PDF下载 分享
[1]张 策,张德忠*,郭俊灏,等. 铝合金阳极氧化膜低温无镍封孔工艺及其封孔性能 [J].电镀与精饰,2024,(1):20-27.[doi:10.3969/j.issn.1001-3849.2024.01.004]
　Zhang Ce,Zhang Dezhong*,Guo Junhao,et al.A low-temperature nickel-free sealing process for anodic oxide film on aluminum alloys and its sealing performance?/html>[J].Plating & Finishing,2024,(1):20-27.[doi:10.3969/j.issn.1001-3849.2024.01.004]
点击复制

铝合金阳极氧化膜低温无镍封孔工艺及其封孔性能

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG] 卷: 期数: 2024年1 页码: 20-27 栏目: 出版日期: 2024-01-15
Title:
A low-temperature nickel-free sealing process for anodic oxide film on aluminum alloys and its sealing performance?/html>
作者:
（1.武汉材料保护研究所有限公司，湖北 武汉 430030； 2.上海英汇科技发展有限公司，上海 201814； 3.深圳市原诚精细化工开发有限公司，广东 深圳 518100）
Author(s):
（1.Wuhan Material Protection Research Institute Co.， Ltd.， Wuhan 430030， China；
2.Shanghai Yinghui Technology Development Co.， Ltd.， Shanghai 201814， China；
3.Yuancheng Fine Chemical Development Co.， Ltd.， Shenzhen 518100， China）
关键词:
铝合金; 阳极氧化; 无镍封孔; 低温
Keywords:
aluminum alloy ;  anodizing ;  nickel free sealing ;  low-temperature
分类号:
TQ153.6
DOI:
10.3969/j.issn.1001-3849.2024.01.004
文献标志码:
A
摘要:
为克服传统沸水封孔高能耗和镍盐封孔污染环境的不足，研制了一种无镍低温封孔工艺，其工艺为：锂盐 20~30 g/L ，氟锆酸盐 3.0~5.0 g/L ，表面活性剂 1.0~2.0 g/L ，有机添加剂 N 2.0~4.0 mL/L ，温度 35~55 ℃ ， pH 5.0~5.4 ，封闭时间宜控制在 2~3 min/ μ m 。通过酸浸蚀失重试验和电化学试验法对封孔质量和封孔膜的耐蚀性进行评价。结果表明：采用配制的低温无镍封孔剂进行封闭，膜层酸浸蚀失重＜ 30 mg·dm -2 ，电化学性能明显改善，其封孔效果优于沸水封孔，略差于常温镍盐封孔。
Abstract:
： In order to overcome the shortcomings of traditional boiling water sealing with high energy consumption and nickel salt sealing environment pollution ， a nickel-free low-temperature sealing process was developed ， which includes lithium salt 20 - 30 g/L ， fluorozirconate 3.0 - 5.0 g/L ， surfactant 1.0 - 2.0 g/L and organic additive N 2.0 - 4.0 mL/L. The temperature is 35 - 55 ℃ ， pH value is 5.0 - 5.4 ， and the sealing time should be controlled at 2 - 3 min/ μ m. The sealing quality was evaluated by acid etching test ， and the corrosion resistance of the sealing film was evaluated by electrochemical test. The results show that when the low-temperature nickel-free sealing process is used for sealing ， the weight loss of the anodic oxide film is less than 30 mg·dm -2 after acid etching ， and the electrochemical performance is obviously improved. The sealing quality is better than that of boiling water sealing process and slightly worse than that of normal temperature nickel salt sealing process.

参考文献/References:



[1] 敖炳秋 . 轻量化汽车材料技术的最新动态 [J]. 汽车工艺与材料 , 2002(8): 1-21, 105.

[2] 王国军 , 王祝堂 . 铝合金在中国民用航空器上的应用 [J]. 轻合金加工技术 , 2017, 45(11): 1-11.

[3] 王慧婷 , 史娜 , 刘章 , 等 . 6xxx 系铝合金表面腐蚀及其防腐的研究现状 [J]. 表面技术 , 2018, 47(1): 160-167.

[4] 黄元伟 . 铝和铝合金的腐蚀及其影响因素的评述 [J]. 上海有色金属 , 2012, 33(2): 89-95.

[5] 陈冠丞 . 6063 铝合金阳极氧化膜新型水合高温封闭抗裂性研究 [J]. 中国金属通报 , 2018(3): 69, 71.

[6] Ofoegbu S U, Fernandes F A O, Pereira A B. The sealing step in aluminum anodizing: A focus on sustainable strategies for enhancing both energy efficiency and corrosion resistance[J]. Coatings, 2020, 10(3), 226.

[7] Lee J, Jung U, Kim W, et al. Effects of residual water in the pores of aluminum anodic oxide layers prior to sealing on corrosion resistance[J]. Applied Surface Science, 2013, 283: 941-946.

