HE Rui,XU Yanling*,ZENG Xiye,et al.Study on Adsorption Behavior of Cr(VI) by Graphene Oxide/Ferrous Oxide Magnetic Composites[J].Plating & Finishing,2019,(9):1-6.[doi:10.3969/j.issn.1001-3849.2019.09.001]
氧化石墨烯/四氧化三铁磁性复合材料对Cr(VI)的吸附研究
- Title:
- Study on Adsorption Behavior of Cr(VI) by Graphene Oxide/Ferrous Oxide Magnetic Composites
- 关键词:
- 氧化石墨烯; 四氧化三铁; Cr(VI); 准二级动力学方程; Langmuir吸附
- Keywords:
- graphene oxide; ferrous oxide; Cr(VI); quasi-second-order kinetic equation; Langmuir adsorption
- 文献标志码:
- A
- 摘要:
- Cr(VI)是电镀工业中经常使用的一种重金属，也是电镀废液中难以处理的主要污染源之一。氧化石墨烯作为一种新型的单层二维材料，是一种优良的重金属离子吸附材料。本文成功制备了氧化石墨烯/四氧化三铁磁性复合材料，并以Cr(VI)为目标离子，对其吸附分离性能进行了研究。结果表明，Cr(VI)的初始浓度和溶液pH对吸附量和去除率均有一定影响。pH为2时，吸附效果最好。动力学过程模拟和等温吸附模型模拟结果表明，该吸附材料与铬离子的吸附数据更符合准二级动力学方程和Langmuir吸附模型。
- Abstract:
- Cr(VI) is a kind of heavy metal which is often used in electroplating industry, and it’s also one of the main pollution sources which is difficult to remove in electroplating wastewater. Graphene oxide, as a new type of two-dimensional single layer material, is an excellent material for heavy metal ion adsorption. In this paper, graphene oxide and ferric oxide magnetic composites were successfully prepared and the adsorption and separation properties of magnetic composites were studied with Cr(VI) as the target ion. The results showed that the initial concentration of Cr(VI) and pH had certain effects on adsorption capacity and removal efficiency. When the pH was 2, the adsorption effect was the best. The results of kinetic process simulation and isothermal adsorption model simulation showed that the adsorption data of chromium ion on the adsorbent were more in line with quasi-second-order kinetic equation and Langmuir adsorption model.
参考文献/References:
[1] 王迪. 石墨烯负载钯纳米催化剂的制备及其对铬污染物催化处理性能研究[D]. 北京: 北京化工大学, 2012.
[2] 楚广, 高腾飞, 苏莎, 等. 离子交换法处理废水中的铬（Ⅵ）[J]. 湖南有色金属, 2016, 32(04): 57-61.
[3] Li Q P, Xu B, Zhuang L H, et al. Preparation, characterization, adsorption kineticsand thermodynamics of chitosan adsorbent grafted with a hyperbranched polymer designed for Cr(VI) removal[J]. Cellulos, 2018, 25: 3471-3486.
[4] Hu J, Chen C L, Zhu X X, et al. Removal of chromium from aqueous solution by using oxidized multiwalled carbon nanotubes[J]. Journal of Hazardous Materials, 2009, 162(2-3): 1542-1550.
[5] Shen Y S, Wang S L, Tzou Y M, et al. Removal of hexavalent Cr by coconut coir and derived chars-the effect of surface functionality[J]. Bioresource Technology, 2011, 104(1):165-172.
[6] 赵云, 马江权, 张传栋, 等. 磁性氧化石墨烯的制备及其对Cu2+的吸附性能[J]. 化工新型材料, 2018, 46(02): 99-102.
[7] 王乐乐. 磁性氧化石墨烯及其复合纳米材料对铀（Ⅵ）的吸附性能研究[D]. 南昌: 东华理工大学, 2017.
[8] 吴庭芳, 李宇英, 石善滕, 等. 磁性氧化石墨烯的制备及其对Pb2+的吸附研究[J]. 电镀与精饰, 2018, 40(2): 1-4.
相似文献/References:
[1]李丽君,卜路霞*,刘树彬,等.不同表面活性剂对氧化石墨烯分散性的影响[J].电镀与精饰,2020,(6):23.[doi:10.3969/j.issn.1001-3849.2020.06.0050]
LI Lijun,BU Luxia*,LIU Shubin,et al.Effects of Different Surfactants on Dispersibility of Graphene Oxide[J].Plating & Finishing,2020,(9):23.[doi:10.3969/j.issn.1001-3849.2020.06.0050]
[2]张雪娜,冯贝贝,索文华,等.电沉积法制备Ni-GO复合镀层的工艺及力学性能研究[J].电镀与精饰,2020,(8):1.[doi:10.3969/j.issn.1001-3849.2020.08.0010]
ZHANG Xuena,FENG Beibei,SUO Wenhua,et al.Study on the Process and Mechanical Properties of Ni-GO Composite Coating Prepared by Electrodeposition[J].Plating & Finishing,2020,(9):1.[doi:10.3969/j.issn.1001-3849.2020.08.0010]
[3]杨 明,陈国美,倪自丰*,等.40Cr基体表面GO/BTESPT硅烷复合膜的制备和性能表征[J].电镀与精饰,2020,(9):16.
YANG Ming,CHEN Guomei,NI Zifeng*,et al.Preparation and Characterization of GO/BTESPT Silane Composite Film on 40Cr Substrate[J].Plating & Finishing,2020,(9):16.
备注/Memo
收稿日期： 2019-05-21；修回日期： 2019-06-25
通信作者： 许艳玲，email：369280818@qq.com
基金项目： 国家自然科学基金项目（21404082）；2017年天津农学院大学生创新创业训练计划项目（201710061209）