et al. Effect of different electrodeposition methods on oxidation resistance of Ni-CeO 2 nanocomposite coating[J]. Surface and Coatings Technology, 2010, 204(21-22): 3539-3545.
[25] Pompei E, Magagnin l, Lecis N, et al. Electrodeposition of nickel-BN composite coatings[J]. Electrochimica Acta, 2009, 54(9): 2571-2574.
[26] Shahri Z, Allahkaram S R, Zarebidaki A. Electrodeposition and characterization of Co-BN (h) nanocomposite coatings[J]. Applied Surface Science, 2013, 276: 174-181.
[27] Shrestha N K, Sakurada K, Masuko M, et al. Composite coatings of nickel and ceramic particles prepared in two steps[J]. Surface and Coatings Technology, 2001, 140(2): 175-181.
[28] 王渊 . 电泳 - 脉冲电沉积 Ni- 石墨烯纳米复合镀层及其性能研究 [D]. 西安 : 西安科技大学 , 2018.
[29] 田海燕 . 电泳—电沉积镍基纳米复合镀层及其性能的基础研究 [D]. 南京 : 南京航空航天大学 , 2008.
[30] 赵运伟 , 黄巍 , 田海燕 , 等 . 电泳—电沉积 Ni- 金刚石复合镀层及其耐磨性能研究 [J]. 表面技术 , 2013, 42(2): 77-79, 125.
[31] 马瑜曼 . 电泳—电镀沉积 Cu-Mn 3 O 4 复合涂层的制备及性能研究 [D]. 沈阳 : 东北大学冶金学院 , 2020.
[32] 殷凯华 . 电泳—电沉积 Cr/Si 3 N 4 复合镀层的制备及其摩擦磨损性能研究 [D]. 重庆 : 重庆理工大学 , 2022.
[33] 郭忠诚 , 杨显万 . 电沉积多功能复合材料的理论与实践 [M]. 北京 : 冶金工业出版社 , 2002.
[34] Rudnik E, Burzyńska L, Dolasiński?, et al. Electrodeposition of nickel/SiC composites in the presence of cetyltrimethylammonium bromide[J]. Applied Surface Science, 2010, 256(24): 7414-7420.
[35] Orlovskaja L, Periene N, Kurtinaitiene M, et al. Ni-SiC composite plated under a modulated current[J]. Surface and Coatings Technology, 1999, 111(2-3): 234-239.
[36] Hou K, Ger M, Wang L, et al. The wear behaviour of electro-codeposited Ni-SiC composites[J]. Wear, 2002, 253(9-10): 994-1003.
[37] Dehgahi S, Amini R, Alizadeh M. Corrosion, passivation and wear behaviors of electrodeposited Ni-Al2O 3 -SiC nano-composite coatings[J]. Surface and Coatings Technology, 2016, 304: 502-511.
[38] Juneghani M A, Farzam M, Zohdirad H. Wear and corrosion resistance and electroplating characteristics of electrodeposited Cr-SiC nano-composite coatings[J]. Transactions of Nonferrous Metals Society of China, 2013, 23(7): 1993-2001.
[39] Tey E, Zainal Z, Pah L K, et al. Effect of mechanical agitation on Cr-Al 2 O 3 nanocomposite coatings fabricated from trivalent chromium electrodeposition[J]. Solid State Phenomena, 2021, 317: 506-514.
[40] Demir M, Kanca E, Karahan ? H. Characterization of electrodeposited Ni-Cr/hBN composite coatings[J]. Journal of Alloys and Compounds, 2020, 844: 155511.
[41] 孙垂康 , 贾卫平 , 周绍安 , 等 . 超声辅助脉冲电沉积 Ni-TiN 复合镀层的结合力和耐蚀 [J]. 材料保护 , 2021, 54(4): 80-85.
[42] Arghavanian R, Parvini Ahmadi N. Electrodeposition of Ni-ZrO 2 composite coatings and evaluation of particle distribution and corrosion resistance[J]. Surface Engineering, 2013, 27(9): 649-654.
[43] Szczygie? B, Ko?odziej M. Composite Ni/Al 2 O 3 coatings and their corrosion resistance[J]. Electrochimica Acta, 2005, 50(20): 4188-4195.