[8] Zhang Y G, Chen Y L, Bian G X, et al. Electrochemical behavior and corrosion mechanism of anodized 7B04 aluminum alloy in acid NaCl environments[J]. Journal of Alloys and Compounds, 2021, 886: 161231.

[9] 芦佳明 , 王梅丰 , 王夏妍 , 等 . 三价铬和锆盐对铝阳极氧化膜的协同封闭作用 [J]. 腐蚀与防护 , 2021, 42(4): 31-35, 42.

[10] 周芝凯 , 宋丹 , 王国威 , 等 . 铝合金阳极氧化的研究进展 [J]. 热加工工艺 , 2020, 49(18): 8-11, 16.

[11] 叶秀芳 , 陈东初 , 潘学著 , 等 . 6063 铝合金阳极氧化膜无镍封孔工艺的优化 [J]. 轻合金加工技术 , 2014, 42(12): 51-56.

[12] Hao X, Zhao N, Jin H, et al. Nickel-free sealing technology for anodic oxidation film of aluminum alloy at room temperature[J]. Rare Metals, 2021, 40(4): 968-974.

[13] 余善文 . 2024-T3 铝合金硼酸 - 硫酸阳极氧化及封闭工艺研究 [D]. 武汉 : 湖北工业大学 , 2020.

[14] 全国有色金属标准化技术委员会 . GB/T 8753.1 — 2017 铝及铝合金阳极氧化氧化膜封孔质量的评定方法 第 1 部分 : 酸浸蚀失重法 [S]. 北京 : 中国标准出版社 , 2017.

[15] Quebbou Z, Chafi M, Omari L H. Corrosion resistance of 5005 aluminum alloy by anodizing treatment in a mixture of phosphoric and boric acids[J]. Materials Today: Proceedings, 2021, 37(3): 3854-3859.

[16] 吕海明 . 一种铝环保无镍封闭剂、制备方法及其封闭方法 : 中国 , CN109778284A[P], 2019-05-21.

[17] 苏东坡 , 陈润辉 , 王九发 . 一种环保型铝合金封孔剂 : 中国 , CN106191959A[P]. 2016-12-07.

[18] Hitzig J, Juttner K, Lorenz W J, et al. AC-impedance measurements on porous aluminium oxide films[J]. Corrosion Science. 1986, 24(11-12): 945-952.

[19] Sundararajan M, Devarajan M, Jaafar M. A novel sealing and high scratch resistant nanorod Ni-P coating on anodic aluminum oxide[J]. Materials Letters, 2021, 289, 129425.

[20] 杨英杰 . NaAlO 2 封孔对 2024 铝合金阳极氧化膜耐腐蚀性的影响 [D]. 南京 : 南京邮电大学 , 2019.

[21] 周艳丽 . 5052 铝合金草酸阳极氧化和铬酸阳极氧化工艺研究 [J]. 电镀与精饰 , 2021, 43(2): 34-37.

相似文献/References:

[1]黄允芳,蔡锡昌.铝型材立式阳极氧化线“两头色差”问题的研究[J].电镀与精饰,2019,(1):33.[doi:10.3969/j.issn.1001?3849.2019.01.007]
　HUANG Yunfang,CAI Xichang.Studies on the Problem of “Color Difference between Two Ends” in the Anodizing Vertical Line for the Aluminum Profile[J].Plating & Finishing,2019,(1):33.[doi:10.3969/j.issn.1001?3849.2019.01.007]
[2]王艳伟.填充工序对铝合金壳体零件铬酸阳极化色差的影响[J].电镀与精饰,2019,(7):40.[doi:10.3969/j.issn.1001-3849.2019.07.009]
　WANG Yanwei.Influence of Filling Process on Color Difference of Aluminum Alloy Shell after Chromic Acid Anodization[J].Plating & Finishing,2019,(1):40.[doi:10.3969/j.issn.1001-3849.2019.07.009]
[3]黄碧芳*,李远会,王 丽,等.铝合金磷钼酸亚铁转化体系工艺研究[J].电镀与精饰,2019,(9):29.[doi:10.3969/j.issn.1001-3849.2019.09.006]
　HUANG Bifang*,LI Yuanhui,WANG Li,et al.Study on the Conversion Process of Ferrous Phosphomolybdate on Aluminum Alloy[J].Plating & Finishing,2019,(1):29.[doi:10.3969/j.issn.1001-3849.2019.09.006]
[4]徐方强*,邹松华,张 富,等.硫酸-酒石酸钾钠宽温阳极氧化槽液体系研究[J].电镀与精饰,2019,(12):5.[doi:10.3969/j.issn.1001-3849.2019.12.002]
　XU Fangqiang*,ZOU Songhua,ZHANG Fu,et al.Research of Anodizing at Wide Temperature in Sulfuric Acid-Potassium Sodium Tartrate Bath System[J].Plating & Finishing,2019,(1):5.[doi:10.3969/j.issn.1001-3849.2019.12.002]
[5]黄允芳*,蔡锡昌.铝型材电解着色工艺向环保型工艺转换的研究[J].电镀与精饰,2019,(12):10.[doi:10.3969/j.issn.1001-3849.2019.12.003]
　HUANG Yunfang*,CAI Xichang.Studies on Environmentally Friendly Technology Transformation of Electrolytic Coloring for Al Profile[J].Plating & Finishing,2019,(1):10.[doi:10.3969/j.issn.1001-3849.2019.12.003]
[6]元 泉,邱 媛*,刘 洋,等.铝合金漆层与氧化层激光清洗应用研究[J].电镀与精饰,2019,(12):25.[doi:10.3969/j.issn.1001-3849.2019.12.006]
　YUAN Quan,QIU Yuan#,LIU Yang,et al.Research on Laser Cleaning Application for Coating and Oxide Layer of Aluminum Alloy[J].Plating & Finishing,2019,(1):25.[doi:10.3969/j.issn.1001-3849.2019.12.006]
[7]孙慧艳*,王兴雅,孙鹏飞.钛合金蓝色腐蚀检查工艺技术研究[J].电镀与精饰,2020,(1):36.[doi:10.3969/j.issn.1001-3849.2020.01.008]
　SUN Huiyan*,WANG Xingya,SUN Pengfei.Research on the Blue Corrosion Inspection Technology of Titanium Alloy[J].Plating & Finishing,2020,(1):36.[doi:10.3969/j.issn.1001-3849.2020.01.008]
[8]季 伟,孟繁东,潘科宇,等.铝合金表面油污清洗剂的制备及其腐蚀性研究[J].电镀与精饰,2021,(2):38.[doi:10.3969/j.issn.1001-3849.2021.02.0080]
　JI Wei,MENG Fandong,PAN Keyu,et al.季 伟1，孟繁东1，潘科宇1，王文军1，潘明华1，韩怡秋2，邵明亮2，刘 东3，周 勇3*[J].Plating & Finishing,2021,(1):38.[doi:10.3969/j.issn.1001-3849.2021.02.0080]
[9]王志明,高用文,陈旭丹,等.汽车行李架铝阳极氧化耐酸碱工艺开发[J].电镀与精饰,2021,(4):35.[doi:10.3969/j.issn.1001-3849.2021.04.008]
　WANG Zhiming,GAO Yongwen,et al.Development of Acid and Alkali Resistant Aluminum Anodizing Process for Automobile Luggage Rack[J].Plating & Finishing,2021,(1):35.[doi:10.3969/j.issn.1001-3849.2021.04.008]
[10]张子聪,郝建军*,赵荣兴.铝合金复合石墨烯薄膜的制备及腐蚀性能研究[J].电镀与精饰,2021,(7):15.[doi:10.3969/j.issn.1001-3849.2021.07.003]
　ZHANG Zicong,HAO Jianjun*,ZHAO Rongxing.Study on Preparation and Corrosion Performance of Aluminum Alloy Composite Graphene Film[J].Plating & Finishing,2021,(1):15.[doi:10.3969/j.issn.1001-3849.2021.07.003]
[11]凌付平 *.铝合金柠檬酸-硫酸阳极氧化及镍盐-铈盐协同封闭?/div>[J].电镀与精饰,2023,(2):35.[doi:10.3969/j.issn.1001-3849.2023.02.006]
　Ling Fuping *.Anodic oxidation of aluminum alloy in citric acid and sulfuric acid electrolyte and synergistic sealing with nickel salt and cerium salt[J].Plating & Finishing,2023,(1):35.[doi:10.3969/j.issn.1001-3849.2023.02.006]
[12]范丽娜*,张晓林,陈 锋,等.铝合金铬酸阳极化在航空领域的环保替代工艺分析[J].电镀与精饰,2023,(8):81.[doi:10.3969/j.issn.1001-3849.2023.08.013]
　Fan Lina*,Zhang Xiaolin,Chen Feng,et al.Analysis of environmental protection alternative process of chromic acid anodizing for aluminum alloy in aviation field[J].Plating & Finishing,2023,(1):81.[doi:10.3969/j.issn.1001-3849.2023.08.013]
[13]李贝贝,袁 鹏,章 凡,等.常温下铝合金阳极氧化膜的镧-有机酸复合封闭技术[J].电镀与精饰,2024,(8):91.[doi:10.3969/j.issn.1001-3849.2024.08.014]
　Lanthanum-organic acid composite sealing technique of aluminum alloy anodized film at room temperature?/html>[J].Plating & Finishing,2024,(1):91.[doi:10.3969/j.issn.1001-3849.2024.08.014]

备注/Memo

收稿日期： 2023-05-10 修回日期： 2023-05-31 作者简介： 张策（ 1996 ―），男，硕士研究生， email ： 1505713001@qq.com * 通信作者： 张德忠（ 1974 ―），男，研究员，硕士生导师，主要从事轻金属表面处理技术研发及其标准化， email ： dezhong@foxmail.com?/html>

更新日期/Last Update: 2024-01-04