[1]万一群,齐 韦,刘 兵,等.doi: 10.3969/j.issn.1001-3849.2025.08.015镀锡板钝化工艺对漆膜附着力的影响[J].电镀与精饰,2025,(08):100-106.
　Wan Yiqun,Qi Wei*,Liu Bing,et al.Effect of passivation process of tin plate on adhesive force of paint film[J].Plating & Finishing,2025,(08):100-106.
点击复制

doi: 10.3969/j.issn.1001-3849.2025.08.015镀锡板钝化工艺对漆膜附着力的影响()

《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]

卷:
期数:
2025年08
页码:
100-106
栏目:
出版日期:
2025-08-31

文章信息/Info

Title:
Effect of passivation process of tin plate on adhesive force of paint film
作者:
万一群1; 齐 韦2; 刘 兵1; 李文婷1; 宿振鹏1; 潘红良2
(1. 首钢京唐钢铁联合有限责任公司 镀锡板事业部,河北 唐山 063200 ;2. 上海务宝机电科技有限公司 节能环保部,上海 200940)
Author(s):
Wan Yiqun1;  Qi Wei2*;  Liu Bing1;  Li Wenting1;  Su Zhenpeng1;  Pan Hongliang2
(1. Shougang Jingtang United Iron&Steel Co., Ltd., Tangshan 063200, China2. Shanghai Wubao Mechatronic Technology Co., Ltd., Shanghai 200940, China)
关键词:
镀锡板; 附着力; 断裂层; 300钝化; 311钝化; 71钝化
Keywords:
tinplate;  adhesive force;  fracture layer;  300 passivation;  311 passivation;  71 passivation
分类号:
TQ153.1
文献标志码:
A
摘要:
漆膜附着力是镀锡板制罐过程中一项重要的指标，本文采用拉拔法测试了300钝化、311钝化与71钝化所得镀锡板表面漆膜的附着力，分析了拉拔断裂层的位置，研究了不同钝化工艺对镀锡板表面漆膜附着力的影响。结果表明：附着力不良与氧化膜、钝化膜的结构有直接的关系，降低氧化亚锡的量、提高钝化膜中单质铬的量和氢氧化铬的量，有利于提高镀锡板表面漆膜的附着力。
Abstract:
The adhesive force of paint film is an important index in tinplate can making process. In this paper, the adhesive force of paint film obtained by 300 passivation, 311 passivation and 71 passivation was tested by Pull-off method. The location of the fracture layer was analyzed, and the influence of different passivation processes on the adhesive force of paint film was studied. The results show that the poor adhesive force is directly related to the structure of oxide film and passivation film. Reducing the amount of stannous oxide, increasing the amount of elemental chromium and chromium hydroxide in passivation film is conducive to improving the adhesive force between tinplate and paint film

参考文献/References:

[1].李建中, 厉英. 冷轧薄钢板表面镀锡/镀铬技术[M]. 北京: 科学出版社, 2016: 102-235.
[2].中国罐头工业协会科技工作委员会. 马口铁食品三片罐工艺技术[M]. 北京: 中国轻工业出版社, 2008: 43-117.
[3].潘伯城. 浅析马口铁印刷中的附着力问题[J]. 印刷技术, 1998(3): 23-25.
[4].王云年. 印铁制罐业有关“涂膜附着力”的影响因素[J]. 包装与食品机械, 2001, 19(2): 34-35.
[5].王章薇, 游波. 食品包装涂层用树脂对镀锡板基材附着性能的影响[J]. 涂料工业, 2021, 51(12): 7-13.
[6].张鹏, 刘连喜, 孙力, 等. 环氧酚醛涂料印铁工艺对镀锡板附着力影响的正交研究[J]. 河北冶金, 2018(1): 34-37.
[7].周谦永, 谢龙, 李兵虎, 等. 镀锡板多次印涂烘烤后附着力不良的试验研究[C]//第六届中国金属学会青年学术年会论文集. 北京: 第六届中国金属学会青年学术年会, 2012: 371-373.
[8].刘连喜, 李静, 张鹏. 镀锡基板表面粗糙度对涂印附着力的影响及工艺优化研究[J]. 河北冶金, 2018(10): 63-65, 62.
[9].宋浩, 方圆, 石云光, 等. 镀锡板边部漆膜附着力影响因素研究[J]. 电镀与精饰, 2022, 44(11): 47-52.
[10].曾林, 李宁, 黎德育. 电镀锡薄钢板氧化膜和钝化膜的分析检测方法[J]. 电镀与精饰, 2010, 29(11): 41-45.
[11].Aubrun P, Rocquet P. The mechanism of metallic chromium electrodeposition in the cathodic dichromate treatment of tinplate[J]. Journal of the Electrochemical Society, 1975, 122(7): 861-865.
[12].Bastidas J M, Cabanes J M, Catala R. Effect of passivation treatment and storing on adhesion and protective properties of lacquered tinplate cans[J]. Journal of Coatings Technology, 1997, 69(8): 67-75.
[13].Melvin C, Jewell E, Miedema J, et al. Identifying interlayer surface adhesion failure mechanisms in tinplate packaging steels[J]. Packaging Technology and Science, 2019, 32(7): 345-355.