[44] Dehgahi S, Amini r, Alizadeh M. Microstructure and corrosion resistance of Ni-Al 2 O 3 -SiC nanocomposite coatings produced by electrodeposition technique[J]. Journal of Alloys and Compounds, 2017, 692: 622-628.
[45] Zhang B, Zhang Q, Zhang Z, et al. Incorporation of nano/micron-SiC particles in Ni-based composite coatings towards enhanced mechanical and anti-corrosion properties[J]. International Journal of Minerals, Metallurgy and Materials, 2022, 29(1): 153-160.
[46] Jin P, Sun C, Zhou C, et al. Effect of SiC particle size on structures and properties of Ni-SiC nanocomposites deposited by magnetic pulse electrodeposition technology[J]. Ceramics International, 2019, 45(16): 20155-20164.
[47] Nazir M H, Khan Z A, Saeed A, et al. Analyzing and modelling the corrosion behavior of Ni/Al 2 O 3 , Ni/SiC, Ni/ZrO 2 and Ni/graphene nanocomposite coatings[J]. Materials (Basel), 2017, 10(11): 1225.
[48] Budi E, Tandri C, Darsono N, et al. Preliminary study on high-temperature oxidation of Ni-AlN-TiN/Si 3 N 4 electrodeposition composite coatings[C] // Proceedings of the Journal of Physics: Conference Series, IOP Publishing, 2021: 012067.
[49] Ebrahimifar H. Oxidation and electrical behavior of AISI 430 steel coated with Ni-P-TiO 2 -ZrO 2 composite for SOFC interconnect application[J]. Journal of Materials Science: Materials in Electronics, 2020, 31(20): 17183-17201.
[50] Meng J S, Ji Z S. Effect of La 2 O 3 /CeO 2 particle size on high-temperature oxidation resistance of electrodeposited Ni-La 2 O 3 /CeO 2 composites[J]. Transactions of Nonferrous Metals Society of China, 2014, 24(11): 3571-3577.
[51] Zhang H J, Zhou Y B, Sun J F. Preparation and oxidation behavior of electrodeposited Ni-CeO 2 nanocomposite coatings[J]. Transactions of Nonferrous Metals Society of China, 2013, 23(7): 2011-2020.
[52] Farrokhzad M A, Khan T I. High temperature oxidation of nickel-based cermet coatings composed of Al 2 O 3 and TiO 2 nanosized particles[J]. Oxidation of Metals, 2013, 81(1-2): 267-285.
[53] Khoran E, Zandrahimi M, Ebrahimifar H. Microstructure and oxidation behavior of Ni-TiO 2 composite coating at high temperature[J]. Oxidation of Metals, 2018, 91(1-2): 177-189.
[54] Mosavi A, Ebrahimifar H. Investigation of oxidation and electrical behavior of AISI 430 steel coated with Mn-Co-CeO 2 composite[J]. International Journal of Hydrogen Energy, 2020, 45(4): 3145-3162.
[55] Gorouh A A, Zandrahimi M, Ebrahimifar H. Investigation of oxidation behaviour of AISI-430 steel interconnects in the presence of Ni-Co-CeO 2 composite coating for application of solid oxide fuel cells[J]. Bulletin of Materials Science, 2020, 43(1): 221.
