[1]吴 群*,于鲁萍.电工纯铁发蓝异常的分析和处理[J].电镀与精饰,2022,(11):91-94.[doi:10.3969/j.issn.1001-3849.2022.11.016]
WU Qun*,YU Lupinng.Analysis and Treatment of Abnormalities of Electromagnetism Pure Iron After Bluing[J].Plating & Finishing,2022,(11):91-94.[doi:10.3969/j.issn.1001-3849.2022.11.016]
点击复制
WU Qun*,YU Lupinng.Analysis and Treatment of Abnormalities of Electromagnetism Pure Iron After Bluing[J].Plating & Finishing,2022,(11):91-94.[doi:10.3969/j.issn.1001-3849.2022.11.016]
电工纯铁发蓝异常的分析和处理
《电镀与精饰》[ISSN:1001-3849/CN:12-1096/TG]
卷:
期数:
2022年11
页码:
91-94
栏目:
出版日期:
2022-11-15
- Title:
- Analysis and Treatment of Abnormalities of Electromagnetism Pure Iron After Bluing
- Keywords:
- electromagnetism pure iron ; bluing ; white precipitates ; red frosting ; indentations
- 分类号:
- TG174.451
- 文献标志码:
- A
- 摘要:
- 某电工纯铁产品发蓝后表面容易出现白色析出物、压痕以及红色挂霜等异常现象。结合该产品实际机械加工过程，深入分析异常发生的原因。研究结果表明：控制机械加工尺寸，细化清洗要求，控制槽液浓度以及加强发蓝过程夹具抖动，可以消除上述发蓝后的异常问题，提高产品质量。
- Abstract:
- ： A series of unexpected appearances were presented on the surface of electromagnetism pure iron after bluing ， including white precipitates ， indentations and red frosting and so on. A deeply analysis of these abnormal phenomena combined with the actual machining process was made. The analytic results indicate that quality promotion of product could be controlled by machining precision ， accurate cleanliness ， concentration of bath solution and waggle stepped-up of fixture during bluing process to overcome the disadvantages mentioned above.
参考文献/References:
[1] 陈进 . 钢件氧化工艺生产实践浅谈 [J]. 电镀与环保 ,2014, 34(4): 55-56.
[2] 冯欣 , 柳东 , 刘旭华 . 添加剂对钢铁发蓝处理工艺和发蓝膜性能的影响 [J]. 天津冶金 , 2014, 31(2): 99-101.
[3] 崔志强 , 瞿嘉尾 , 谢婷婷 . 冷变形碳钢发蓝处理工艺及性能的研究 [J]. 广州化工 , 2015, 43(18): 60-62.
[4] 何成利 , 戎国灿 . 钢铁零件碱性化学氧化工艺改进 [J]. 电镀与精饰 , 2012, 34(6): 30-32.
[5] 郑瑞庭 . 防止钢铁发蓝产生红色挂霜的措施 [J]. 电镀与精饰 , 2001, 23(6): 21-23.
备注/Memo
收稿日期： 2020-10-29 修回日期： 2022-09-01 作者简介： 吴群（ 1982 —），女，硕士，工程师， email ： wuuqunn@163.com?/html>
更新日期/Last Update:
2022-11-12