相似文献/References:

[1]程宝改,李宝增,谢美芳,等.喷砂对水性涂装漆膜形貌与性能的影响[J].电镀与精饰,2019,(7):31.[doi:10.3969/j.issn.1001-3849.2019.07.007]
　CHENG Baogai,LI Baozeng,XIE Meifang,et al.Influence of Sandblasting on Morphology and Adhesion of Water-Borne Film[J].Plating & Finishing,2019,(08):31.[doi:10.3969/j.issn.1001-3849.2019.07.007]
[2]陈 婧.对涂装产品划格检验附着力的几点建议[J].电镀与精饰,2019,(10):33.[doi:10.3969/j.issn.1001-3849.2019.10.008]
　CHEN Jing.Several Suggestions about Adhesion Test on Layout Inspection of Painted Products[J].Plating & Finishing,2019,(08):33.[doi:10.3969/j.issn.1001-3849.2019.10.008]
[3]李红艳*,李增权,徐明磊.Ce2O3的颗粒度对农机涂装附着力的影响[J].电镀与精饰,2020,(9):11.
　LI Hongyan*,LI Zengquan,XU Minglei.Effect of Particle Size of Ce2O3 on Adhesion of Agricultural Machinery Coating[J].Plating & Finishing,2020,(08):11.
[4]王 慧,郭秀珍,关海英,等.刀具/齿轮钢表面TiSiCN涂层结构和性能[J].电镀与精饰,2022,(5):1.[doi:10.3969/j.issn.1001-3849.2022.05.001]
　WANG Hui,GUO Xiuzhen,GUAN Haiying,et al.Microstructure and Properties of TiSiCN Coatings on the Surface of Tool/Gear Steel[J].Plating & Finishing,2022,(08):1.[doi:10.3969/j.issn.1001-3849.2022.05.001]
[5]宋 浩 *,方 圆,石云光,等.镀锡板边部漆膜附着力影响因素研究[J].电镀与精饰,2022,(11):47.[doi:10.3969/j.issn.1001-3849.2022.11.009]
　SONG Hao *,FANG Yuan,SHI Yunguang,et al.Study of Influence Factors on the Edge Lacquer Adhesion of Tinplate[J].Plating & Finishing,2022,(08):47.[doi:10.3969/j.issn.1001-3849.2022.11.009]
[6]周桂海*,王德智,胡宏卫.电感耦合等离子原子发射法测定镀锡板中钝化锆[J].电镀与精饰,2022,(11):95.[doi:10.3969/j.issn.1001-3849.2022.11.017]
　ZHOU Guihai*,WANG Dezhi,HU Hongwei.Determination of Passivated Zirconium of Tin Plate by Inductively Coupled Plasma Atomic Emission Spectrometry[J].Plating & Finishing,2022,(08):95.[doi:10.3969/j.issn.1001-3849.2022.11.017]
[7]陈婧*.粗糙度对水性涂料涂装膜层结合力的影响?/div>[J].电镀与精饰,2022,(12):25.[doi:10.3969/j.issn.1001-3849.2022.12.004]
　CHEN Jing *.Effect of Roughness on Adhesion of Waterborne Coatings[J].Plating & Finishing,2022,(08):25.[doi:10.3969/j.issn.1001-3849.2022.12.004]
[8]宋浩,杨鸿建,吴明辉*,等.镀锡板硫化斑分析及控制工艺研究[J].电镀与精饰,2022,(12):54.[doi:10.3969/j.issn.1001-3849.2022.12.008]
　SONG Hao,YANG Hongjian,WU Minghui*,et al.Analysis and Control Technology of Sulfide Staining on Tinplate[J].Plating & Finishing,2022,(08):54.[doi:10.3969/j.issn.1001-3849.2022.12.008]
[9]杨 岭,潘应君*,郑世恩,等.石墨表面磁控溅射钛膜的结构与工艺参数研究[J].电镀与精饰,2023,(3):11.[doi:10.3969/j.issn.1001-3849.2023.03.002]
　Yang Ling,Pan Yingjun*,Zheng Shien,et al.Structure and process parameters of titanium films prepared by magnetron sputtering on graphite[J].Plating & Finishing,2023,(08):11.[doi:10.3969/j.issn.1001-3849.2023.03.002]
[10]万一群,齐韦*,沈鹏杰,等.基板表面形貌对镀锡板润湿能力影响的研究[J].电镀与精饰,2023,(4):38.[doi:10.3969/j.issn.1001-3849.2023.04.007]
　Wan Yiqun,Qi Wei*,Shen Pengjie,et al.Study on blackplate surface morphology effect on wettability for tinplate[J].Plating & Finishing,2023,(08):38.[doi:10.3969/j.issn.1001-3849.2023.04.007]
[11]许姣姣*.镀锡板铬酸钝化工艺研究[J].电镀与精饰,2021,(7):56.[doi:10.3969/j.issn.1001-3849.2021.07.011]
　XU Jiaojiao*.Process Research of Chromic acid Passivation on the Tinplate[J].Plating & Finishing,2021,(08):56.[doi:10.3969/j.issn.1001-3849.2021.07.011]

更新日期/Last Update: 2025-08-11