SUN Huiyan*,WANG Xingya,SUN Pengfei.Research on the Blue Corrosion Inspection Technology of Titanium Alloy[J].Plating & Finishing,2020,(1):36-40.[doi:10.3969/j.issn.1001-3849.2020.01.008]
钛合金蓝色腐蚀检查工艺技术研究
- Title:
- Research on the Blue Corrosion Inspection Technology of Titanium Alloy
- Keywords:
- titanium alloy; blue corrosion; defect inspection; anodic oxidation
- 文献标志码:
- A
- 摘要:
- 钛合金材料在飞机发动机上的应用越来越广泛，为提高其使用的安全性和可靠性，解决采用硝酸/氢氟酸方法时存在的判别缺陷种类少、不清晰、易造成误判等技术难题，采用重量损失法和观察不同条件下氧化膜表面形貌的方法研究了蓝色阳极氧化溶液浓度、pH值、电压等参数对氧化膜层质量的影响，确定了蓝色阳极氧化溶液浓度及工艺参数（Na3PO4·12H2O 100～125 g/L、pH 8~9、电压30±1 V），优选了钛合金活化溶液的配方（HNO3 42.8%～66.6%，HF 4.5%～7.5%）。研究结果表明，通过最终确定的活化溶液、阳极氧化溶液和工艺条件，可以获得色调鲜明，均匀的浅蓝色至蓝灰色背景的氧化膜，缺陷与背景颜色之间能够形成最大的对比度，便于零件表面缺陷的检查。
- Abstract:
- Titanium alloys are widely used in aircraft engines. In order to improve the safety and reliability of its application, and to solve the technical problems such as few kinds of defects, unclear and easy to cause misjudgment when using nitric acid / hydrofluoric acid method, the influences of concentration, pH value, voltage and other parameters of blue positive oxidation solution on the quality of oxide film were studied by weight loss method and observing the surface morphology of oxide film under different conditions. The concentration and process parameters of blue anodic oxidation solution were determined as concentration of Na3PO4·12H2O 100-125 g/L,pH 8-9 and voltage 30±1 V. The formula of activation solution for titanium alloy was optimized (HNO3 42.8%-66.6%, HF 4.5%-7.5%). The results show that through the final determined activation solution, anodizing solution and process conditions, the oxide film with bright color and uniform light blue to blue gray background can be obtained, and the maximum contrast between defect and background color can be formed, which is convenient for the inspection of surface defects of parts.
参考文献/References:
[1] 钱九红. 航空航天用新型钛合金的研究发展及应用[J]. 稀有金属, 2000, 24(3): 218-223.
[2] 李亚江, 刘坤. 钛合金在航空领域的应用及其先进连接技术[J]. 航空制造技术, 2015, 16: 34-38.
[3] 陶春虎, 刘昌奎, 缪宏博, 等.航空用钛合金的失效及其预防[M]. 北京: 国防工业出版社, 2013.
[4] 姜应律, 天荫顺. 利用极化曲线推测中性水溶液中钛合金表面的氧化还原反应机理[J]. 北京科技大学学报, 2004, 4: 395-399.
相似文献/References:
[1]李 江,李 博*,刘小强,等.钛合金多孔零件内外表面一次镀铬工艺研究[J].电镀与精饰,2020,(7):38.[doi:10.3969/j.issn.1001-3849.2020.07.0080]
LI Jiang,LI Bo*,LIU Xiaoqiang,et al.Study on Chromium Plating Process of Porous Parts of Titanium Alloy[J].Plating & Finishing,2020,(1):38.[doi:10.3969/j.issn.1001-3849.2020.07.0080]
[2]杨 堃*,张 明,孙小岚.TC2、TC6表面喷涂WC-17Co与电镀铬耐磨性能对比[J].电镀与精饰,2021,(10):26.[doi:10.3969/j.issn.1001-3849.2021.10.005]
YANG Kun*,ZHANG Ming,SUN Xiaolan.Wear Resistant Comparison of Spraying WC-17Co Coating and Chromium Plating on the Surface of TC2 and TC6[J].Plating & Finishing,2021,(1):26.[doi:10.3969/j.issn.1001-3849.2021.10.005]
[3]詹中伟,葛玉麟,田礼熙*,等.搅拌速度和颗粒尺寸对复合电沉积Ni-cBN复合量的影响及机理分析[J].电镀与精饰,2022,(1):1.[doi:10.3969/j.issn.1001-3849.2022.01.001]
ZHAN Zhongwei,GE Yulin TIAN Lixi*,WANG Shuaixing,et al.Effect of Stirring Speed and Particle Size on the Particle Content in the Ni-cBN Composite Plating and Its Mechanism[J].Plating & Finishing,2022,(1):1.[doi:10.3969/j.issn.1001-3849.2022.01.001]
[4]赵明欣,赵 旭*,郎小尘.钛合金表面超疏水膜的制备及其耐蚀性与机械稳定性[J].电镀与精饰,2024,(2):44.[doi:10.3969/j.issn.1001-3849.2024.02.007]
Zhao Mingxin,Zhao Xu *,Lang Xiaochen.Preparation and corrosion resistance and mechanical stability of superhydrophobic film on titanium alloy[J].Plating & Finishing,2024,(1):44.[doi:10.3969/j.issn.1001-3849.2024.02.007]
[5]李建普,卢旭东*,李冬冬.舰用钛合金及铬涂层抗氧化和腐蚀性能研究[J].电镀与精饰,2024,(5):65.[doi:10.3969/j.issn.1001-3849.2024.05.010]
Li Jianpu,Lu Xudong*,Li Dongdong.Research on oxidation resistance and corrosion resistance of marine titanium alloy and chromium coating[J].Plating & Finishing,2024,(1):65.[doi:10.3969/j.issn.1001-3849.2024.05.010]
[6]收稿日期： 0-0-8 修回日期： 0-0-.钛合金脉冲电沉积 Cu-WC 复合镀层的硬度与摩擦磨损性能[J].电镀与精饰,2024,(11):58.
Hardness and friction and wear property of Cu-WC composite coating on titanium alloy prepared by pulse electrodeposition Feng Xujia 1 Sun Hao 1* Gao Chenjing 2 Zhu Qingqin 1[J].Plating & Finishing,2024,(1):58.
[7]陈俊豪,刘 刚,王帅星,等.doi: 10.3969/j.issn.1001-3849.2025.04.016添加剂对TA12钛合金化学铣切性能的影响[J].电镀与精饰,2025,(04):101.
Chen Junhao,Liu Gang*,Wang Shuaixing,et al.Influence of additive on the chemical milling performance of TA12 titanium alloy[J].Plating & Finishing,2025,(1):101.
备注/Memo
收稿日期： 2019-08-10；修回日期： 2019-09-18
通信作者： 孙慧艳， email: shylmgs@163.com