[1]李维荣,周宏标,王平右,等.doi: 10.3969/j.issn.1001-3849.2025.05.016钛合金化学铣切加工中酸雾抑雾剂对化铣性能的影响[J].电镀与精饰,2025,(05):107-114.
　Cheng Fasong,Liu Gang,Wang Shuaixing*,et al.Influence of acid mist suppressants on the chemical milling performance of titanium alloy Li Weirong1, Zhou Hongbiao1, Wang Pingyou1, Yuan Ping1, Wang Tao1,[J].Plating & Finishing,2025,(05):107-114.
点击复制

doi: 10.3969/j.issn.1001-3849.2025.05.016钛合金化学铣切加工中酸雾抑雾剂对化铣性能的影响()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2025年05
页码:
107-114
栏目:
出版日期:
2025-05-31

文章信息/Info

Title:
Influence of acid mist suppressants on the chemical milling performance of titanium alloy Li Weirong1, Zhou Hongbiao1, Wang Pingyou1, Yuan Ping1, Wang Tao1,
作者:
李维荣1;  周宏标1;  王平右1;  袁 萍1;  王 涛1;  程法嵩1;  刘 刚2;  王帅星2*;  杜 楠2
(1. 中国航发贵州黎阳航空动力有限公司,贵州 贵阳 550014 ;2. 南昌航空大学 材料科学与工程学院,江西 南昌 330063)
Author(s):
Cheng Fasong1;  Liu Gang2;  Wang Shuaixing2*;  Du Nan2
(1. AECC Guizhou Liyang Aviation Power Co., Ltd., Guiyang 550014, China 2. School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063, China)
关键词:
钛合金; 化学铣切; 抑雾剂; 浸蚀比; 渗氢量
Keywords:
titanium alloy;  chemical milling;  mist suppressants;  etching ratio;  hydrogen permeation rate
分类号:
TQ153.2
文献标志码:
A
摘要:
为了有效抑制钛合金化铣过程中酸雾的逸出，在化铣液中添加了不同种类的酸雾抑雾剂。研究了抑雾效果，并分析了抑雾剂对化铣工件的表面粗糙度、浸蚀比及渗氢量的影响。结果表明，单一的酸雾抑雾剂对钛合金化铣的抑雾率均低于80%，而复配型酸雾抑雾剂的抑雾率可达95%以上，抑雾效果更加显著。复配型酸雾抑雾剂不仅能有效抑制酸雾的逸出，还可显著改善化铣质量。在化铣液中添加复配型酸雾抑雾剂后，钛合金化铣的表面粗糙度、浸蚀比及其波动幅度明显降低，且复配型酸雾抑雾剂不会引起钛合金的氢脆。
Abstract:
In order to effectively suppress the escape of acid mist during the chemical milling of titanium alloy, different types of acid mist suppressants were added to the milling solution, and their inhibitory effects on acid mist were studied. Meanwhile, the influence of acid mist suppressants on the surface roughness, etching ratio and hydrogen permeation rate of chemical milling for titanium alloy samples were also analyzed. The results showed that the inhibitory rate of a single suppressant on acid mist during chemical milling of titanium alloy is less than 80%, but the combination of multiple suppressant has a significant inhibitory effect on acid mist and the inhibitory rate is above 95%. The complex acid mist suppressants can not only effectively suppress the escape of acid mist, but also significantly improve the quality of chemical milling. When the complex acid mist suppressants is added to the milling solution, the surface roughness, etching ratio and its fluctuation amplitude for chemical milling of titanium alloy are significantly reduced. Besides, the complex acid mist suppressant will not cause the hydrogen embrittlement of titanium alloy

参考文献/References:

[1].张秋平. 钛合金结构件加工新工艺[J]. 飞航导弹, 2010(1):86-90.
[2].赵永岗, 张春刚, 王辉, 等. 化学铣切在钛合金加工中的研究及应用[J]. 表面技术, 2009, 38(6):83-86.
[3].林翠, 刘枫, 赵晴, 等. TC4钛合金腐蚀加工速度和表面质量影响因素研究[J]. 航空材料学报, 2008(5):50-54.
[4].薛露平, 叶晖, 许维超. 基于均匀设计的钛合金化铣工艺研究与应用[J]. 火箭推进, 2016, 42(4):97-102.
[5].李庆春. TA12钛合金深度化铣工艺及铣后性能研究[D]. 哈尔滨: 哈尔滨工业大学, 2015.
[6].李荻, 金蕾. 钛合金化学铣切液的研究[J]. 稀有金属, 1991(1):22-25.
[7].林翠, 杜楠, 胡舸, 等. 氢氟酸-硝酸体系中Ti-6Al-4V的腐蚀加工溶解特征[J]. 稀有金属材料与工程, 2016, 45(10):2628-2634.
[8].万斌, 赵远涛, 李文戈. 化学铣切参数对TA15钛合金XRD的影响[J]. 腐蚀与防护, 2023, 44(10):37-41.
[9].周礼君, 赵晴, 杜楠, 等. TC4钛合金化学铣切槽液调整与再生[J]. 表面技术, 2018, 47(4):190-195.
[10].林翠, 赵晴, 文庆杰. TC1钛合金的腐蚀加工及其对基体性能影响[J]. 材料工程, 2015, 43(7):48-55.
[11].戚运莲, 邓炬, 洪权, 等. 钛薄壁球体的化学铣加工[J]. 中国有色金属学报, 1998(2):259-262.
[12].张红, 朱彦海. 钛合金化学铣切工艺研究[J]. 航空工艺技术, 1996(6):29-30.
[13].李荻, 金蕾. 工艺因素对钛合金化铣的影响[J]. 稀有金属, 1991(2):120-123.
[14].林翠, 胡舸, 梁静, 等. TC1和TC4钛合金腐蚀加工溶解行为研究[J]. 航空材料学报, 2010, 30(6):43-50.
[15].王帅东, 张昕宇, 赵武军, 等. 2195铝锂合金碱性化学铣切工艺探究[J]. 电镀与精饰, 2020, 42(1):33-35.
[16].戚运莲, 邓炬, 洪权, 等. 钛和钛合金化学铣切中的吸氢及其影响[J]. 航空制造技术, 2000(2):30-32.

相似文献/References:

[1]孙慧艳*,王兴雅,孙鹏飞.钛合金蓝色腐蚀检查工艺技术研究[J].电镀与精饰,2020,(1):36.[doi:10.3969/j.issn.1001-3849.2020.01.008]
　SUN Huiyan*,WANG Xingya,SUN Pengfei.Research on the Blue Corrosion Inspection Technology of Titanium Alloy[J].Plating & Finishing,2020,(05):36.[doi:10.3969/j.issn.1001-3849.2020.01.008]
[2]李 江,李 博*,刘小强,等.钛合金多孔零件内外表面一次镀铬工艺研究[J].电镀与精饰,2020,(7):38.[doi:10.3969/j.issn.1001-3849.2020.07.0080]
　LI Jiang,LI Bo*,LIU Xiaoqiang,et al.Study on Chromium Plating Process of Porous Parts of Titanium Alloy[J].Plating & Finishing,2020,(05):38.[doi:10.3969/j.issn.1001-3849.2020.07.0080]
[3]杨 堃*,张 明,孙小岚.TC2、TC6表面喷涂WC-17Co与电镀铬耐磨性能对比[J].电镀与精饰,2021,(10):26.[doi:10.3969/j.issn.1001-3849.2021.10.005]
　YANG Kun*,ZHANG Ming,SUN Xiaolan.Wear Resistant Comparison of Spraying WC-17Co Coating and Chromium Plating on the Surface of TC2 and TC6[J].Plating & Finishing,2021,(05):26.[doi:10.3969/j.issn.1001-3849.2021.10.005]
[4]詹中伟,葛玉麟,田礼熙*,等.搅拌速度和颗粒尺寸对复合电沉积Ni-cBN复合量的影响及机理分析[J].电镀与精饰,2022,(1):1.[doi:10.3969/j.issn.1001-3849.2022.01.001]
　ZHAN Zhongwei,GE Yulin TIAN Lixi*,WANG Shuaixing,et al.Effect of Stirring Speed and Particle Size on the Particle Content in the Ni-cBN Composite Plating and Its Mechanism[J].Plating & Finishing,2022,(05):1.[doi:10.3969/j.issn.1001-3849.2022.01.001]
[5]赵明欣,赵 旭*,郎小尘.钛合金表面超疏水膜的制备及其耐蚀性与机械稳定性[J].电镀与精饰,2024,(2):44.[doi:10.3969/j.issn.1001-3849.2024.02.007]
　Zhao Mingxin,Zhao Xu *,Lang Xiaochen.Preparation and corrosion resistance and mechanical stability of superhydrophobic film on titanium alloy[J].Plating & Finishing,2024,(05):44.[doi:10.3969/j.issn.1001-3849.2024.02.007]
[6]李建普,卢旭东*,李冬冬.舰用钛合金及铬涂层抗氧化和腐蚀性能研究[J].电镀与精饰,2024,(5):65.[doi:10.3969/j.issn.1001-3849.2024.05.010]
　Li Jianpu,Lu Xudong*,Li Dongdong.Research on oxidation resistance and corrosion resistance of marine titanium alloy and chromium coating[J].Plating & Finishing,2024,(05):65.[doi:10.3969/j.issn.1001-3849.2024.05.010]
[7]收稿日期： 0-0-8 修回日期： 0-0-.钛合金脉冲电沉积 Cu-WC 复合镀层的硬度与摩擦磨损性能[J].电镀与精饰,2024,(11):58.
　Hardness and friction and wear property of Cu-WC composite coating on titanium alloy prepared by pulse electrodeposition Feng Xujia 1 Sun Hao 1* Gao Chenjing 2 Zhu Qingqin 1[J].Plating & Finishing,2024,(05):58.
[8]范兴平*,范 维,魏 弦,等.doi: 10.3969/j.issn.1001-3849.2025.10.006电压对Ti15-Mo合金液相等离子体[J].电镀与精饰,2025,(10):39.
　Fan Xingping*,Fan Wei,Wei Xian,et al.Effect of voltage on the carbon nitrogen co-diffusion film layer of Ti15-Mo alloy by liquid phase plasma electrolysis[J].Plating & Finishing,2025,(05):39.
[9]芦 博.doi: 10.3969/j.issn.1001-3849.2026.05.009退火和固溶温度对钛合金点式锻压激光成形性能影响[J].电镀与精饰,2026,(05):59.
　LU Bo.Influence of annealing and solution temperature on performance of titanium alloy by point forging laser forming[J].Plating & Finishing,2026,(05):59.
[10]王建邦.doi: 10.3969/j.issn.1001-3849.2026.06.010钛合金表面减摩耐磨复合膜层构筑及其结合强度增强机制[J].电镀与精饰,2026,(06):79.
　WANG Jianbang.Construction of anti-friction and wear-resistant composite film layers on titanium alloy surfaces and its mechanism for enhancing bonding strength[J].Plating & Finishing,2026,(05):79.
[11]陈俊豪,刘 刚,王帅星,等.doi: 10.3969/j.issn.1001-3849.2025.04.016添加剂对TA12钛合金化学铣切性能的影响[J].电镀与精饰,2025,(04):101.
　Chen Junhao,Liu Gang*,Wang Shuaixing,et al.Influence of additive on the chemical milling performance of TA12 titanium alloy[J].Plating & Finishing,2025,(05):101.

更新日期/Last Update: 2025-05-19