相似文献/References:
[1]田佩佩,牛宗伟*,刘可峰,等.电流密度对超疏水Ni-MoS2-Al2O3复合镀层润湿性的影响[J].电镀与精饰,2021,(10):14.[doi:10.3969/j.issn.1001-3849.2021.10.003]
TIAN Peipei,NIU Zongwei*,LIU Kefeng,et al.Effect of Current Density on Wettability of Superhydrophobic Ni-MoS2-Al2O3 Composite Coating[J].Plating & Finishing,2021,(1):14.[doi:10.3969/j.issn.1001-3849.2021.10.003]
[2]詹中伟,葛玉麟,田礼熙*,等.搅拌速度和颗粒尺寸对复合电沉积Ni-cBN复合量的影响及机理分析[J].电镀与精饰,2022,(1):1.[doi:10.3969/j.issn.1001-3849.2022.01.001]
ZHAN Zhongwei,GE Yulin TIAN Lixi*,WANG Shuaixing,et al.Effect of Stirring Speed and Particle Size on the Particle Content in the Ni-cBN Composite Plating and Its Mechanism[J].Plating & Finishing,2022,(1):1.[doi:10.3969/j.issn.1001-3849.2022.01.001]
[3]杨林*,李文兵,赵雪飞.反应气体流量对机械传动轴表面涂层与性能的影响[J].电镀与精饰,2022,(12):32.[doi:10.3969/j.issn.1001-3849.2022.12.005]
YANG Lin*,LI Wenbing,ZHAO Xuefei.Effect of Reaction Gas Flow on Surface Coating and Properties of Mechanical Transmission Shaft[J].Plating & Finishing,2022,(1):32.[doi:10.3969/j.issn.1001-3849.2022.12.005]
[4]李 敏,张胜健*,曹秋菊.桐油覆膜Ni-Co-SiO2纳米复合涂层的制备及防腐性能研究[J].电镀与精饰,2023,(1):8.[doi:10.3969/j.issn.1001-3849.2023.01.002]
Li Min,Zhang Shengjian*,Cao Qiuju.Preparation and corrosion resistance of tung oil coated Ni-Co-SiO 2 nanocomposite coatings[J].Plating & Finishing,2023,(1):8.[doi:10.3969/j.issn.1001-3849.2023.01.002]
[5]陈 可,张 琦,王凯凤,等. 聚酰亚胺复合薄膜性能研究 [J].电镀与精饰,2024,(2):96.[doi:10.3969/j.issn.1001-3849.2024.02.014]
Chen Ke,Zhang Qi,Wang Kaifeng,et al.Study on the properties of polyimide composite film[J].Plating & Finishing,2024,(1):96.[doi:10.3969/j.issn.1001-3849.2024.02.014]
[6]牟 杨*,田北平,赵学磊.建筑铝合金模板的表面改性与耐蚀耐磨性能研究[J].电镀与精饰,2024,(10):21.
Mou Yang *,Tian Beiping,Zhao Xuelei.Research on surface modification and corrosion and wear resistance of architectural aluminum alloy template[J].Plating & Finishing,2024,(1):21.
[7]刘建国,金 宁,王 淼,等.碳钢表面电镀锌镍/有机富铝复合涂层的制备与性能[J].电镀与精饰,2024,(10):56.
Wang Jiwen,Li Qingpeng.Preparation and properties of electroplating zinc-nickel alloy/organic aluminum-rich composite coatings on carbon steel surface Liu Jianguo1*, Jin Ning 2, Wang Miao2, Zhang Bolun2, Han Li2, Han Changzhi3,[J].Plating & Finishing,2024,(1):56.
[8]收稿日期： 0-0- 修回日期： 0-0-8.Ni-Sn / MoO2 复合电极的制备及析氢性能研究[J].电镀与精饰,2024,(11):36.
Preparation and hydrogen evolution performance of Ni-Sn/MoO 2 composite electrodes Zhu Zirui Xing Lehong * Zhao Yutong Zuo Yue Sun Chenyang Hao Yungui Fu Xiaotong[J].Plating & Finishing,2024,(1):36.
[9]所彭帮*,龙 金,胡林荣,等.Ni5Al/85Ni-15C复合涂层的性能及应用[J].电镀与精饰,2024,(12):61.
Suo Pengbang *,Long Jin,Hu Linrong,et al.Performance and application of Ni5Al/85Ni-15C composite coating[J].Plating & Finishing,2024,(1):61.
备注/Memo
收稿日期： 2022-10-16 修回日期： 2022-11-07 * 通信作者： 张帮彦（ 1986 ―），男，博士，讲师，研究方向为腐蚀 / 耐磨防护涂层及其优化技术， email ： zby@nchu.edu.cn 基金项目： 国家自然科学基金（青年）项目（ 51901097 ）；江西省自然科学基金（青年）项目（ 20212BAB214036 ）；江西省金属材料微结构调控重点实验室（南昌航空大学）开放基金?/html>